|
|
| Author |
Message |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
 Posted: 15:19 - 12 Dec 2012 Post subject: My new tiddler. |
 |
|
Picked this up from neil ten days ago. It needed a little work, but after a caliper rebuild, a new rear tyre, oil change, valve check and general once over, it passed the MOT monday with no advisories.
I've fitted some handlebar risers, MX brush guards, heated grips and bar muffs. The risers mean I can stand up straight on the pegs without an arched back = green lane fun times.
I'll probably get a spare set of wheels so I can fit knobblies, and fit a scottoiler and high rise front mudguard.
Not bad for 40,000 on the clock and runs okay, but hills are no longer my friend.
Still on my to do list: Clutch plates.
https://i49.tinypic.com/54hqg1.jpg
https://i47.tinypic.com/rknh2o.jpg |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| gfrancisdev |
This post is not being displayed .
|
 gfrancisdev Nova Slayer

Joined: 18 Oct 2012 Karma :    
|
 Posted: 16:35 - 12 Dec 2012 Post subject: |
 |
|
it's just like mine...just black...and more miles on the clock...and no huge rust patches or dents  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Teflon-Mike |
This post is not being displayed .
|
 Teflon-Mike tl;dr

Joined: 01 Jun 2010 Karma :    
|
 Posted: 22:34 - 12 Dec 2012 Post subject: |
 |
|
OMG are YBR's really starting to get to that age, and price range as to get vandalised and abused to the max?!?!?!?
Bring it ON!
I want to see the knoblies, and some dents in that oversize monsterosity of a silenser!
So far the YBR has managed to utterly uninthuse me, merely exiting the supressed acountany part of my psyce!
They are far too sensible to do DAFT.... so this could be revealing! ____________________ My Webby'Tef's-tQ, loads of stuff about my bikes, my Land-Rovers, and the stuff I do with them!
Current Bikes:'Honda VF1000F' ;'CB750F2N' ;'CB125TD ( 6 3 of em!)'; 'Montesa Cota 248'. Learner FAQ's:= 'U want to Ride a Motorbike! Where Do U start?' |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| HD |
This post is not being displayed .
|
 HD World Chat Champion
Joined: 16 Dec 2009 Karma :   
|
 Posted: 22:37 - 12 Dec 2012 Post subject: |
 |
|
May I ask why have you adopted this and changing it for greenlaning?  ____________________ Rusty '02 Vito Camper + CBR600F3 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| P.addy |
This post is not being displayed .
|
 P.addy Red Rocket
Joined: 14 Feb 2008 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
 Posted: 09:30 - 13 Dec 2012 Post subject: |
 |
|
What's more worrying is I actually quite like riding it, though it is painfully slow!  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| P.addy |
This post is not being displayed .
|
 P.addy Red Rocket
Joined: 14 Feb 2008 Karma :  
|
 Posted: 10:51 - 13 Dec 2012 Post subject: |
 |
|
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
 Posted: 11:17 - 13 Dec 2012 Post subject: |
 |
|
Pah, you've got 15-20mph on me...!
Life in the slow lane  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| WannaBeDude |
This post is not being displayed .
|
 WannaBeDude World Chat Champion
Joined: 05 Jul 2011 Karma :    
|
 Posted: 11:24 - 13 Dec 2012 Post subject: |
 |
|
So wish i could get a new tiddler, mines too small and starting to seize.  ____________________ Jogging on, destination living. |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| HD |
This post is not being displayed .
|
 HD World Chat Champion
Joined: 16 Dec 2009 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| J D |
This post is not being displayed .
|
 J D World Chat Champion
Joined: 08 Jul 2007 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| trevor saxe-coburg-gotha |
This post is not being displayed .
|
 trevor saxe-coburg-gotha World Chat Champion

Joined: 22 Nov 2012 Karma :   
|
 Posted: 18:55 - 13 Dec 2012 Post subject: |
 |
|
Would love to see it w/ knobblies and higher front mud guard.  ____________________ "Life is a sexually transmitted disease and the mortality rate is one hundred percent."
Mobylette Type 50 ---> Raleigh Grifter ---> Neval Minsk 125 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| K13R4N |
This post is not being displayed .
|
 K13R4N L Plate Warrior
Joined: 14 Nov 2012 Karma : 
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| MaybeGuy |
This post is not being displayed .
|
 MaybeGuy Super Spammer

