|
|
| Author |
Message |
| Redoko |
This post is not being displayed .
|
 Redoko World Chat Champion

Joined: 04 Nov 2009 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Ben_m |
This post is not being displayed .
|
 Ben_m Nova Slayer

Joined: 05 Apr 2009 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| yambabe |
This post is not being displayed .
|
 yambabe World Chat Champion

Joined: 12 Jul 2004 Karma :    
|
 Posted: 18:18 - 12 Jan 2013 Post subject: |
 |
|
My employer at the time wanted to reduce my hours from full-time to 1-2 days per week anyway, and after we discussed terms and working conditions I decided that it would be better for me to tell him when I wanted to work which would qualify me to be self-employed. I negotiated a better hourly rate with him as he was no longer responsible to pay me holidays or pay employer NI for me so I felt confident to make the jump. I also had another ex-employer that I was still in touch with who wanted me to work for them but only on a casual basis.
Since then most of my other work has been through word-of-mouth and personal recommendation.
I am a book-keeper and payroll specalist btw. ____________________ Sod falling in love, I wanna fall in chocolate.  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| doggone |
This post is not being displayed .
|
 doggone World Chat Champion

Joined: 20 May 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Redoko |
This post is not being displayed .
|
 Redoko World Chat Champion

Joined: 04 Nov 2009 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| scorps |
This post is not being displayed .
|
 scorps World Chat Champion

Joined: 29 Jan 2007 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Bendy |
This post is not being displayed .
|
 Bendy Mrs Sensible

Joined: 10 Jun 2002 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Pete. |
This post is not being displayed .
|
 Pete. Super Spammer

Joined: 22 Aug 2006 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| fatpies |
This post is not being displayed .
|
 fatpies World Chat Champion

Joined: 01 Mar 2011 Karma :   
|
 Posted: 22:06 - 12 Jan 2013 Post subject: |
 |
|
Ah this.
Simply you need a LOT of discipline and it can cause siege mentality. I.e. you get a big fat job worth £8K or more.
There is temptation to splurge this 8K once the job is done. But you need to keep back 28% of it to give to the tax man.
Second you need to save and keep a reserve amount for lean times. Again the temptation to splurge is certainly there.
You could always go through www.peopleperhour.com
I sometimes subcontract jobs to people on there, it apparently costs nothing to join and bid but they take 5% from the fee you agree. What normally happens is a nominal fee is agreed and you pay outside the system.
Never go through Yellow pages or the papers, it will generate bog all. Carpet bombing flyers is also out of the question. Sticking cards and stuff at builders merchants and people who you envisage will use your service. Might be an idea.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Anyway. I'm not having a dig these are simply my true thoughts.
Your biggest kicker is simply how do you differentiate and stand out above everyone else? Looking at your website it is nothing special, I can buy even better models off turbosquid.
https://www.turbosquid.com/FullPreview/Index.cfm/ID/538904
$50
Or your enzo:
https://www.turbosquid.com/3d-models/ferrari-enzo-3d-max/632464
$50 buys a NERBS model
https://www.turbosquid.com/FullPreview/Index.cfm/ID/542282
a $0 one as well.
Secondly millions of kiddies have been using Blender, freemaya and free lightwave for nearly a decade now. Brian a buddy of mine quit the 3D industry at the start of the 00s as he saw milkshape blender and 3DS being widely pirated allowing everyman woman and child to be able to do it.
As said with oldpink's business plan. Why should I choose somebody like you over somebody else? ____________________ "It's easy to attack and destroy an act of creation. It's a lot more difficult to perform one" |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| daemonoid |
This post is not being displayed .
|
 daemonoid World Chat Champion

Joined: 27 Jun 2008 Karma :    
|
 Posted: 22:22 - 12 Jan 2013 Post subject: |
 |
|
Portfolio is the most important thing in your line of work. It's worth working in a low paid job at any name you can so that you can add decent work to your show reel.
After experience, networking is the key - get out and meet people in the industry (a normal job will help this immensely). There's plenty of organisations for your line of work - I know the igda meet in London quite often (but that's slightly outside of your speciality). I've been a couple of times and it's pretty easy to talk to people, but I was working in the industry.
Other companies are taking people on for short term contracts - try contacting recruiters for one or two of them. ____________________ current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Redoko |
This post is not being displayed .
|
 Redoko World Chat Champion

