Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Chinese motorcycles, give me your view

Reply to topic
Bike Chat Forums Index -> General Bike Chat Goto page 1, 2, 3, 4, 5  Next
View previous topic : View next topic  
Author Message
englishmaninc... This post is not being displayed because it has a low rating (Spam). Unhide this post / all posts.

ClockworkJesu...
Nitrous Nuisance



Joined: 31 Jan 2011
Karma :

PostPosted: 07:18 - 23 Feb 2012    Post subject: Reply with quote

I've got a '10 plate Sukida SK125-5 patriot.

For a 125 it sounds great; the fuel economy is wonderful and it's so far the most reliable motorcycle I've owned. Parts are easily sourced because most, if not all Chinese bikes share the same components, so I can pick and choose on parts and price.

it has its niggles (like a slightly sluggish speedo) but for a 125 its fine; Not like you're about to out-accelerate anything anyway...

I've heard the horror-stories, but I think a lot of that is people failing to maintain a cheap bike, because they are so cheap;
18 miles of A380 has never been a problem.

:3
 Back to top
View user's profile Send private message You must be logged in to rate posts

MaybeGuy
Super Spammer



Joined: 12 Mar 2007
Karma :

PostPosted: 07:24 - 23 Feb 2012    Post subject: Reply with quote

That's a spam from me. Compared to jap or european bikes, chinese bikes are a massive piece of fucking useless dangerous shit. People who say otherwise have not used the bike for anything other than a trip to town on a sunday to buy some wire brushes to clean off the rust. I would boycott them all given the opportunity.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!! Mr. Green
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith
 Back to top
View user's profile Send private message You must be logged in to rate posts

Polarbear
Super Spammer



Joined: 24 Feb 2007
Karma :

PostPosted: 08:01 - 23 Feb 2012    Post subject: Reply with quote

The trouble with this, from my point of view, is that it's hardly going to be an unbiased article.

Yes, you will get some success stories from people who post on here, but they are far in the minority compared to people with terrible tales to tell about chinese motorcycles.

I for one would never recommend them to new or young riders who don't know about maintenance because without constant attention I would not trust them.

My worry would be that if you have nothing but good reports in an article some people, especially new riders after a cheap bike, will think they are OK.

I don't know your magazine and can't be bothered to look it up, but if you are a mouth piece for the industry or sell chinese bikes, then you indeed are spamming. If you are an independent then I feel you should publish articles showing both sides of the argument and the ratios of good/bad you get or you aren't being unbiased.
____________________
Victory Cross Country American tractor.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 08:18 - 23 Feb 2012    Post subject: Reply with quote

I might have very cautiously recommended the Lexmoto Vixen (aka Huoniao HN125-8 / Haotian HT125-8) but it appears anecdotally that the more recent bikes have got worse since I got mine, which kind of sinks your premise.

Lifan make their exhausts out of pre-rusted tinfoil, you can quote me on that.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 09:36 - 23 Feb 2012    Post subject: Reply with quote

You have no chance.

I've owned a Chinese motorcycle, as have many people on here, and they're reputed as being awful because at least 98% of them are.

If you have the ear of the manufacturers, tell them this: stop churning out shit. I get that you don't 'get' the idea of intellectual property, or treating factory workers like humans; whatever - it's not my human rights record that's at stake. however, the quality of your product is appalling.

Also, on a side note: your website is pony. It's not a 'Professional English Language Motorcycle Portal Website', it's a Chingrish mess.

Finally:
https://www.chinamotorworld.com/upfiles/product/20115191445042379.jpg
lolwut? Laughing
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

pinkyfloyd
Super Spammer



Joined: 20 Jul 2010
Karma :

PostPosted: 09:44 - 23 Feb 2012    Post subject: Reply with quote

Rogerborg wrote:


Lifan make their exhausts out of pre-rusted tinfoil, you can quote me on that.