Joined: 12 Mar 2007 Karma :     
|
 Posted: 21:39 - 13 Dec 2012 Post subject: |
 |
|
that little extra bit of fairing is where the offroad comes from ____________________ Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| K13R4N |
This post is not being displayed .
|
 K13R4N L Plate Warrior
Joined: 14 Nov 2012 Karma : 
|
 Posted: 22:12 - 13 Dec 2012 Post subject: |
 |
|
Have just looked them up and they are sold as " the dual sport version of the Yamaha YBR 125 "
" Around 2010, Yamaha introduced the dual sport version of the Yamaha YBR 125. The new model was named Yamaha YBR 125 G, and it featured several off-road improvements. These include: engine and hand guards, higher front fender, anti-collision fender for the head light and new block pattern tires. ____________________ A2 license (33BHP Restriction)
Currently ride 1995 Kawasaki EL250 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| neil. |
This post is not being displayed .
|
 neil. World Chat Champion

Joined: 24 Feb 2008 Karma :    
|
 Posted: 17:10 - 14 Dec 2012 Post subject: |
 |
|
It was a cat D write off, just won my near 2 year court battle with the driver who was responsible and I am waiting for my payout, which includes just over 900 for that bike so I didn't really lose out. Been on a CBF since that accident and haven't ridden the YBR at all. Did promise it to a mate but he lost interest and I didn't have time or inclination to do anything else with it (full time work, the wife, 4 kids and a dog all consume me as well as servicing the CBF). After nearly 2 years of it getting in my way in the garage, I just wanted it gone and I'm really happy to see it end up in a good home. I passed my test on that bike and it holds a lot of sentimental value. It got me to work for 3 years in all weathers when money was incredibly tight and pretty much never gave any trouble. It carried me an equivalent distance of nearly 2 times around the Earth. What a little workhorse it was.  ____________________ CBT February 2008 | A2 June 2008 | Yamaha YBR125 (written off) | Honda CBF125 (current) |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| UnspeedySam |
This post is not being displayed .
|
 UnspeedySam World Chat Champion

Joined: 25 Nov 2009 Karma :  
|
 Posted: 18:24 - 14 Dec 2012 Post subject: |
 |
|
YBRs are incredibly robust little bikes, much like the RXS100 that came before it (lets just forget about the SR shall we?). Did my test on a mate's one and now have a Chinese market one (Jianshe branded, click here for what I'm on about.).
Even when my primary bike is an 850 twin, I still find it brilliant fun for town work and short journeys to the point where I actually pick it over the TRX if I'm popping into town. I am also slightly in love with how superbly simple and cheap they are to work on/fix. So much so I'm thinking of adopting it and buying a Chinese 182cc big bore kit for it. Probably work out at about £50 when delivered...tempting right?  ____________________ Riding: BMW R1150RT `02 bought mildly crashed
Fixing: Also the BMW as I get less broken bits
Gone: ZZR600 '00, TRX850 '97, RXS100 '93, JS125-6B '07, BMW R1100RS '93, Kawasaki ZX-6R-J2 '01, Honda Bros NT400 NC25 '88 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| UnspeedySam |
This post is not being displayed .
|
 UnspeedySam World Chat Champion

Joined: 25 Nov 2009 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Alpha-9 |
This post is not being displayed .
|
 Alpha-9 Super Spammer

Joined: 19 Jan 2012 Karma :  
|
 Posted: 18:44 - 17 Dec 2012 Post subject: |
 |
|
Well well well
So suddenly 125s are cool?
YBRs are great for throwing around a field if you don't care about it, trust me
Bar risers. Link please. Maybe i'll finally be able to fit on mine. ____________________ Fzr-600 1999 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| UnspeedySam |
This post is not being displayed .
|
 UnspeedySam World Chat Champion

Joined: 25 Nov 2009 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| UnspeedySam |
This post is not being displayed .
|
 UnspeedySam World Chat Champion