Joined: 04 Nov 2009 Karma :    
|
 Posted: 22:30 - 12 Jan 2013 Post subject: |
 |
|
| fatpies wrote: | Ah this.
Simply you need a LOT of discipline and it can cause siege mentality. I.e. you get a big fat job worth £8K or more.
There is temptation to splurge this 8K once the job is done. But you need to keep back 28% of it to give to the tax man.
Second you need to save and keep a reserve amount for lean times. Again the temptation to splurge is certainly there.
You could always go through www.peopleperhour.com
I sometimes subcontract jobs to people on there, it apparently costs nothing to join and bid but they take 5% from the fee you agree. What normally happens is a nominal fee is agreed and you pay outside the system.
Never go through Yellow pages or the papers, it will generate bog all. Carpet bombing flyers is also out of the question. Sticking cards and stuff at builders merchants and people who you envisage will use your service. Might be an idea.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Anyway. I'm not having a dig these are simply my true thoughts.
Your biggest kicker is simply how do you differentiate and stand out above everyone else? Looking at your website it is nothing special, I can buy even better models off turbosquid.
https://www.turbosquid.com/FullPreview/Index.cfm/ID/538904
$50
Or your enzo:
https://www.turbosquid.com/3d-models/ferrari-enzo-3d-max/632464
$50 buys a NERBS model
https://www.turbosquid.com/FullPreview/Index.cfm/ID/542282
a $0 one as well.
Secondly millions of kiddies have been using Blender, freemaya and free lightwave for nearly a decade now. Brian a buddy of mine quit the 3D industry at the start of the 00s as he saw milkshape blender and 3DS being widely pirated allowing everyman woman and child to be able to do it.
As said with oldpink's business plan. Why should I choose somebody like you over somebody else? |
I appreciate the first part of your post, but did you actually read my site?
I'm a visualiser. Not a modeler.
I don't sell the models I make. I use them.
The Enzo was modeled a long time ago. During the break between my first and second year. It was a refresher project for me to recap 3DS MAX during the break.
I'm sure a younger generation is now learning this software. I've written a dissertation that touches the very subject. Fact is, it takes years to master industry standard programmes. Blender is not comparable to the AutoDesk suite because they are completely different. It's like comparing a bike to a car, irrelevant.
Not sure on your point about pirated software. Mine is legit. I have a license until 2014.
I'll give you the website, currently playing around with WordPress. ____________________ "Let's face it, this is not the worst thing you've caught me doing."
Sudika Sportsman SK50QT > Gilera DNA50 > Honda CBR125 RW7 > Kawasaki Zephyr750 > Suzuki GSXR600 > Honda Hornet CB600F '51 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Redoko |
This post is not being displayed .
|
 Redoko World Chat Champion

Joined: 04 Nov 2009 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| fatpies |
This post is not being displayed .
|
 fatpies World Chat Champion

Joined: 01 Mar 2011 Karma :   
|
 Posted: 23:06 - 12 Jan 2013 Post subject: |
 |
|
| Redoko wrote: | I'm a visualiser. Not a modeler.
I don't sell the models I make. I use them. |
So educate me, what is the difference ? To my unexperienced mind what you are doing is modelling objects and merely camera matching them to real life photos or situations.
To my mind the gap between modeller and visualiser does not seem great. Infering from the website pictures. Objects which are either simple (buildings) or readily downloadable off squid.
| Redoko wrote: | I'm sure a younger generation is now learning this software. I've written a dissertation that touches the very subject. |
| Redoko wrote: | Fact is, it takes years to master industry standard programmes. |
| Redoko wrote: | Blender is not comparable to the AutoDesk suite because they are completely different. It's like comparing a bike to a car, irrelevant. |
| Redoko wrote: | Not sure on your point about pirated software. Mine is legit. I have a license until 2014. |
Read those points and join the dots.
Or don't.
I'm not saying your version is a pirate.
But if you want it then it is certainly possible. If BCF regularly asks for 'sources' of software. I'm sure I have a copy of 3DS5 somewhere.
Then what prevents kiddies who were once using blender to upgrade and use something from Autodesk. Or something legit? Maya IIRC had a non comercial free version released once.
What prevents others from downloading those programs at a young age and then putting in the years to become masters?
As previously I'm not having a dig. I'm just being realistic. ____________________ "It's easy to attack and destroy an act of creation. It's a lot more difficult to perform one" |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| scorps |
This post is not being displayed .
|
 scorps World Chat Champion

