Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Check your nuts

 Reply to topic
Bike Chat Forums Index -> Found on the 'Net
View previous topic : View next topic  
Author Message

aaronb74
Crazy Courier



Joined: 05 Aug 2008
Karma :
PostPosted: 08:23 - 05 Jun 2009    Post subject: Check your nuts Reply with quote
Why before thrashing your car, use some good quality wheel nuts and tighten them up good, but not too much....

Clicky
____________________
Current bike - 2006 ZX6R
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Artist
Super Spammer



Joined: 06 Jan 2008
Karma :
PostPosted: 12:47 - 05 Jun 2009    Post subject: Reply with quote
That happened to me in a pug 306 on a dual carriageway after a tyre change.

Grinding noise, like something was rubbing. Stopped and checked everything was ok. Everything looked ok so we carried on, boom and the front left wheel disappears into the distance.

Garage had over tightened the wheel nuts
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Acemastr
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 13:01 - 05 Jun 2009    Post subject: Reply with quote
looks a bit... too... surgical really, all 4 coming off at once. would be fairly iffy though.
____________________
2017 KTM 350 XC-F - 2014 Yamaha R6 - 2005 Yamaha YZ125
2016 Toyota Tacoma Limited
 Back to top
View user's profile Send private message You must be logged in to rate posts

Phoenix
Twisted Firestarter



Joined: 01 Aug 2002
Karma :
PostPosted: 13:56 - 05 Jun 2009    Post subject: Reply with quote
Ouch, surely that looks like he's just totally forgotten to tighten them up? They count them all so presumably they're all ok and not broken, and it's nuts not bolts as you can see threads sticking out of hubs so coould more easily be left loose by accident and have wheels remain on for longer.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

The View Askew
World Chat Champion



Joined: 29 Nov 2005
Karma :
PostPosted: 23:38 - 05 Jun 2009    Post subject: Reply with quote
For best results, torque up wheel nuts by hand.


Leccy wrenches are for taking them off.
____________________
"Do what you always did, get what you always got"
 Back to top
View user's profile Send private message You must be logged in to rate posts

GeorgeCBR
Scooby Slapper



Joined: 07 Apr 2007
Karma :
PostPosted: 15:27 - 06 Jun 2009    Post subject: Reply with quote
Acemastr wrote:
looks a bit... too... surgical really, all 4 coming off at once. would be fairly iffy though.


If the person who fitted them gunned them all up with the same gun at the same torque, most chance is theyre all under the same amounts of stress. I suppose then it's fairly possible for them all to go at once.
____________________
|| Ride - Kawasaki Z1000 & Honda Bali 50 || Theory - Passed || Practical - Passed ||

Previous || Suzuki Bandit 600N - Honda CBR 125 - Gilera Runner 50
 Back to top
View user's profile Send private message You must be logged in to rate posts

OssY
Nearly there...



Joined: 12 Jan 2009
Karma :
PostPosted: 00:18 - 09 Jun 2009    Post subject: Reply with quote
MUAHAHAHA, same thing happened to me in a long wheelbase Mercedes Sprinter. Rear wheel overtook me. ooops.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Mac_Black
World Chat Champion



Joined: 25 Nov 2007
Karma :
PostPosted: 21:41 - 09 Jun 2009    Post subject: Reply with quote
OssY wrote:
MUAHAHAHA, same thing happened to me in a long wheelbase Mercedes Sprinter. Rear wheel overtook me. ooops.


Except for the guy in the video now might be looking at replacing four damaged disks and four hubs if the threads have been damaged. As well as the skirt and rear bumper that he's just ripped into.
Ouch
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jack_zxr400
World Chat Champion



Joined: 15 Jul 2008
Karma :
PostPosted: 21:52 - 09 Jun 2009    Post subject: Reply with quote
Mac_Kaliba wrote:
OssY wrote:
MUAHAHAHA, same thing happened to me in a long wheelbase Mercedes Sprinter. Rear wheel overtook me. ooops.


