Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Exhausts on a derbi senda? Sorry :P

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 18:31 - 05 Oct 2010    Post subject: Exhausts on a derbi senda? Sorry :P Reply with quote

Looks like its time to get a new exhaust. Okay, so I dont want to make a topic like:

'ere got me 50 innit and wanna make 30 horsepower and I have a mate whos duz 103 mph and I got a air filter'

No. Looking like the baffles have gone in my exhaust and there is no way to repack it as it is one bit of metal. Besides it is almost black anyway as the previous owner just didnt clean the exhaust.

I am after an exhaust that is around or if possibly below £150. Done my research and cant find many on the net. Wanted to get a Gianelli as apparently it gives you some midrange. As does the Leo Vince v6. Unfortunately, however, I have the left-hand side exhaust model so I cant find one. Am also interested if anyone knows where to get a metrakit?

Been eyeing up the technigas enox. Its cheap and does the job. I have had some bad words but basically I am after an exhaust that looks similar to the original. Isnt rediculously loud and that doesnt make my bike run like turd. My bike is supposed to run a 71 main jet, a 33 idle and a 30 slide valve. It actually has a 99 main, 34 (I think) idle and 40 slide valve. Not good. Dad wants to put it back to normal and when I said it is a deristricted exhaust he went on a rant about the usual legal shit. So stubborn wouldnt listen. So he said buy what you want and I will fit it. Gonna try and ask him for a hand again later.

So, anyone have any reviews on the tecnigas? And do you know where I can get a lhs exhaust either by gianelli, metrakit or leo vince?

Thankyou. I dont mean to be the typical 16 year old, just after a replacement exhaust.

Ps. Jets? Embarassed
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Welshd1k
World Chat Champion



Joined: 03 Oct 2006
Karma :

PostPosted: 18:35 - 05 Oct 2010    Post subject: Reply with quote

look
bargain!

https://cgi.ebay.co.uk/derbi-senda-exhaust-/140461548164?pt=UK_Motorcycle_Parts&hash=item20b4292284

arrow pipe for a lefty

contact
https://cgi.ebay.co.uk/Big-One-Replacement-Derbi-Senda-2000-2004-Exhaust-/170530585870?pt=UK_Motorcycle_Parts&hash=item27b46a3d0e

maby ?
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<
 Back to top
View user's profile Send private message You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 18:42 - 05 Oct 2010    Post subject: Reply with quote

Good idea! And I looked at that arrow, not too keen. if its got rust on it it must be a bit old and dont want the baffles going again while im on it :/
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 18:44 - 05 Oct 2010    Post subject: Reply with quote

Just looking at their site, it seems they only sell the 'Big One' exhausts. May be a bad idea. Its like asking Asda, where can I find Tesco's own brand deo please :L

Anyone know what these 'zorsts are like?

Thanks Mr. Green
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Welshd1k
World Chat Champion



Joined: 03 Oct 2006
Karma :

PostPosted: 18:46 - 05 Oct 2010    Post subject: Reply with quote

had a big one on a old mtx125 was decent exhaust. to be fair is it just the end pipe on your bike thats died?

i had one of these on my aprilia mx50
https://cgi.ebay.co.uk/Universal-rear-silencer-Pitbike-Moto-X-baffle-/190352986653?pt=UK_Motorcycle_Parts&hash=item2c51ec121d
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<
 Back to top
View user's profile Send private message You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 19:41 - 05 Oct 2010    Post subject: Reply with quote

Not 100% yet gonna have a look at the weekend. It isnt two different parts as in front pipe and rear pipe with silencer. Its one pipe then a silencer on the end, with 3 bolts in it.

https://www.adrenalin-pedstop.co.uk/p/BLACK-ANODISED-SILENCER-FOR-TE-2562.aspx

This sorta thing Smile
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Carvel
World Chat Champion



Joined: 01 Jun 2010
Karma :

PostPosted: 19:59 - 05 Oct 2010    Post subject: Reply with quote

Quote:
Looking like the baffles have gone in my exhaust


When you say the baffles gone, what do you mean. Baffles dont just 'go'.
____________________
2002 Aprilia RSV1000R, Cbr600Fs, Mk1 B12, Vfr400 NC30...

Matt B: I can deal with crushed nuts to beat Ollie.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 20:05 - 05 Oct 2010    Post subject: Reply with quote

Well, started falling apart. There are bits in my exhaust and they are rattling around :/ Any advice? Very Happy
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 20:11 - 05 Oct 2010    Post subject: Reply with quote

All I know is that the Gianelli sounds beast Razz

Thumbs Up
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 19:22 - 06 Oct 2010    Post subject: Reply with quote

Haha. Well, quite interested in that arrow exhaust. Its a week til it finishes yet. Would you get it, bearing in mind the condition? And will it definately fit my bike as its for an 02 model?