Joined: 29 Jan 2007 Karma :  
|
 Posted: 23:08 - 12 Jan 2013 Post subject: Re: . |
 |
|
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Redoko |
This post is not being displayed .
|
 Redoko World Chat Champion

Joined: 04 Nov 2009 Karma :    
|
 Posted: 23:42 - 12 Jan 2013 Post subject: |
 |
|
| fatpies wrote: | | Redoko wrote: | I'm a visualiser. Not a modeler.
I don't sell the models I make. I use them. |
So educate me, what is the difference ? To my unexperienced mind what you are doing is modelling objects and merely camera matching them to real life photos or situations.
To my mind the gap between modeller and visualiser does not seem great. Infering from the website pictures. Objects which are either simple (buildings) or readily downloadable off squid.
| Redoko wrote: | I'm sure a younger generation is now learning this software. I've written a dissertation that touches the very subject. |
| Redoko wrote: | Fact is, it takes years to master industry standard programmes. |
| Redoko wrote: | Blender is not comparable to the AutoDesk suite because they are completely different. It's like comparing a bike to a car, irrelevant. |
| Redoko wrote: | Not sure on your point about pirated software. Mine is legit. I have a license until 2014. |
Read those points and join the dots.
Or don't.
I'm not saying your version is a pirate.
But if you want it then it is certainly possible. If BCF regularly asks for 'sources' of software. I'm sure I have a copy of 3DS5 somewhere.
Then what prevents kiddies who were once using blender to upgrade and use something from Autodesk. Or something legit? Maya IIRC had a non comercial free version released once.
What prevents others from downloading those programs at a young age and then putting in the years to become masters?
As previously I'm not having a dig. I'm just being realistic. |
No I understand you are not trying to pick a fight. What I'm unclear about is your point on pirated software?
I won't go into everything in huge detail because we will be here all night. But I will try and educate you. I do think a lot of this forum doesn't appreciate the work that goes into CGI, a lot of it thinking the computer does everything for you.
I will explain a bit more about what I do. It takes hundreds of hours to complete a render. There are multiple jobs involved, which can be split by a studio of specialists.
For instance, there is the modeller. Obviously, the job is to build the geometry. It needs to be low polly, correctly built. Depending on the job they're are different requirements, for instance a character modeller (an unbelievably hard job) has to create the character using quads. This means every face has to be a square, not a triangle. Easy you might think, it is not, a human face being almost impossible. I managed it but it was difficult.
Brings me on to a side point, most models available online are terrible. The free ones especially. The Polly count is too high, model isnt correctly scaled etc.
The next job is materials. A time consuming job that takes hours and will always have to be revisited. Materials might have to be created. I have a library containing thousands, yet I constantly need more.
Lighting is next, I think this part is probably the hardest to appreciate because everyone takes it for granted. You literally have to create every light in the scene, work with reflections, shadows etc. This part can easily push a project over a deadline and grind it to a halt if not done correctly or not enough time has been allocated. It's not just "putting in a light bulb". You have to match every light to its real life counter part. Literally. There are libraries of bulbs simulating exactly what their like in real life.
If you've read this far, great. Next up, camera matching. Camera matching is hugely difficult. Setting up the perspective, camera width, lens etc the virtual camera must be exactly the same. Probably a few hours to be done right. Although this process only applies to CGI composition projects, you will need to create a virtual camera for completely CGI scenes but you won't have to match perspectives for still renders.
Rendering time! Yes this is a job in its self. There are specialists that are hired specifically for this purpose. I'm not sure if you've seen the interface for 3D programmes. I've been using MAX for almost three years and they're are still buttons that I don't know what for. Rendering takes time. To actually render and to get the settings right. You need to balance quality with time. Better quality, more time to render. High quality HD renders can take 10 hours on a single machine. This time must be considered into your management. Well before deadline. Because there will almost certainly be changes to be made and I haven't even started on post production.
