Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


RANDOM TIMING QUESTION

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

stirlinggaz
World Chat Champion



Joined: 22 Jul 2007
Karma :
PostPosted: 18:26 - 27 Jul 2009    Post subject: RANDOM TIMING QUESTION Reply with quote
Hi all,
i have a cdi in my hand. (thanks to another thread)
& it looks like someone has modified/bodged it.
the casing has been cut & protruding from the cut bit,surrounded by sealant is a tiny little adjusting screw & next to it, etched into the plastic is "clockwise-advance"
im presuming this is in relation to the timing.
but what effect would it have, to have it adjustable?
& why?
cheers,
GAZ
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Burnzy1989
Nitrous Nuisance



Joined: 06 Apr 2009
Karma :
PostPosted: 18:41 - 27 Jul 2009    Post subject: Re: RANDOM TIMING QUESTION Reply with quote
stirlinggaz wrote:
Hi all,
i have a cdi in my hand. (thanks to another thread)
& it looks like someone has modified/bodged it.
the casing has been cut & protruding from the cut bit,surrounded by sealant is a tiny little adjusting screw & next to it, etched into the plastic is "clockwise-advance"
im presuming this is in relation to the timing.
but what effect would it have, to have it adjustable?
& why?
cheers,
GAZ


It could be possible that it is used to control a variable resistor which might adjust the ignition timing or control power to something .
 Back to top
View user's profile Send private message You must be logged in to rate posts

stirlinggaz
World Chat Champion



Joined: 22 Jul 2007
Karma :
PostPosted: 19:17 - 27 Jul 2009    Post subject: Reply with quote
hi,
yes, its the little plastic adjusters you see on variable resistors & im presuming it controls/adjusts the timing, but what would be the advantage to that?
would there be any advantage?
would there be any point?
cheers,
GAZ
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Blue_SV650S
World Chat Champion



Joined: 27 Nov 2008
Karma :
PostPosted: 20:35 - 27 Jul 2009    Post subject: Reply with quote
stirlinggaz wrote:
hi,
yes, its the little plastic adjusters you see on variable resistors & im presuming it controls/adjusts the timing, but what would be the advantage to that?
would there be any advantage?
would there be any point?
cheers,
GAZ


Sounds like it - someone is Cool

Broadly speaking, the more advanced the timing, the more power the bike will have. If you go too far mind you, you can cause the motor to go pop (consider making the full force of the BANG as the piston is still on its way up - that isn't going to end well is it!! Wink).

Why have they made it adjustable? Coz they could?? Thinking

Perhaps they were experimenting with different grade fuels or 'squish'. The 'octane' in fuel helps reduce the onset of pre-ignition (igniting too early and forcing the piston back) so in theory, you can run a more advanced ignition with say 102 octane fuel than with say 92 octane. He might have been trying to get the benefits of higher octane fuel. Most bikes will be set up for say 92RON (octane) so you can get more power without damaging the engine by lobbing in 102RON and advancing the ignition ... the trick is to know/judge how far!! Wink

I guess he advanced it as far as he could before getting the signs of 'pinking' Thumbs Up

in short, don't randomly twiddle, you might end up with ignition that was too far advanced and it go pop!! Shocked
____________________
The purpose of life is to fight maturity.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Burnzy1989
Nitrous Nuisance



Joined: 06 Apr 2009
Karma :
PostPosted: 11:22 - 28 Jul 2009    Post subject: Reply with quote
What bike is it off ?
 Back to top
View user's profile Send private message You must be logged in to rate posts

stirlinggaz
World Chat Champion



Joined: 22 Jul 2007
Karma :
PostPosted: 18:06 - 28 Jul 2009    Post subject: Reply with quote
Burnzy1989 wrote:
What bike is it off ?

f*cked if i know, lol
found it in my big tub of random leccy bits.
think its of a small suzuki 2 stroke,
cheers,
GAZ
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 17 years, 51 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.77 - MySQL Queries: 13 - Page Size: 49.33 Kb