Agreed and their exhaust studs are made out of chocolate. They break constantly.
____________________
illuminateTHEmind wrote: I am just more evolved than most of you guys... this allows me to pick of things quickly which would have normally taken the common man years to master
Hockeystorm65:.well there are childish arguments...there are very childish arguments.....there are really stupid childish arguments and now there are......Pinkfloyd arguments!
Teflon-Mike:I think I agree with just about all Pinky has said.
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

daemonoid
World Chat Champion



Joined: 27 Jun 2008
Karma :

PostPosted: 10:02 - 23 Feb 2012    Post subject: Reply with quote

There's just been a fairly supportive thread on Chinese scooters:

https://www.bikechatforums.com/viewtopic.php?t=239563

Despite the negatives in this thread I really see China taking over in the not too distant future, cars especially, but bikes too.
____________________
current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

robbieguy2003
World Chat Champion



Joined: 30 Mar 2007
Karma :

PostPosted: 10:11 - 23 Feb 2012    Post subject: Reply with quote

The sad thing is, the opinions above are exactly what people think when someone has owned a chinese motorcycle.

My other half got a Chinese Cruiser before I met her, the engine bolts rattled themselves out, it's impossible to align the sprockets and it's quite rusty although it's largely been kept in a garage or at worst, it was in a sheltered gazeebo.

The problem I see currently, is that a few engwishmen who are less than reputable have been bringing anything in that they can sell and tax and pass onto someone with low cost being the only objective.

I've heard things like 'who cares if it falls apart after a year because little jonny will have bashed it up so the resale of something good will be terrible'. While that will be the case for some, I feel desperately sorry for the kid who gets one, looks after it and it still falls apart. If that kid sticks with bikes, that kid will turn into an adult, get a job and have money to spend on bikes and guess where he wont buy bikes from?

If the Chinese are to consider themselves as a threat to any other region, then they need to move the bar between cost and quality more towards quality, if they're still really cheap, or cheaper than the competition then great, but at least you'll be putting a good product out the door. At the moment the products that are being put out the door say the guys running the company cant see further than the end of their glasses and couldn't give a shit if the company exists in a year or two, thats not the sort of company anyone with sense wants to buy a motorcycle, or car from.

Build them properly, even look at racing events (outside of china) and put your products on the global stage, learn from it, refine it, build your own IP and make a decent product, you'll then be able to be taken seriously. All this is expensive but the motorcycle industry is a multi-billion £/$ industry, you need to put up or shut up if you want to have a place in it.

Alternatively keep knocking out cheap shit that no one in the west will buy, then try and punt it to India, a country who knows their motorcycles and wont buy something that wont last - look at Honda/Hero/Suzuki/Bajaj etc in India. They're not the best performing, but all the tricks Honda and co have learned in manufacture of other models have passed to these models, that's lowered the production cost, lowered the return rate of parts/bikes and offered a better product to the market.

I'd suggest taking a look at the actual business model operated by the big Japanese factories and trying to emulate that rather than just producing a fairly shit version of their product.
____________________
Current Bikes: Honda CBR 600RR - '07, Suzuki GSX1250 FA ST '11
Old Bikes: Suzuki Intruder 125 LC - '2001, Honda CBR 600F - '92, Honda CBR 600RR - '03
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

plugger147
World Chat Champion



Joined: 13 Mar 2005
Karma :

PostPosted: 10:19 - 23 Feb 2012    Post subject: Reply with quote

I successfully managed to remove 2 of the 6 fasteners from the front mud guard on a jinlun scooter, the other 4 sheared the heads off though so it'll sit an wait til I can be arsed to sort it out...
____________________
Tristan the wrote: just whipped off my trousers to find a big bruise on my arse, caused by matt rear ending me...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 10:25 - 23 Feb 2012    Post subject: Reply with quote

Bring on the 400cc triple cafe racer thing, If it can be made with some sense of quality and parts support then I would like to try one as the idea of a diddy triple is quite appealing and it looks pretty tasty.

https://2.bp.blogspot.com/_E15jc7J5CoU/SuM8jEx0zUI/AAAAAAAAJdo/7ZcjFBK_Asc/s400/4.jpg


EDIT: to answer the OP - how about you randomly sample 100 chinese bike owners and get honest opinions after taking it for the first MOT or when it dies (whichever is sooner). Might make for a more interesting read than some biased crap where you have picked out a few good stories from the hoards of bad ones.


Last edited by DrDonnyBrago on 10:35 - 23 Feb 2012; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

monty's double
Borekit Bruiser



Joined: 25 Feb 2008
Karma :

PostPosted: 10:25 - 23 Feb 2012    Post subject: Reply with quote

hmm - looks like they are trying to work up the food chain with this

https://www.ashonbikes.com/content/keeway-rk600

it would be a brave person who buys one though...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 10:48 - 23 Feb 2012    Post subject: Reply with quote

monty's double wrote:
hmm - looks like they are trying to work up the food chain with this

https://www.ashonbikes.com/content/keeway-rk600

it would be a brave person who buys one though...


