Lazy biker

[atop]

Hi, guys,its true l'm a lazy biker, having a honda 125 been sat up since last September.l got puncture & never got if fixed as l had done 1 just before that & was really pissed to get another so soon
I cant get it to start now ,l drained the petrol & put in fresh but no joy, Anyone know what may help ?

[Gary SuperSprint]

Charge battery, clean plug and try using easy start spray.
____________________
honda cub 90 (stolen), Honda nsr 125 2001 (stolen), present : fully restored honda ns 125 f 1989. Current project, susuki rf600.

[rob c]

and stop being lazy.
____________________
FCUM

[BigGeeking]

clean the carb could be full of varnish from the petrol sitting in it for so long the holes in the idle jet are very small and dont take a lot to block

[atop]

Thanks for the really helpful advice ,l have looked at youtube & saw some carbs been cleaned, so took mine apart and the wall were indeed covered in yellow ;however of the 2 pilot holed piston jets all the holes are really clean ,except the idle 1 l think it is; l cant get a narrow bit of wire through it.
The ones on youtube were see through;l'm wondering if its meant to be that way or should l drill it ;Any thoughts ?

[.....]

Don't stick wire down it and definitely don't drill it.

Have you tried carb cleaner or blowing it through with compressed air?

[joshdudeha]

[Old Git Racing]

Leave it in some coca coala overnight, best carb cleaner there is.

OGR
____________________
2022 Tiger Sport 660 2019 Street Twin 2003 K3 gixxer 1000 1998 Srad 600 track hack

[atop]

The thinnest wire ,l could get through it is wire brush (single strand) ,which is very thin and sturdy & dosnt bend for the most part .
I got it most of the way in but ,its definetly blocked around the top bit has it feels rubbery & theres no way l can see that they make rubber parts that small .l'll put it in vinegar overnight,as l dont have coke & see how it goes