Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


NSR Derestriction Expedition

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

AdamBoyle
Nova Slayer



Joined: 29 Aug 2004
Karma :

PostPosted: 21:36 - 02 Jan 2005    Post subject: NSR Derestriction Expedition Reply with quote

Evening!
Ive just spent the last hour or so getting my NSR down to its intake to check whether or not its restricted. When i got down to it there was a gold plate there, but it doesnt look anything like the one shown on nsr125.com - this one was quite thick and had a small piece that extended a short distance down the intake tract..

Sorry if this question seems stupid, but does anybody have any more pictures of what it should look like? The piece that stuck out had a small jutting-out-bit on the top, i would take a picture but i dont have a digital camera!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mr jamez
World Chat Champion



Joined: 04 Aug 2003
Karma :

PostPosted: 21:48 - 02 Jan 2005    Post subject: Reply with quote

Did it look like this?

https://www.psndealer.com/powersportsdlr/images/ec0190/79-0751.jpg

If so that is the reed valve, you need that. The restrictor plate is just a flat piece of metal with a hole in it.

What NSR have you got? import or UK model? as the way they are restricted varies between the models.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

AdamBoyle
Nova Slayer



Joined: 29 Aug 2004
Karma :

PostPosted: 21:50 - 02 Jan 2005    Post subject: Reply with quote

Yeah it looked a bit like that, just in gold. Its a UK bike, NSR125R i think (well clocks are in miles, so i assume its not an import..) - Sorry for the newbie-sounding question, but ive only just got this NSR Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mr jamez
World Chat Champion



Joined: 04 Aug 2003
Karma :

PostPosted: 22:08 - 02 Jan 2005    Post subject: Reply with quote

What year is the bike? it will say on the V5 if it is an import also I think.

UK bikes had a restrictor in the exhaust and intake tract, sometimes a smaller rear sprocket to lower the top speed.

Imports had restrictors in the CDI and power valve system, I believe some also had the exhausts tampered with. Though these vary depending on what country they were made in.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

AdamBoyle
Nova Slayer



Joined: 29 Aug 2004
Karma :

PostPosted: 22:10 - 02 Jan 2005    Post subject: Reply with quote

The bike is a 1996 P, and ive only just bought it (Friday) so i havent got the V5 back from the DVLA yet... The bike has a micron exhaust on it, so i doubt its restricted that way..
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

alains
World Chat Champion



Joined: 08 Jul 2004
Karma :

PostPosted: 23:39 - 02 Jan 2005    Post subject: Reply with quote

does it look like this (nearly 2mm thick) ?
____________________
the worst day fishing is better than the best day working
 Back to top
View user's profile Send private message You must be logged in to rate posts

mr jamez
World Chat Champion



Joined: 04 Aug 2003
Karma :

PostPosted: 23:40 - 02 Jan 2005    Post subject: Reply with quote

Well if there is no intake restriction and it has a micron exhaust, and is without doubt a UK bike, then it is highly likely that it is fully derestricted. If it does 90mph - 100mph and 60mph in about 7 seconds then it is full power.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 261 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.11 Sec - Server Load: 1.41 - MySQL Queries: 13 - Page Size: 51.96 Kb