Rearsets - 75mm between mounting holes - where

[rockers]

hello all, im looking for some aftermarket rearsets for my zx7r and well there is nothing about, so im trying to find some from another bike that will fit.

The distance between the center of the mounting holes is 75mm - does anyone know of a bike with the same pattern ?

the distance between the mounting holes is the most vital bit the rest can be modified.

Anyone got any ideas ? or can you all get your tape measures out and check your bikes

Cheers

[MaybeGuy]

https://img12.imageshack.us/img12/3176/07042009331.jpg

Make some of these.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[Vincent]

[rockers]

hmm, i offered up a mates rearsets that are wrong hole size i think i just need rearsets with the correct hole distance as the rest is fine,

Im not keen on a adaptoptor plate as have a clean black frame and want some clean anodisedblack rearsets and want a plate inbetweenaswell

Cheers

[Vincent]

Understood. That was just a way of picking some up easier/cheaper, you could get the adapter plates anodised black for about a fiver if you want to keep it all uniform. I can't believe how expensive some of these rearsets are now, they were never very cheap but I've seen some now that cost nearly as much as my bike's worth
____________________
Space Is Deep