Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


DT 125 1983 lc liquid cool engine problems

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

oldmanstoner
Derestricted Danger



Joined: 25 Jul 2010
Karma :

PostPosted: 08:38 - 25 Jul 2010    Post subject: DT 125 1983 lc liquid cool engine problems Reply with quote

HI my dt was going fine until one day i rode it and when i was riding it started missing when i had the throttle fully open
then i noticed that there was oil coming out from the spark plug
My origonal thought was that the rings were shot but when i took off the head i saw they were fine but the head gasket was in three peices that means it had blown I also noticed that their was water in the crank is that from the head gasket been broken or is the water pump seal also poked i dont know too much about two stroke motors how does one do the timming on the motor when put back together as there is no timming chain or belt must the piston be TDC and thats all Shocked
____________________
JJJ
 Back to top
View user's profile Send private message You must be logged in to rate posts

27cows
World Chat Champion



Joined: 01 Nov 2009
Karma :

PostPosted: 09:19 - 25 Jul 2010    Post subject: Reply with quote

There's no timing to worry about - CDI. Just sounds like a case of a blown gasket. Clean everything up, replace the top end gaskets (and plug, to be on the safe side), and it should be fine, fingers crossed.
____________________
The RXS100: vehicle of choice for Chuck Norris
 Back to top
View user's profile Send private message You must be logged in to rate posts

oldmanstoner
Derestricted Danger



Joined: 25 Jul 2010
Karma :

PostPosted: 11:00 - 25 Jul 2010    Post subject: Reply with quote

27cows wrote:
There's no timing to worry about - CDI. Just sounds like a case of a blown gasket. Clean everything up, replace the top end gaskets (and plug, to be on the safe side), and it should be fine, fingers crossed.

thanks very much I think all will go well checked water pump seal all good so it must be the head gasket well at least it gave me a chance to strip the bike and i have started redoing the whole bike
right down to polishing all the nuts and bolts and respraying the frame
____________________
JJJ
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

oldmanstoner
Derestricted Danger



Joined: 25 Jul 2010
Karma :

PostPosted: 16:19 - 25 Jul 2010    Post subject: Reply with quote

Thanks very much will buy from yamaha they quite cheap
____________________
JJJ
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 15 years, 202 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.05 Sec - Server Load: 1.46 - MySQL Queries: 13 - Page Size: 43.63 Kb