At the moment I am in the process of buying new jets and throttle slide. As I mentioned above I am trying to get back to the standard but what would you advise if I was to put this, or another sports exhaust, on my bike?

Thankyou guys! Very Happy
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 17:20 - 07 Oct 2010    Post subject: Reply with quote

Any ideas? :/
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 22:12 - 07 Oct 2010    Post subject: Reply with quote

Just noticed this. I think it may be worth paying just an extra £25-60 to get a new exhaust that isnt as rusty and isnt so conspicuous. The arrow has really obnoxious weld lines that yes, look better but are a bit obvious.

Here is the exhaust in question, fourth down: https://www.pjme.co.uk/acatalog/Derbi_Senda_50_Performance_Exhausts_.html

The deristriction images look a bit odd. Am I right in thinking that it is just a washer at the front. This image shows it to be at the front and at the back :S

Jets?

Thanks in advance Thumbs Up

Ps. My dad has asked me is there any gaskets for the exhaust? I cant seem to find any :/
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

herulach
World Chat Champion



Joined: 19 Apr 2010
Karma :

PostPosted: 22:19 - 07 Oct 2010    Post subject: Reply with quote

Much as I sound like a grumpy patronising git, it's a 50, you're only going to have it for a year. Get yourself a stock one from a breaker, and save the 70/80 quid to go towards a 125/training, hell spend it on women, you'll get more enjoyment out of it than making a 50 marginally faster.
____________________
YBR 125>FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 22:23 - 07 Oct 2010    Post subject: Reply with quote

Read the OP, Im not trying to make it faster; Im after a replacement. Just the Metrakit is obviously better than buying an OEM one which, at the mo, I cant find.
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

herulach
World Chat Champion



Joined: 19 Apr 2010
Karma :

PostPosted: 22:29 - 07 Oct 2010    Post subject: Reply with quote

Sendaman wrote:
Read the OP, Im not trying to make it faster; Im after a replacement. Just the Metrakit is obviously better than buying an OEM one which, at the mo, I cant find.


I know you're not, you'd be barking up the wrong tree anyway. I meant get a second hand one (there must be plenty of accident damaged ones floating around).
____________________
YBR 125>FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

Carvel
World Chat Champion



Joined: 01 Jun 2010
Karma :

PostPosted: 22:38 - 07 Oct 2010    Post subject: Reply with quote

Standard Derbi exhausts rust to fook in about 7 minutes. That metrakit exhaust will be fine, altough if its just the end can thats the problem why dont you just buy an endcan instead of a full system.
____________________
2002 Aprilia RSV1000R, Cbr600Fs, Mk1 B12, Vfr400 NC30...

Matt B: I can deal with crushed nuts to beat Ollie.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 14:56 - 08 Oct 2010    Post subject: Reply with quote

I cant seem to find any :/

So if I just buy an end can, will I have to upjet? If so what jets shall i run. If you say the same, the ones the guy who had the bike before me was running were all wrong. If I was to revert to standard, it would then be wrong, right? Laughing

Thanks for the help guys Mr. Green
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

asdf
Nitrous Nuisance



Joined: 06 Nov 2007
Karma :

PostPosted: 16:06 - 08 Oct 2010    Post subject: Reply with quote

I had an arrow on mine and a few mates had other brands (metrakit, gianelli ect) and i found the arrow one to be the best sounding. As far as power the metrakit seemed to gain the most.
____________________
KTM EXC 125 Supermoto, Honda Cub90

Past - Aprilia SR 50 Ditech, Derbi Senda SM DRD, Aprilia RS125 x 2, Aprilia RX 125
 Back to top
View user's profile Send private message You must be logged in to rate posts

HD
World Chat Champion



Joined: 16 Dec 2009
Karma :

PostPosted: 18:03 - 08 Oct 2010    Post subject: Reply with quote

Hmm just waiting for a reply from them to see if it is a lefty as you really cant tell in the photo.

The guy with the arrow has no feedback and he reckons he is selling it cos he sold his bike a while back and doesnt know what jets he used as it came with the bike.

Been thinking about a 'Big One' again as they are £30 cheaper than the Metrakit.

Did anyone have a look at that photo of the derestriction? :S

And please, please, please: jets help Sad
____________________
Rusty '02 Vito Camper + CBR600F3
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 15 years, 308 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 2.25 - MySQL Queries: 13 - Page Size: 101.67 Kb