cb600 bodge bash put together thing :)

[Welshd1k]

Wel i wrote of my hornet 2 years ago this month and today i finally got another one road legal been ages building it / collecting bits but she is well running (rough) brakes are EFFIN AMAZING BALLS and sounds nice

started off collecting along list of bits and was going to build it all onto a new frame untill a hornet popped up on ebay with ohlins / gillies full arrow system for £1000
so the project began :

so my pile of collected bits :
https://sphotos-b.ak.fbcdn.net/hphotos-ak-frc1/482488_10152818827870244_1517706577_n.jpg


the stock ish bike i bought :
[img]https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/559256_10153314468080244_1194100144_n.jpg[/img]

first thing was first ohlins off and sold for £320 , gillies sold for £120, my spare frame sold for £250 . then strip off the forks and swing arm ready for my 'trick bits'

the 'trick bits'
Penske Shock
CBr600 F4i forks with ohlins internals (9nm)
EBC prolite disks
Sprint steering damper
Metchamex swing arm with cbr1000 wheel (190 profile tyre)
MV agusta F4 rear caliper and one off bracket
SeS rearsets
new black braided lines
projector headlamp

off with the old

https://sphotos-e.ak.fbcdn.net/hphotos-ak-prn2/1186026_10153227755575244_1463198702_n.jpg


on with the 'new'
https://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/1000956_10153227755295244_1587459189_n.jpg

https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/1235318_10153234837765244_28375275_n.jpg

and as she sits now(just with a chain fitted :
https://sphotos-d.ak.fbcdn.net/hphotos-ak-ash3/1236075_10153250133150244_521230669_n.jpg

https://scontent-a-cdg.xx.fbcdn.net/hphotos-prn2/1208774_10153250132690244_796498926_n.jpg


list of things it needs
sort the fuel starvation(what i think it is atleast)
PAINT BADLY
tidy up the front end new digi clocks
fit my quick shifter
possible cbr600 cams
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<

[hmmmnz]

looks pretty cool bar the projecter lights,
why didnt you go for a usd front end??
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Welshd1k]

Because the front end swap was purely for brakes and cost me £150 would cost me 200 for just yokes for the blade front end as the stems don't push out there welded so have to get a stem made up . Cbr forks just machine the stock yokes out 2mm to 43mm I got lucky with the forks paid £50 for them when I got them and stripped them to rebuild them found the springs etc already fitted so had a bargain £50 forks .£30 to do the yokes £60 calipers and sp1 master cylinder . The disks are hornet as is the 17" front wheel it's built on a budget / as cheap as possible lol
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<

[CarlosCBR]

No need to PAINT BADLY, looks like it's already been accomplished.
____________________
https://www.youtube.com/watch?v=1OPv5mDPQ14

https://www.facebook.com/carl.simmonds.7

[Welshd1k]

Yeah she's mint ain't she like new :p u mean I spent silly money on a new hornet can you tell
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<