Post production requires proper software. You need to be very proficient in multiple types of post production software. Photoshop, after effects and premier pro are the ones I use. Post production is crucial because renders fresh off the plate are disgusting and there are elements that are always needed to be added.
They're pretty much the main steps, there is a lot I haven't mentioned. I do all of these steps. I am proficient in numerous software packages, I have to be. I don't have the luxury of a studio to divide up the jobs. But companies such as NeoScape will have a whole studio working a project. Each member a specialist in their chosen area. I can't really give an example of just how difficult it is to something you can relate to but maybe this helped.
Just seen your me took about kids moving from Blender to MAX. It is possible, but no different from them coming from photoshop to max. It's a completely new software package. Like riding a bike from driving a car, you know where you want to get to, but getting there is completely different. I am not aware of a free maya version being released, but then maya is used for character and organic creations rather than max which is mainly geometric. (There's an in-joke between MAX and MAYA users on which ones better, when in reality they're similar packages built by the same company but for different uses.)
I can't really remember where I was going with this, but I hope you now have a better under understanding what actually goes into CGI and the work done by CGI artists.
This is quite possibly my largest post on BCF. ____________________ "Let's face it, this is not the worst thing you've caught me doing."
Sudika Sportsman SK50QT > Gilera DNA50 > Honda CBR125 RW7 > Kawasaki Zephyr750 > Suzuki GSXR600 > Honda Hornet CB600F '51 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| TUG |
This post is not being displayed .
|
 TUG World Chat Champion
Joined: 12 May 2007 Karma :  
|
 Posted: 02:18 - 13 Jan 2013 Post subject: |
 |
|
Through word of mouth
Its tough without the monthly paycheck but I'd rather be without if it means less pain for me
Word of mouth is #1 in advertising, but I know of ways to bring in clients now that I didn't using print ads and tv ads, branding etc, college has taught me a lot but finding people to pay me for what I've spent a long time studying is hard in itself when there are companies spitting out shit for peanuts.
I would suggest re working that logo etc, it's very bland and given that I know what you can produce, doesn't represent you at all.
Drop me a PM if you want some help, I'd be more than happy to help you.  ____________________ Haz ER-5, innit! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| TUG |
This post is not being displayed .
|
 TUG World Chat Champion
Joined: 12 May 2007 Karma :  
|
 Posted: 02:26 - 13 Jan 2013 Post subject: |
 |
|
| Redoko wrote: | | daemonoid wrote: | Portfolio is the most important thing in your line of work. It's worth working in a low paid job at any name you can so that you can add decent work to your show reel.
After experience, networking is the key - get out and meet people in the industry (a normal job will help this immensely). There's plenty of organisations for your line of work - I know the igda meet in London quite often (but that's slightly outside of your speciality). I've been a couple of times and it's pretty easy to talk to people, but I was working in the industry.
Other companies are taking people on for short term contracts - try contacting recruiters for one or two of them. |
Portfolio is something we're focusing on this year. Every project is geared towards it and I'm currently working with a couple of clients simultaneously. Taking as much work as I can get. Testing my project management skills to the limit.
Although I can't wait to add the work to my portfolio.
Is there anything you feel I should add to my site content wise? Is there anything you'd need or like to see that isn't there? |
Same here, every tom, dick and harry is going the "buying a portfolio case and whacking it in" approach so I intend on fucking that off and creating a nice pdf portfolio, with a hidden weapon.
as far as your site goes, again, the presentation of your work I.E. the product, doesn't reflect what you can do, and as your running wordpress you could do much much more than using a bland theme. I work with wordpress a lot because people find it easy to use, I've since decided that i'm more designer than programmer because I simply don't have the time to learn it beyond the point i'm at so if stuff starts going well i'll be getting others to prog for me.
Again, drop me a PM and i'll try to help best I can  ____________________ Haz ER-5, innit! |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| J.M. |
This post is not being displayed .
|
 J.M. World Chat Champion

