Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Bent forks..

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :
PostPosted: 12:57 - 31 May 2010    Post subject: Bent forks.. Reply with quote
Hey guys.

My "new" GS has 2 bent forks...was told they were straight but they werent...doesnt matter anyway, the frame is great!

basically im looking on the bay and there are 2 sets, one at 80+9.50 and one at 110+10p&p

Also googled swapping the front forks...as the GS is supposed to have crap front suspension.
Came across this - https://www.customfighters.com/forums/showthread.php?t=17555

does that mean a few of those 37mm forks will be fine for me? Due to the lack of GS forks on ebay im happy to buy other ones, btw im only really needing the stanchions, not the fork lowers.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Wafer_Thin_Ham
Super Spammer



Joined: 18 Nov 2005
Karma :
PostPosted: 13:32 - 31 May 2010    Post subject: Reply with quote
Could you not just buy replacement stanchions off someone like ABE?

You may well be able to use some of those from the list, but it depends on the length of the stanchion as well as the diameter. Wink
____________________
My Flickr
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 14:26 - 31 May 2010    Post subject: Reply with quote
Why not just straighten them/have the stanchions straightened? Would be cheaper than replacements. Buy some new seals and change the oil whilst you have them out.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

TUG
World Chat Champion



Joined: 12 May 2007
Karma :
PostPosted: 14:49 - 31 May 2010    Post subject: Reply with quote
If they're not kinked or creased have them straightend but they won't be perfectly true i've been told.
Its your bike, buy new and know its right or have them bent back.
____________________
Haz ER-5, innit!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 15:24 - 31 May 2010    Post subject: Reply with quote
TUG wrote:
If they're not kinked or creased have them straightend but they won't be perfectly true i've been told.
Its your bike, buy new and know its right or have them bent back.


Done properly they would be at least as good as new - if they aren't creased as you said. Remember, forks flex in normal operation, effectively giving you a 'bent' fork as soon as you load it.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :
PostPosted: 19:13 - 31 May 2010    Post subject: Reply with quote
id prefer to get a new set, had dodgy repair done on last forks...id rather get straight ones.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ms51ves3
Super Spammer



Joined: 08 Jun 2007
Karma :
PostPosted: 19:27 - 31 May 2010    Post subject: Reply with quote
If the only issue with your forks is the slight bend (i.e. they have good chrome), I'd get them straightened. It's about £20 per fork.
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :
PostPosted: 00:22 - 01 Jun 2010    Post subject: Reply with quote
ms51ves3 wrote:
If the only issue with your forks is the slight bend (i.e. they have good chrome), I'd get them straightened. It's about £20 per fork.


Got link to place as local shop screwed my others..

Its not MASSIVELY out, but it definitely bends, got a metal straight edge and there is mass gap in one side and the ruler wont touch top to bottom on the other side Sad
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 20:18 - 01 Jun 2010    Post subject: Reply with quote
Have you thought about giving Motoliner a ring?

https://www.motoliner.com/

£40 the pair for straigtening.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 144 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 1.47 - MySQL Queries: 13 - Page Size: 60.71 Kb