name the object in this pic please

[Flemy]

Hopefully if I get the name of it/what it does I can find it on eBay, so hopefully my phone will let me upload a pic.

This as I mentioned in an earlier thread is on my gsxr 600 srad, x reg.

It was connected to a black box with 4 red vent things with a big airfilter in and fed off to two smaller tubes that both went to two small cylinder things that look like the old picture camera film holder things, or like one of those big circular batteries.

Help please guys!
Regards
Flemy
____________________
Prev- Pug speedfight 2 50cc x3 (Write off, blown engine and stolen), Honda Xr 125-L (Nail), Suzuki GSX-R 600(stolen). Current- Kwak ninja 300

[EXC-Rider]

looks like a rubber tube
____________________
owned bikes: DR50, Thumpsta 110 , Honda CR85, Speedfight 100, Yamaha XT125X, Honda CRF450, Honda Hornet '07
current bikes: KTM EXC525 AKA the wheelie machine
A friend in need is a friend indeed but a friend with weed is better!

[Flemy]

[Pol Anorl]

looks like hevea brasiliensis which is an elastic hydrocarbon polymer
____________________
GOOD GAME BODYGUARD: https://i.imgur.com/8WePGgf.jpg
20:30:37 Pyro.: I don't sort of like men, I take every advantage to choke on dick.
Jewlio Iglesias: You live in Liverpool - Chances are, the front door has already been kicked off the hinges

[Aff]

Have you got a photo thats a bit further out?
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project

[Flemy]

[DrDonnyBrago]

Looks like a breather hose

https://www.ronayers.com/Fiche/TypeID/26/Type/AIR_CLEANER/MakeID/2/Make/Suzuki/YearID/40/Year/1999/ModelID/6153/Model/GSX-R600/GroupID/248678/Group/AIR_CLEANER

Am I correct in thinking it is part 13 on the above picture?

P number: 13855-34E50 - called a "TUBE CONTROL AI"

Go to a Suzuki dealership and buy a new one.

[Aff]

[DrDonnyBrago]

Part 8 appears to be the breather, I have no idea what part 13 does but it looks very much like the hose in the picture.

Can't you just lop an inch off the pipe and refit it or does it get pulled too tight?

[Flemy]

Even better pic?
____________________
Prev- Pug speedfight 2 50cc x3 (Write off, blown engine and stolen), Honda Xr 125-L (Nail), Suzuki GSX-R 600(stolen). Current- Kwak ninja 300

[Aff]

[Flemy]

[Aff]

[Flemy]

Legend mate!!

Everyone who commented will get karma when I get to a laptop tomorrow thanks a million guys!
____________________
Prev- Pug speedfight 2 50cc x3 (Write off, blown engine and stolen), Honda Xr 125-L (Nail), Suzuki GSX-R 600(stolen). Current- Kwak ninja 300

[Flemy]

[Aff]

27 euros including postage!

Doesn't seem to be anything on ebay either. Probably better off looking for a breaker.
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project

[Flemy]

[ThoughtContro...]

Could you not do a decent bodge using some tubing of the same diameter, some internal metal pipe that fits snugly inside and two circlips or cable ties around each join? Seeing as it's only tubing. Just cut the original back to where it's good beforehand. A bit ghetto for Gixxer junkies, but 27 Euros sounds insane.
____________________
Prize cunt
--
"In a world of universal deceit telling the truth is a revolutionary act" - George Orwell

[StormCrow]

Erm... Gaffa tape anyone?

Would at least rule it out as the cause of the lack of start or whatever (haven't really read the thread fully)

[boundy]