tail light/wiring harness dr350

[arditoc92]

So I bought a 1990 dr350 and it was in rough shape... the only thing I'm stuck on is the tail light. The person I got it from didn't give me one and the wiring harness was duck taped to the frame. Iv looked everywhere for a " plug and play" OEM light and can't find one. I'm trying to make street legal and thats the only thing stopping me. Please help!!!

And also its kick start only.

[robocog]

What do you need to know?
wire colours?

I have a 1990 DR250 (with working electrics) so I may be able to help
I also have a Clymer manual for it here

Regards
Rob
____________________
Needs a bigger garage...

[arditoc92]

The wire colors, possibly what the connector looks like?? If you could post pictures that would be a huge help!!

And not to sure if I can just use a regular tail light from a auto store? Or maybe know where to get parts for it?

[robocog]

IIRC mine is on bullets
not sure if mine is still on the OEM light or if it has got chaged at some point

Looks similar to this one...
https://www.ebay.co.uk/itm/SUZUKI-DR350-DRZ400-DR-BIG-RMX-REAR-LIGHT-GPM-CLASSICS-/120818662756?pt=UK_Motorcycle_Parts&hash=item1c215a7d64

Though I think my lens got modified to have a clear (ish) section to try and show willing/emulate a bulb lighiting up the no plate (light switch also got butchered so lights are always on)

It passes MOT like this and not been pulled for "showing white light" yet

Will get out there and take some piccies and show the unit/wiring and connectors later

Regards
Rob
____________________
Needs a bigger garage...

[robocog]

OK so mine is on a 3 pin connector
(its the indicators that are on bullets on my bike)

Bike loom side ...
Black with white stripe (ground/earth -)
Grey (lights +)
White with black stripe (brake light +)

Lamp fitting side of connector ...
the grey becomes a brown wire (not that insulation colour matters)


Hope that helps

Regards
Rob
____________________
Needs a bigger garage...