Yamaha YBR 125 help

[Dark One]

My dad fixed my bike yesterday and it works fine now but afterwards handed me a screw and told me not sure where it went. So now I'm too concerned to ride it.
I know he took off the side plates, the seat and the fuel tank so likely but not limited to be from there.

Its a 2-3cm screw with a distinctive gold 'top hat' tube over it: about 1cm long covers the screw and a thin 'brim' the size of a washer that goes against the screw head there's a rubber washer on the that goes over the gold 'top hat' and about the same thickness of the 'brim'.

Below I've made a crude attempt to show what the screw looks like side on:

S=Screw, G=Gold piece, R=Rubber,

GR
SGRGGG
SGRGGGSSSSS
SGRGGG
GR

I've ordered a Haynes manual so I can check myself, but that won't arrive for several days so any help now is appreciated.

[cb1rocket]

take a photo thats easier to show

[neil.]

Is it parts 29,30 and 31 in the following pic by any chance?
____________________
CBT February 2008 | A2 June 2008 | Yamaha YBR125 (written off) | Honda CBF125 (current)

[neil.]

Or something from here?
____________________
CBT February 2008 | A2 June 2008 | Yamaha YBR125 (written off) | Honda CBF125 (current)

[Dark One]

Yes parts 29-31 where right, thank you very much. I didn't notice it as there was a screw in there that was in the wrong place, but it's all fine now so looking forward to riding it tomorrow.

[neil.]

Nice one, get hold of the Haynes manual and service/parts manuals for the bike and do your own repairs. Most stuff bar the engine is pretty easy on this bike, as I'm finding out!
____________________
CBT February 2008 | A2 June 2008 | Yamaha YBR125 (written off) | Honda CBF125 (current)