Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


aprilia rs125 help

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

mike2191
L Plate Warrior



Joined: 12 Sep 2009
Karma :

PostPosted: 19:08 - 12 Sep 2009    Post subject: aprilia rs125 help Reply with quote

help with aprilia rs125 my bike starts and goes till it gets to ab8 6000rpm and then it kangos got told was power vavle cable so got a new 1 now it still the same if not worse any 1 help me out
____________________
m johnson
 Back to top
View user's profile Send private message You must be logged in to rate posts

stirlinggaz
World Chat Champion



Joined: 22 Jul 2007
Karma :

PostPosted: 16:35 - 13 Sep 2009    Post subject: Reply with quote

Hi,
does the kangarooing stop when you get past 6000rpm?
you taken the pv blade out & cleaned it recently?
it could be all gummed up & is sticking, though i very much doubt it.
most problems i had on the rs were carb related, usually due to someone else trying to "set it up"
return the carb to stock settings.
use the oem airbox.
fit a new spark plug & start from there.
is the pv cable correctly tensioned like it says in manual?
cheers,
GAZ
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

gazuk
L Plate Warrior



Joined: 23 Jul 2009
Karma :

PostPosted: 10:48 - 15 Sep 2009    Post subject: Reply with quote

hi, i have the same problem with my rs but mine is at 7000rpm.
my engine has just had a full engine rebuild and cleaned everything as she was being rebuilt. iv done 130 mile since the rebuild and thought i would try out the pv only to find it kangaroos,its ok in 1st but not in the rest. cleaned the carb out but still the same. any1 got any suggestion's. thx gaz
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 12:57 - 15 Sep 2009    Post subject: Reply with quote

Hi

Power valve doesn't open until around 8000 so it shouldn't be that.

Suppose if the cable is over tensioned then it would hold the power valve slightly open which might cause odd issues.

If the problem occurs between 5000 and 6000rpm (but fine outside that range) then I would say it is possibly something to do with the environmental dip.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

gazuk
L Plate Warrior



Joined: 23 Jul 2009
Karma :

PostPosted: 17:48 - 15 Sep 2009    Post subject: Reply with quote

it strarts at 7000rpm and doesn't stop till i change gear it starts when im in 2nd gear 1st is ok
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 182 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.05 Sec - Server Load: 0.68 - MySQL Queries: 13 - Page Size: 43.27 Kb