I'd chance one, just for teh lulz. Depends on the price, though, and how readily I could get parts. I4s are much, much harder to bodge properly than a 125 single.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

jjdugen
World Chat Champion



Joined: 03 Jun 2011
Karma :

PostPosted: 10:56 - 23 Feb 2012    Post subject: Reply with quote

The 'Keeway' is actually a Benelli design and will be sold as such when (if) it comes to Europe More to the point, it sells for £4,500 in China. Not going to set your pants on fire with a claimed 80 BHP, but..........
Back to the original theme. Yes, build quality is poor if all the other posts on this topic are to be believed. But, I have not found evidence of this on the couple of Chinese I have actually worked on. I will HAVE to reserve my judgement as there is no smoke without fire but on MY evidence, the Chinese seem to produce a product that works at a very low price.
Could it be that we look at this the wrong way round. What is 'better' in the current economic condition. Something cheap to learn on, spares that are cheap (a better support service would be nice) and modifications that a young impoverished lad can undertake as and when money allows. Or fiendishly expensive mainstream maufacturers offerings? A few more steps up the quality/support rungs and I will surprised if attitudes dont change in the same way as they did in the sixties... Jap crap anyone?
____________________
The CBR900RR has been sold. Aprilia Falco worms its way into my heart.
Try Soi 23 on Amazon for a good read.... Self promotion? Moi?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

daemonoid
World Chat Champion



Joined: 27 Jun 2008
Karma :

PostPosted: 11:09 - 23 Feb 2012    Post subject: Reply with quote

I think one of the problems is that they're built for the local market with local market ideas. I've never been to China, but from all the stories I've heard from colleagues the society is very similar to India.

In India, the locals do not work on their own bikes - labour and parts are very cheap so if anything goes wrong you drop it off at the roadside mechanic and less than £3 later it's fixed... I got an oil change, chain tightening and puncture repair done for £5 and was told I was ripped off. That, along with the climate and the lack of need for MOT mean the domestic market could happily survive with a cheaper product and getting something well built wasn't worth it.

But like I say above, they are learning and both India and China own European manufacturers now. With the input from the western engineers and the incredibly cheap labour market the prices are going to stay low(er) but the quality will increase. It's not that long ago no-one bought Japanese bikes/cars because of the poor quality and styling, now they're regarded as some of the best at both!
____________________
current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 11:41 - 23 Feb 2012    Post subject: Reply with quote

daemonoid wrote:
But like I say above, they are learning and both India and China own European manufacturers now. With the input from the western engineers and the incredibly cheap labour market the prices are going to stay low(er) but the quality will increase. It's not that long ago no-one bought Japanese bikes/cars because of the poor quality and styling, now they're regarded as some of the best at both!


To repeat an old argument: the Japanese actually innovate, while the Chinese just imitate.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

daemonoid
World Chat Champion



Joined: 27 Jun 2008
Karma :

PostPosted: 11:54 - 23 Feb 2012    Post subject: Reply with quote

nowhere.elysium wrote:
To repeat an old argument: the Japanese actually innovate, while the Chinese just imitate.


Go back a few years and lots of people said: the Americans/Europeans actually innovate, while the Japanese just imitate.

It's a crap argument - China, Korea and India are in the last stages of playing catchup (China is a little behind but moving faster). Like I said they own European manufacturers now, they'll tap the talent there then use there far greater workforce (including their young engineers which we have almost none of now) to take a massive slice of the market.

This is the reason China will win:
https://www.nytimes.com/2012/01/22/business/apple-america-and-a-squeezed-middle-class.html?_r=3&seid=auto&smid=tw-nytimestech&pagewanted=all

Quote:
Factories in Asia “can scale up and down faster” and “Asian supply chains have surpassed what’s in the U.S.” The result is that “we can’t compete at this point,” the executive said.


Quote:
When an Apple team visited, the Chinese plant’s owners were already constructing a new wing. “This is in case you give us the contract,” the manager said, according to a former Apple executive. The Chinese government had agreed to underwrite costs for numerous industries, and those subsidies had trickled down to the glass-cutting factory. It had a warehouse filled with glass samples available to Apple, free of charge. The owners made engineers available at almost no cost. They had built on-site dormitories so employees would be available 24 hours a day.


