aftermarket cdi unit

[Dam_buster]

i was wondering if anybody could help me find somewhere to purchase a aftermarket performance cdi unit, which tops out around 10,000rpm.

i have no idea where 2 look for one, and was hoping someone can help me,

any help will be greatly appreciated,

thanks again..

jim

[c058y]

I got one off ebay for my NSR. The model I have is restricted in the CDI unit so I put one in from an earlier model! Worked a treat.

[Dam_buster]

kool , i only have a scoot but i no they are available i ran into a guy who had nearly the same set up on the same year ped as mine but his was so much faster, he told me he had a derestricted Cdi, so i want one lol but seeing as i cant find one i'm getting annoyed lol

i have a suzuki katana ay50 lc 1998 ,

the only cdi i can find is for the suzuki ap50 but i don't know if that will fit, and or blow my engine up.

thanks

jim

[Dam_buster]

does anybody know where i can get one from,

also i have been reading up on the ajustable rev limiters with the switch and was wondering if that would work in the same way? so i could limit my engine to say? 10,000 rpm..

any ideas on how 2 either bypass the cdi or derestrict would be great

thanks again

jim

[Kickstart]

Hi

Think the AP50 was some old sports moped so I doubt the CDI would work. You cannot "bypass" a cdi as it is required for the engine to run (well, unless you have some old points setup).

You are probably best trying a few scooter tuning shops (Taffspeed?) as they can probably advise you.

Not a clue what would be safe revs for your engine, but remember that you need to have the exhaust, porting, carb, igntion, automatic clutch, etc, all complementing each other, and you will not gain much (and may well loose out) if you just change one of these.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing