|
|
| Author |
Message |
| dansrockin |
This post is not being displayed .
|
 dansrockin Scooby Slapper
Joined: 22 Feb 2009 Karma :     
|
 Posted: 12:14 - 08 Nov 2009 Post subject: aarrrghh!!! what tool do i need? |
 |
|
why do things never go smooth when i try to do some work on a bike!
i changed my oil and filter on my zxr750 yesterday and it took me over 30 mins to get the filter off!
today i went to do the plugs, gapped them all to 0.75 as in the book, took the tank and airbox off, only to find out my socket doesnt fit down the hole!!! its a 16mm hex socket as it says in the manual but it is too wide to go down the hole! i went to halfords ( only place open today) and they dont do anything smaller!
so can anyone suggest where i can get an appropriate tool to get my plugs out?
and to top it all off as i was putting the tank back on, i smelt petrol, looked down and the fuel filter has a big crack in it right where the pipe goes in the top, it must have split it when i was moving the tap around!!!
so now i need a new fuel filter too!
not happy!!!
dan |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Itchy |
This post is not being displayed .
|
 Itchy Super Spammer

Joined: 07 Apr 2005 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| dansrockin |
This post is not being displayed .
|
 dansrockin Scooby Slapper
Joined: 22 Feb 2009 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| duhawkz |
This post is not being displayed .
|
 duhawkz World Chat Champion

Joined: 03 Dec 2006 Karma :  
|
 Posted: 13:00 - 08 Nov 2009 Post subject: |
 |
|
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Blue_SV650S |
This post is not being displayed .
|
 Blue_SV650S World Chat Champion

Joined: 27 Nov 2008 Karma :    
|
 Posted: 13:35 - 08 Nov 2009 Post subject: |
 |
|
Grrrrrrrrrrrrrrrrrr .... why do Kawasaki do this?!!?
I had exactly the same issue with my KLR250!!!
The ONLY thing that would fit in the recess (without modification) is the plug spanner that came with the bikes standard toolkit.
If you still have your bikes toolkit, I am guessing there should be a box spanner in there?!
After some googling, I found this was a common annoyance with the KLR. The 'fix' (once old one was out) was to get some plugs that are the same size/grade, but with a smaller hex, therefore you can get a 'proper' sparkplug socket in there.
I am getting good at crossmatching now, so what are the standard plugs for your bike?
I know this doesn't help with THIS chance, but it will make it a whole lot easier in future!!!  ____________________ The purpose of life is to fight maturity. |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| dansrockin |
This post is not being displayed .
|
 dansrockin Scooby Slapper
Joined: 22 Feb 2009 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| stinkwheel |
This post is not being displayed .
|
 stinkwheel Bovine Proctologist

Joined: 12 Jul 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| dansrockin |
This post is not being displayed .
|
 dansrockin Scooby Slapper
Joined: 22 Feb 2009 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| ZRX61 |
This post is not being displayed .
|
 ZRX61 Victor Meldrew
Joined: 05 Nov 2003 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| chris-red |
This post is not being displayed .
|
 chris-red Have you considered a TDM?

Joined: 21 Sep 2005 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| ZRX61 |
This post is not being displayed .
|
 ZRX61 Victor Meldrew
Joined: 05 Nov 2003 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| chris-red |
This post is not being displayed .
|
 chris-red Have you considered a TDM?

Joined: 21 Sep 2005 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| stinkwheel |
This post is not being displayed .
|
 stinkwheel Bovine Proctologist

Joined: 12 Jul 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| chris-red |
This post is not being displayed .
|
 chris-red Have you considered a TDM?

Joined: 21 Sep 2005 Karma :   
|
 Posted: 17:16 - 10 Nov 2009 Post subject: |
 |
|
Hahaha  ____________________ Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything. |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 16 years, 117 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|