Joined: 27 Mar 2011 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Bendy |
This post is not being displayed .
|
 Bendy Mrs Sensible

Joined: 10 Jun 2002 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| fatpies |
This post is not being displayed .
|
 fatpies World Chat Champion

Joined: 01 Mar 2011 Karma :   
|
 Posted: 08:33 - 13 Jan 2013 Post subject: |
 |
|
| J.M. wrote: |
I *think* his point is about how kids can start learning how to use this software at young ages, like 12. If they enjoy it, by the time they're 18 they're stupidly good at it. Although, I'm not sure how that really relates to you, I'm too tired to fully comprehend/read the entire thread.
It's similar to me and my learning of programming. I learnt to program flash games/applications in AS2 and AS3 self taught at around 14-15 years old using a pirated copy of Adobe Creative Suite. Without that pirated copy, I probably would never have gotten in to programming and be anywhere near the standard that I'm at now. I wanted to make a flash game as it interested me, so I learnt. . |
Yup..... the point is that the barrier to entry is not huge. Therefore the number of competitors you have is also huge. While they many not have gone to university in arty things this matters a whole lot less. In the 90s the high spec hardware & expensive software was a barrier. Now everyman and his dog can have a go.
This is why you need to stand out from the crowd. The crowd is large and getting larger. And from your webby you don't stand out from the crowd. You might stand out on BCF, and BCF is diverse but BCF isn't primarily your peer group.
| Bendy wrote: | His point is that because the software can be obtained for free, you get kids doing it, and when you get kids doing it there can be a perception that it isn't something worth paying a lot for.
Exactly the same thin happened to building websites - once the preserve of nerds, it then got 'easy' and everyone started doing it. Clients will come along and say 'oh my nephew said he'd do it for me for fifty quid' and there's your customer gone.
If your clients are unlikely to know the difference between good modelling and bad modelling, you need to explain it to them. |
Yup this as well. Which again means on your webby you need to stand out from the crowd and explain in as few words as possible even give examples (like Almax) does of why they should choose you over their 14 year old nephew.
Which means you CANNOT COMPETE ON COST ALONE.
There is a certain irony in this post and the situation is aptly demonstrated here. I don't know about 3D modelling, visualising or whatever other than living with Brian and Steve for a bit who worked in the industry (games).
You don't know me from jack, the fact I'm just another person I could be a potential customer or not. You had to explain it to me. I now know. The fact you did this should ring alarm bells.
So why does your website not tell me this? Its wordy and long so maybe a <4 minute youtube video would help?
As said I wish you luck and I'm only saying this so you maybe don't make so many mistakes. ____________________ "It's easy to attack and destroy an act of creation. It's a lot more difficult to perform one" |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| daemonoid |
This post is not being displayed .
|
 daemonoid World Chat Champion

Joined: 27 Jun 2008 Karma :    
|
 Posted: 09:43 - 13 Jan 2013 Post subject: |
 |
|
I feel this thread has gone off at a bit of a tangent...
Redoko's customers are never going to be the average joe's who just need to get a pretty graphic or two. His customers will be big companies who know exactly what they're doing, probably in the areas of games, movies or architecture.
There's no need to explain to the un-initiated why getting a decent artist in is necessary because most of the reasons do not apply to them.
Your site needs to be aimed at your customers and it is!
Your biggest problem is that you've hit a highly saturated market nowadays. There are many around who have your skills, a portfolio will not be a differentiator unless it is the best of the best it will just be enough to get you in the door.
One possibility is to push down the product side of things - get into 3D printing and get in now. It really is the future of product design (if not manufacture as well). Learn the pitfalls and get a head start on all the other artists who will head in that direction in the coming years. ____________________ current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| fatpies |
This post is not being displayed .
|
 fatpies World Chat Champion

Joined: 01 Mar 2011 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Redoko |
This post is not being displayed .
|
 Redoko World Chat Champion

Joined: 04 Nov 2009 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| cimbian |
This post is not being displayed .
|
 cimbian World Chat Champion

Joined: 27 Sep 2012 Karma :   
|
 Posted: 15:40 - 13 Jan 2013 Post subject: |
 |
|
My primary business is selling equipment to factories for production of electronics so is totally B2B and there is relatively little of it in my local area so I basically ignored local events etc.; however, a couple of years ago I branched-out into laser engraving and some laser fabrication.
As a by-product of the laser business I now have a line of products that are B2C (they are silicon wristbands with ICE info laser engraved). During review with my bank manager he invited me to join a local business networking group.
Because the laser business and the ICE business is now more local this made sense so I went-along with him and subsequently joined. It is a very informal group. We meet Friday lunchtime, once a month, for an excellent lunch and every one has a short slot to talk about what they are doing and referrals.
Since joining I have had several referrals including one for laser-piercing custom business cards and another that could see my ICE bands on major international airlines. Additionally the ICE bands were initially for kids but through this group's encouragement I now do adult ones for adrenaline sports (similar to the kids ones but with blood group and first name engraved).
The last meeting I was at I met a woman with a small business making bespoke wedding invitations etc. and she is interested in using my laser service to do the cutting. She would supply a design, I would digitise and then cut for her. The hand-painting etc. that she adds she would do afterwards.
So, my advice is to seek-out the networking groups in your area and see if they can help. It costs me £180 for the year including the lunches and a dedicated page on the groups website.
Good luck.
TL;DR: Join a business networking group ____________________ 22PlusY
Current: Moto Guzzi 1100 Breva. Previous: Honda XL650V TransAlp
Bearded, Balding, Born again Buddhist Biker |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 13 years, 310 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|