Except for the guy in the video now might be looking at replacing four damaged disks and four hubs if the threads have been damaged. As well as the skirt and rear bumper that he's just ripped into.
Ouch


will be the garage doing it all for free i would of thought..
____________________
Previous Bike: ZXR 400
Current Bike: R6
Test Date: 8/8/2008-PASSED
 Back to top
View user's profile Send private message You must be logged in to rate posts

Jrod
Page 3 Girl



Joined: 02 Aug 2004
Karma :
PostPosted: 22:06 - 09 Jun 2009    Post subject: Reply with quote
If its what I remember the nuts used were the wrong size,they tightened up but as soon as force was put on them just pulled straight off.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

binge
Emo Kiddy



Joined: 02 Jul 2004
Karma :
PostPosted: 22:38 - 09 Jun 2009    Post subject: Reply with quote
Soul_Trader wrote:
For best results, torque up wheel nuts by hand.


Leccy wrenches are for taking them off.



Depends on the fitter really. My Air Gun is only a 3/8" Drive. But its got enough reverse torque to take off most wheel nuts.
Its also got a regulator for putting them back on. So you cant over tighten them.

Then obvs grab the torque wrench and take them to 110 / 120 or whatever.





Ben
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Mac_Black
World Chat Champion



Joined: 25 Nov 2007
Karma :
PostPosted: 00:44 - 10 Jun 2009    Post subject: Reply with quote
Pug205er wrote:
If its what I remember the nuts used were the wrong size,they tightened up but as soon as force was put on them just pulled straight off.


What as in a non standard pitch?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Jrod
Page 3 Girl



Joined: 02 Aug 2004
Karma :
PostPosted: 06:55 - 10 Jun 2009    Post subject: Reply with quote
Yep, mazda use 1.25 pitch instead iirc?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

trevoriv
World Chat Champion



Joined: 04 Jun 2005
Karma :
PostPosted: 20:17 - 10 Jun 2009    Post subject: Reply with quote
Here are your well earned fail cakes.

Im sure I could see about 7 wheels bouncing around at some point!
____________________
Past: '96 Thundercat, '02 ZX636R (A1P), '58 KTM 690 SM LC4 Current: '06 ZX636R (C6F)
Mudskipper wrote: Someone just has to sig that...
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Drew This post is not being displayed because the poster is banned. Unhide this post / all posts.

Timmeh
World Chat Champion



Joined: 01 Nov 2006
Karma :
PostPosted: 00:52 - 17 Jun 2009    Post subject: Reply with quote
buy a bike
____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you
 Back to top
View user's profile Send private message You must be logged in to rate posts

cyberglass
World Chat Champion



Joined: 28 Jun 2005
Karma :
PostPosted: 05:16 - 17 Jun 2009    Post subject: Reply with quote
Not really the same but one of my mates managed to destroy a near new alloy wheel with a Maplins impact wrench. He used it to tighten the nuts up but over did it and split the wheel in 3 places MUPPET Laughing


That video for some reason reminds me of the coyote in the roadrunner cartoons wonder if he was using ACME bolts Mr. Green
____________________
DL650 Vstrom 2004
DRZ400S 2003
Yamaha R1 2005
 Back to top
View user's profile Send private message You must be logged in to rate posts

dgo1212
Brolly Dolly



Joined: 06 Dec 2008
Karma :
PostPosted: 17:25 - 17 Jun 2009    Post subject: Reply with quote
Drew wrote:

I see garages using torque wrench, after using the windy gun. So they windy it up to well over the recommended torque, then using torque wench, give it one 'click' then assume is is set at the correct torque, when in fact the torque wench made no difference to the tightness as the nut/bolt is already well over the recommended.
[/speech]


could be that the airgun is on the lowest setting just to run the nuts up and seat the wheel then torqued up after,(we have a new rule where we're no longer aloud to blast 17mm wheelnuts up with the gun as they're difficult to remove)so the breaker bar is used to tighten after running up with gun
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

binge
Emo Kiddy



Joined: 02 Jul 2004
Karma :
PostPosted: 20:13 - 17 Jun 2009    Post subject: Reply with quote
Drew wrote:
Soul_Trader wrote:
For best results, torque up wheel nuts by hand.


I see garages using torque wrench, after using the windy gun. So they windy it up to well over the recommended torque, then using torque wench, give it one 'click' then assume is is set at the correct torque, when in fact the torque wench made no difference to the tightness as the nut/bolt is already well over the recommended.

[/speech]




Alot of fitters do. I think the Torque wrench "click" after is just a check to see if they are tight enough. Rather than torqued to the correct setting.

Again, My Air gun has variable settings. So I just keep it on the lowest setting just to get the nuts on in quick time.



Ben
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 238 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Found on the 'Net All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.77 - MySQL Queries: 13 - Page Size: 102.71 Kb