Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Pulse Adreniline 125 issues

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

ross_1992
L Plate Warrior



Joined: 02 Jan 2014
Karma :

PostPosted: 23:02 - 05 Jan 2014    Post subject: Pulse Adreniline 125 issues Reply with quote

Firstly i brought this bike around 1 week ago and since that the indicators have stopped working correctly, when i press the indicators all lights flash rather then just the one side.

Secondly the battery only lasts around 1-2hours which im taking it to be an bad battery which is only £20-£30 replacement. I did think it was the alternator but then it allowed me to jump start it.

Thirdly today when putting the battery in, and connecting the power connecters (pos first, neg last) the tiny green wire that connects onto the positive side burnt out and now it wont work at all? does anyone know the issue?


How much would it cost me to take it to my local bike shop to get rewired?? thanks
 Back to top
View user's profile Send private message You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.

ross_1992
L Plate Warrior



Joined: 02 Jan 2014
Karma :

PostPosted: 01:25 - 06 Jan 2014    Post subject: Reply with quote

_Iain_ wrote:
Between £60 & £90 an hour. Electrical is time consuming work.

You've most likely got a short somewhere.


So how many hours will this take roughly..

Just so i have a rough price, will they check the bike over free of charge and then let me know the price?

any why wont the battery start the bike now??..

Cheers
 Back to top
View user's profile Send private message You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 02:11 - 06 Jan 2014    Post subject: Reply with quote

If you give them the bike and say rewire the bike mate could be 3-4 hours (including finding the issue not just replacing burnt wires)

Give them this https://www.ebay.co.uk/itm/NEW-Superbyke-RMR-125-Wiring-Loom-Pulse-Adrenaline-Sinnis-Apache-/110974009540?pt=UK_Motorcycle_Parts&hash=item19d69100c4

and say can you fit it probably alot less.

Myself? i'd buy the above and fit it on the Friday and work out how I cocked up fitting it on the saturday and fix what I cocked up sunday ride to work monday.


Also check the main fuses
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

wr6133
World Chat Champion



Joined: 31 Dec 2013
Karma :

PostPosted: 08:53 - 06 Jan 2014    Post subject: Reply with quote

SQL wrote:
If you give them the bike and say rewire the bike mate could be 3-4 hours (including finding the issue not just replacing burnt wires)

Give them this https://www.ebay.co.uk/itm/NEW-Superbyke-RMR-125-Wiring-Loom-Pulse-Adrenaline-Sinnis-Apache-/110974009540?pt=UK_Motorcycle_Parts&hash=item19d69100c4

and say can you fit it probably alot less.

Myself? i'd buy the above and fit it on the Friday and work out how I cocked up fitting it on the saturday and fix what I cocked up sunday ride to work monday.


Also check the main fuses


A 3 quid multimeter, one of the many guides that can be found online and some time would be enough for you yourself to diagnose your problem

As to a new loom, again do it yourself, it not's an epic task by any means just a little fiddly. Why pay somebody up to 90 quid an hour to basically take some wires out then put some back in? (ok it's a little more involved than that but not hard)

If you take the time to do these tasks yourself then what you learn can be invaluable and save you time/money/stress in the future.
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 08:59 - 06 Jan 2014    Post subject: Reply with quote

Rewiring a Pulse Adrenaline is not a taxing task; I rewired mine a couple of times. The cause of the issue is likely to be the fact that insulation used is crap, so it'll have shorted somewhere. Buy a replacement loom, spend a couple of hours fitting it, and then take a good long look at the reg/rec, battery and CDI. If they came out of it intact, then you're laughing. If they didn't, then it's still a relatively inexpensive fix.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 04:38 - 07 Jan 2014    Post subject: Reply with quote

_Iain_ wrote:
Between £60 & £90 an hour. Electrical is time consuming work.

You've most likely got a short somewhere.


Where did you get this idea?
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 316 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.12 Sec - Server Load: 0.81 - MySQL Queries: 13 - Page Size: 60.75 Kb