Datatool system 3 alarm problems

[Airborne1987]

Hi ive got a data tool system 3 alarm on my GSXR 600 k3 and i want the thing off!!!
It has started going off constanly and i can not turn it off with out disconecting the main battery.
Does anyone please know how to take this pain in the ass off my bike so i can actually go riding before the sun disapears for the yr.

[ThoughtContro...]

You'll have to trace each wire out from the alarm box and see where it splices into the wiring loom, cut it out neatly, then rejoin any wiring it cut into. The original bike wiring will be colour coded, which should aid restoring the original connections. A wiring diagram for the bike should be of some assistance.
____________________
Prize cunt
--
"In a world of universal deceit telling the truth is a revolutionary act" - George Orwell

[WannaBeDude]

At the risk of thousands of happy customers, all i ever hear about datatool, is their a pain in the ass.
____________________
Jogging on, destination living.

[craigT19]

is it hard wires or connected via a 4 pin block connector and a 2 pin block connector.

If its hard wired i can talk you though bypassing it without removing the wiring, you can connect 2 sets of 2 wires together and cut out the alarm unit leaving the wiring behind..

its your call
____________________
Bikes owned :- 2001 nsr125, 1999 zx6r, 2006 yzf-r1, 2009 xmax 250, 2012 yzf-r1, 2015 MT-07
Current bike : - 2016 MT-10
BCF member pops. sadly missed 1945-2003

[craigT19]

[WannaBeDude]

I have a flashing led light 3 quid, always on, like my fuel tap
____________________
Jogging on, destination living.

[Quornholio]

[Oldie]

It could be the pressure switch under the seat making continuous contact. Check it out.