Joined: 25 Nov 2009 Karma :  
|
 Posted: 21:31 - 17 Dec 2012 Post subject: |
 |
|
The translation google did makes me think that some machining is necessary to make this work. They also recommend an oil cooling system! https://item.taobao.com/item.htm?id=13625581894
It's probably more trouble than it's worth but could make an interesting project!
edit: Ok the description of another 182cc set actually translated to something that made some sense: https://item.taobao.com/item.htm?id=14234138729
| Quote: | Do you think your Sword power does not meet it? Want to overtaking there is pressure thing? Sword modified 182 kit carefully developed after a period of time, not of the research trial and improvement finally succeeded. Bore 65. 5 mM kit durability is very high, but the effect of modified accelerated more violent, these packages are boring cylinder by professional master Liner --- the surgeon fine boring from the cylinder liner spend Zhaoqing large production the Dinghu brand Zhaoqing Liner and domestic brands (genuine Zhaoqing Liner normal service life up to 15-20 million km, other general brands can not match!!) processing the original cylinder boring big pressure into the cylinder liner mill textured fine boring and professional instructors. The piston assembly original CB2520 piston into a lightweight piston, the skirt unique molybdenum disulfide special coating, absolutely genuine original. High durability. And distribution of the original cylinder head gasket to reduce the compression ratio so that it is consistent with the original car, the highest performance, the fever will not be much oil can not retrofit cold and change more play to effect change displacement vertical.
Modified effect: starting speed, power improvement is obvious. Fast speed, ample power, easily overtaking, hand to hand oil are obvious sense to push back. The speed also a slight increase, but must be running - well ... shock and almost original car ..... install only the Cabinet mouth expanded from 60MM to 70MM. . .
Carburetor: Average original carburetor OK, fuel consumption of less than 2 cents a km, really want a change of: 30-for-CG interface caliber main jet to increase fuel supply sufficient quantities, no card oil little problem, if not, it would continue to use it.
Friendly reminder: the new cylinder need to run 1000 km can pull high-speed, sure a good run, treat his wife, to be gentle, this cylinder life will be longer. (Run-in period should not exceed 5000 rpm, and low-grade hard acceleration)
available professional tools to dig the box mouth .. converted debugging requires time for most of the day about eight hours.
If necessary can send mobile messages can also add me Q: 359 953 924 or call 13422750328 dwell.
(Down the original cylinder modified self-custody)
do best, your own peace of mind, but also let riders assured. . .
Engine displacement = piston radius mm * piston radius mm * pi 3.1415926 * stroke mm
182CC = ((65.5 / 2) * (65.5 / 2) * 3.1415926 * 54MM) / 1000 |
Final edit: After much reading of broken english, it looks like the biggest you can go without opening up the cases is:
Bore diameter 57.4mm
Sroke 54mm
Piston pin diameter 15mm
Displacement 139.66cc
On the upside, those kits are more like £20 rather than £40 (before shipping etc etc). The cylinder head still seems to say 123cc on it too  ____________________ Riding: BMW R1150RT `02 bought mildly crashed
Fixing: Also the BMW as I get less broken bits
Gone: ZZR600 '00, TRX850 '97, RXS100 '93, JS125-6B '07, BMW R1100RS '93, Kawasaki ZX-6R-J2 '01, Honda Bros NT400 NC25 '88 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| garth |
This post is not being displayed .
|
 garth World Chat Champion
Joined: 15 Dec 2004 Karma :    
|
 Posted: 09:00 - 18 Dec 2012 Post subject: |
 |
|
140 is still better than nothing, can you link me? Although I'm not fussed about making it any quicker, a little extra up the hills won't go a miss.
If anyone is wondering what it's like off road, wonder no more.
https://i48.tinypic.com/2ry3gc4.jpg
It's shite
Limiting factor is the front mudguard, and obvious lack of grip. It's stood up by itself in that picture. Dunno if I'll bother with wheels and things or not, undecided yet. Quite enjoying just plodding on back roads.
I've done 200 odd miles so far, this thing really doesn't use any fuel!
@Alpha, bar risers are like these
https://i.ebayimg.com/t/Handle-bar-riser-YAMAHA-30mm-Rise-22mm-Bars-ALLOY-/10/!B-yEMpwBmk~$(KGrHqR,!i!EzLW0g01vBM9rBN!CVg~~_12.JPG
Not sure on exact ones as I just had them laying around so chucked them on. There's enough give in all the cables, but I removed the bottom hold on the front brake line (under the yoke). |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 13 years, 337 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|