And finally, and probably the most important bit:

Quote:
Another critical advantage for Apple was that China provided engineers at a scale the United States could not match. Apple’s executives had estimated that about 8,700 industrial engineers were needed to oversee and guide the 200,000 assembly-line workers eventually involved in manufacturing iPhones. The company’s analysts had forecast it would take as long as nine months to find that many qualified engineers in the United States.

In China, it took 15 days.

Companies like Apple “say the challenge in setting up U.S. plants is finding a technical work force,” said Martin Schmidt, associate provost at the Massachusetts Institute of Technology. In particular, companies say they need engineers with more than high school, but not necessarily a bachelor’s degree. Americans at that skill level are hard to find, executives contend. “They’re good jobs, but the country doesn’t have enough to feed the demand,” Mr. Schmidt said.

____________________
current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 12:01 - 23 Feb 2012    Post subject: Reply with quote

At the risk of being quoted out of context, I believe that 95% (by mass) of a new Chinese-branded bike will likely be fine.

The issue is which bits out of the other 5% are going to rot or pop, and what the cost and hassle factor will be to fix them. Poor stock rubber, joke spark plugs, even a reg/rec or coil, not that big a deal, you can usually get specific or generic replacements. But I've got a basically decent 3 year old Lifan with a ruddy great corrosion hole in a badly made section of the downpipe, and no cheap way to replace it.

So it'll be a bodge-and-flog job, and everybody who owns it from now on will be cursing Lifan's name when they spot the issue.

That Keeway looks OK, but again it'll come down to warranty and parts support. The first purchasers are going to take a bath on it.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 12:14 - 23 Feb 2012    Post subject: Reply with quote

daemonoid wrote:
It's a crap argument - China, Korea and India are in the last stages of playing catchup (China is a little behind but moving faster).



South Korea is a stable design economy that's well-established anyway, so it can be discounted from this. While I don't deny that China has got a great many technically capable people, they don't have any respect for the concept of intellectual Property, copyrighting, or attribution of design. The difference between them and the Japanese circa 1960ish was that Japan looked at other designs, and took the good bits from them, and re-engineered them meticulously. China may well get the hang of that, but they're not reputed for doing so at the moment, and with good reason.

There are also other considerations; specifically, that when Japan was making its first steps into automotive production, it had recently been aggressively crippled, and had to rebuild everything from the ground up. China still has this capability, but it's mired in the current industrial buildup, along with the relative laxity of its working practices. I reckon that China will make it, and the rise of new machines that they're designing themselves will be what does it for them, not the torrent of cheap 125s and 200s that we're seeing today; while those will generate the capital, it's the new designs that will make them stand out.

Personally, I think the whole patenting system is pretty much dead in the water, but it doesn't excuse the way that Chinese manufacturers will flagrantly steal designs, and then try to pass them off as either their own, or, even worse, as the product of the original company, thus potentially ruining their reputation.

Until China (as a whole) implements better quality control, they'll still be regarded as the cheap and cheerful manufacturers; this doesn't necessarily mean bad, just budget. I don't know if you've seen an Indian-built bike recently, but they're pretty damn shonky. Same as with Chinese bikes; there are good ones, and there are bad ones.

It could just be that innovative Chinese tech doesn't tend to reach UK shores; most of what I see is knockoff design work, with less polish, as a rule.

Anyway; to curtail my rant, I will say this: regardless of whether you think it's a specious argument regarding design, you have to acknowledge that quality control is still a massive concern.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 12:19 - 23 Feb 2012    Post subject: Reply with quote

As has already been said on this thread , if the Chinese want us to buy thier bikes, they need the following.
1. a decent quality product.
2. a keen price.
3. a proper dealership net work.
4 customer/product support ie getting parts and warranties.

Then I might? have a look at a Chinese bike? maybe?

That said things do appear to be getting better for the Chinese bike owner (no not a Chinaman that owns a bike) as a few websites are popping up that are now selling spares.
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

daemonoid
World Chat Champion



Joined: 27 Jun 2008
Karma :

PostPosted: 12:34 - 23 Feb 2012    Post subject: Reply with quote

nowhere.elysium wrote:
I reckon that China will make it, and the rise of new machines that they're designing themselves will be what does it for them, not the torrent of cheap 125s and 200s that we're seeing today; while those will generate the capital, it's the new designs that will make them stand out.


