Spark plug gap

[Dylan]

Could n e 1 with a RK manual please tell me what the spark plug gap should be??? Thanks a lot

Dyl

[Chills]

Just checked...

0.7 - 0.8 mm (0.028-0.031 in)

BTW Have got the manual from Keith and have scanned it. Am just finding the best way to make it available to you all. Upload? ~17mb min (Zipped).

[G]

[Dylan]

Thanks!!! I might be doing a power run on a dyno today, so i wanted to have everything right!!
DYl

[Chills]

[Dylan]

If i sent u a blank cd and a SAE and some cash would u be able to burn the whole 200dpi full colour version onto a CD????
Thanks
Dyl

[Chills]

[G]

autofeed.... grrrnffll... I recently got a new scanner for £30... not very fast as you might Imagine.
You'll probably have trouble emailing it unless you break it up... I scanned some stuff for Peje at 300dpi and my email server wouldn't let an 8mb file through... You could try WinRAR or similar that lets you break it up.

Putting it in HTML/acrobat etc should significantly save space as the big gaps/text will take up significantly less space.

If I could send you SAE & Cd for the whole manual I'll see what I can do; it's as good a way as any to learn php :)

[Chills]

[Chills]

[Chills]

[G]

Oh well... I've got cable but it's probably just ntl being crappy ... morpheous would be good for me though.

If it's not too much trouble do you reckon you could try emailing the whole thing over night or something... don't worry if it's trouble or you actually want to use your adsl for the coupla hours it'll take... I'm really not that bothered though and I'll be away until wednesday anyway.

[G]

Oh yeh, the web space thing *probably* won't work that well afaik most free web space has fairly strinigent bandwith limits ie about 100mb/month.

[Chills]

[G]

Cheers.. I meant the big un and thus the overnight bit. The small one will be fine though, as I said I'm trying to learn php... which may take a little while anyway :), so lower quality will be just as good for messing about with.

[Chills]

[G]

I checked at lunch time and it hadn't arrieved... ntl may well have eaten it, as I said I've got a long weekend off so I'm not too bothered

[Dylan]

I sent you my address, not sure how we can repay your efforts, i dont think n e 1 else could have been bothered to scan it in, good job you had your autoscan thingy!!! I didnt do the dyno run today because i got a flat battery leaving school, the battery was made in 1982, so no wonder it was naked!!!! Might do a dyno run on Monday afternoon if ive got the free lesson time, then ill see if i can get a printout, probably loads of flat spots!!!!!
All the best
Dylan

[Chills]

[Dylan]

Thanks very much. The battery only cost £20 for a sealed type. This dyno run should also help me see if its restricted or not (sure it isnt).
Dyl

[TJ NSR]

if i send u a blank CD, will u copy the high quality file onto the cd plz mate?

thanks

[Krank]

could someone who has that manual check how you should adjust the carb jets.(according to what i know the pilot jet should be 2½ turns out but i´ve got no clue of the others)