Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


what reasons for carb leak?

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

steppen22
World Chat Champion



Joined: 18 Feb 2008
Karma :

PostPosted: 23:21 - 04 Mar 2009    Post subject: what reasons for carb leak? Reply with quote

I wondered what are the common reasons for carb leaking/weeping?

I got out the scootay today, and it stunk of petrol. I noticed that the carb is leeaking, from the breather tube. What are the causes to investigate? Damaged needle? Float bowl? I hoped instant gasket would save me. Alas, no. I'd rather fix than replace, as I hardly use the scootay.


Please advise.
Cheers.

https://img10.imageshack.us/img10/2195/carb.jpg
https://img10.imageshack.us/img10/2195/carb.jpg
____________________
no regrets, no retreat, no apology.
I've made mistakes in the past, and I apologise for FUCK ALL.
 Back to top
View user's profile Send private message You must be logged in to rate posts

KevTM
World Chat Champion



Joined: 15 Apr 2004
Karma :

PostPosted: 23:30 - 04 Mar 2009    Post subject: Reply with quote

Is that a breather or an overflow? could just be a stuck float perhaps. If it's leaking from the pipe why instant gasket around the float bowl face? unless you know the proper seal isn't in there (o-ring maybe.. which would cause petrol t leak through into that pipe i would have thought)..

whip it off and find out Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Artist
Super Spammer



Joined: 06 Jan 2008
Karma :

PostPosted: 00:19 - 05 Mar 2009    Post subject: Reply with quote

that carb needs an outside clean aswell as an inside one.

Usually, float gets stuck down so when bowl fills with fuel, it keeps pouring in, overflows and pours out into air box/breather/engine.

Could be other things though, although that is your best bet, try tapping the float bowl to loosen up float or for permanent fix, remove carb, undo the 4 screws on teh float bowl and clean out with carb cleaner or similar.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

S1KE
Brolly Dolly



Joined: 20 May 2007
Karma :

PostPosted: 09:07 - 05 Mar 2009    Post subject: Reply with quote

Could be the needle valves need replacing as they are not shutting off properly, I had to do it on the zxr, cost me like 80 quid for a set Thumbs Up
____________________
random twat!
* xbox live mickeyc26
* zx6r b1h 2004 GREEN !
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 17 years, 189 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.44 - MySQL Queries: 13 - Page Size: 40.15 Kb