Spot on, that's been my argument all along. They're emerging and with the European take overs they're only gonna do it quicker!

However your comments on China's economy are mistaken, they nearly own America now, they are the economic powerhouse in the world now and that fact is only going to become more obvious in the coming years.

nowhere.elysium wrote:
Anyway; to curtail my rant, I will say this: regardless of whether you think it's a specious argument regarding design, you have to acknowledge that quality control is still a massive concern.


I agree, the QA is lacking, but that will change pretty damn quickly - like I said they're still building for local markets and local markets have cheap labour & parts.

As for Indian bikes - I've owned one, a bajaj pulsar 180 (S/H a few years old), taken it through Monsoon season and managed a good few thousand kms on it. The quality was fine, only issue I had was with small hole in the slip on, paid an 'extra' Rs.200 to get it's pollution cert even with the problem Wink It had a much harder life than most UK bikes due to the weather and dodgy roads but held up well. Also rented a Royal Enfield while I was in Goa for a week, again spot on despite having a hard life as a rental bike near the sea. And just incase you didn't know Royal Enfield has been an Indian bike for many years...
____________________
current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 14:16 - 23 Feb 2012    Post subject: Reply with quote

pepperami wrote:
That said things do appear to be getting better for the Chinese bike owner (no not a Chinaman that owns a bike) as a few websites are popping up that are now selling spares.


Spares aren't a problem for most of the 125s, www.cmpo.co.uk (aka LLExeter aka Lexmoto) have loads and know their business, and droppy-seconds can be had for the popular models on eBay.

God help you if you go just a little off-piste though, it's calipers-and-prayer time.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 16:41 - 23 Feb 2012    Post subject: Reply with quote

Rogerborg wrote:

God help you if you go just a little off-piste though, it's calipers-and-prayer time.


When I was looking for a 250, I did just very briefly consider a Chinese 250? Shocked . as they seemed to have a favourable price.
However when I looked into getting spares for the said bikes, the support/ availibility was non existant.
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Sako
World Chat Champion



Joined: 19 Feb 2012
Karma :

PostPosted: 18:27 - 23 Feb 2012    Post subject: Reply with quote

i have never encountered anyone that has had a good thing to say about their experience of owning a chinese bike - think that speaks volumes of the general concensus.
 Back to top
View user's profile Send private message You must be logged in to rate posts

spetom
Trackday Trickster



Joined: 30 Aug 2010
Karma :

PostPosted: 21:13 - 23 Feb 2012    Post subject: Reply with quote

Quote:
i have never encountered anyone that has had a good thing to say about their experience of owning a chinese bike - think that speaks volumes of the general concensus.


In my experience most people who give chat about Chinese bikes have never actually owned one and gone by concensus, and in my experience concensus is nearly always wrong.

A bit like Brit bikes in the 60-70s the concensus was that they were crap, and while its true they had build quality issues and ageing designs, the truth for those who know is a BSA rocket 3/Triumph Trident would kill any CB750 in any area and didn't need to lie about bhp figures like the Japanese did, but still the general public and concensus just didn't accept this, doesn't mean it wasn't true though.

Same with the Chinese, granted there are some terrible Chinese bikes mostly due to the manner in which the bikes have been put together and not the design, but there are some very solid producers as well and I've had some pleasant surprises with Chinese bikes despite everyone screaming down my throat.

Wuyang for example which is half owned by Honda and produces a number of stuff for Honda, also Better BT125-5 which was a great bike.

In the end all the Jap stuff is made in China and I could hardly say the quality of my Jap 125s was that much better than my good chinese bikes.

Whatever you do stay away from Chituma or "Shituma" a total death bucket.

You just need to be careful when buying Chinese bikes and read experiences from people who actually owned the model you are looking at. and not the general concensus, like any bike, no?

It's like going on this forum and asking about Harley Davidsons, I'm sure you won't get a positive "concensus".
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 270 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Goto page 1, 2, 3, 4, 5  Next
Page 1 of 5

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.10 Sec - Server Load: 0.35 - MySQL Queries: 13 - Page Size: 151.5 Kb