Blata B1 mini bike - a bit of fun!

[m1tch]

Hi all

I am going to sell one of my mini bikes, the bike in question has just had a full top end rebuild done on it and annoying has more compression than my modded mini bike I also have! I just need to sort out the idle screw on the carb as I have just cleaned out the OEM carb and need to just set it.

Please note that this is a Blata B1 rep - its a 37cc watercooled 2 stroke @ around 8bhp, it is NOT cheap 49cc air cooled bikes produce around 2.5bhp.

Parts for this bike are very easy to come by (a piston, ring, pin and bearing is £11). There is also a 'big bore' kit available to bring it up to 49cc increasing the power to around 11bhp - crazy power for such a small bike!

Parts can be found here:

Mini Moto B1 Replica (Liquid Cooled) Parts - Mini / Midi Moto Parts - Spare Parts

and

Blata Origami B1 Spares & Performance Parts

I am looking for £150 collected, the bike itself is basically standard, I have done gasket matching, the head has been modded to have slightly larger waterways (good for cooling!), I have also chamfered the edge of the ports to reduce ring wear and polished the exhaust runner. I also believe it is fitted with heavier springs so it engages later in the RPM band giving better acceleration.

THIS IS AN OFF ROAD ONLY BIKE

https://i93.photobucket.com/albums/l49/m1tch_2006/CIMG0840.jpg
https://i93.photobucket.com/albums/l49/m1tch_2006/CIMG0842.jpg
https://i93.photobucket.com/albums/l49/m1tch_2006/CIMG0841.jpg