98 zx9r advice on frame needed

[neiloggy1]

Hi all
Some twonk knocked me off my 98 zx9r this morning
And bent the rear subframe beyond repair.
Now it would be easier for me to get another frame and change all parts over then re mot.
My question is what year frames will my engine,forks,swingarm,seat,tank,fairings etc fit
Or am I just stuck to a 98 frame ??
which would be a pain as there is none on fleabay.
Cheers all
____________________
98 zx9r

[RhynoCZ]

You say, the rear subframe is damaged and you talk about engine, forks, swing arm, seat, tank, fairings...?

Just get new subframe
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor

[neiloggy1]

[CaNsA]

write off.

[mab]

1998 or 1999

Check part numbers but iirc there was no change between C1 and C2 models

[mab]

1998 or 1999

Check part numbers but iirc there was no change between C1 and C2 models

[RhynoCZ]

Well, I'd say every ZX9R frame would work for you. Just measure some things to be sure the engine, forks and swingarm fit, the rest is easy to adjust.

As I know kawasaki they used the same stuff for years, so I think that gives you about 8-9 years search range.
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor

[lihp]

According to MCN the 98 is covered in the ZX9R B1 from 96-2002
____________________
covent.gardens: lihp is my most favourite member ever

[neiloggy1]

Excellent gives me a few options then
____________________
98 zx9r