Powervalves.

[BenR]

Hi all just won these https://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260457468722&ru=http%3A%2F%2Fshop.ebay.co.uk%3A80%2F%3F_from%3DR40%26_trksid%3Dm38%26_nkw%3D260457468722%26_fvi%3D1&_rdc=1#ht_500wt_1182
Does anybody know if I can get the springs separately at all?
____________________
Current bikes: suzuki RG125UN wolf. Yamaha MT-07

[Frost]

They don't have springs.
They have a pin through the eye (recommend getting new ones as they tend to snap letting the valve hit the piston fucking both and the barrel). The pin has an arm connected to it, this is connected to the wheel thingy, which is connected by cables to the actuator.

Those are the weaker 3 part valves, so i would HIGHLY recommend checking them all over for tiny cracks.

[BenR]

Cheers but they definately have small springs that sit inside the retainers, I guess to hold some tension on the blades.
____________________
Current bikes: suzuki RG125UN wolf. Yamaha MT-07

[Frost]

A quick googling gave me this:

https://thetuningworks.com/shop/product_info.php?products_id=373&osCsid=a3ee1eface97aaf9

fuck knows where they go though! Mine never had them!

[kat250]

There are 2 little springs that go into the valve itself and are retained by a plate on top. Its been about a month or so since i rebuilt a set and there are defiantly 2 springs per set of valves (rebuilt rgv250 set)
____________________
in the famous word of jimmy pop "would you F*ck me for blow"
In the words of banditshigh "would you blow me to f*ck"

[BenR]