Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


GSXR SRAD running awful after chain and sprocket change

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

dragstaar
World Chat Champion



Joined: 18 Aug 2010
Karma :

PostPosted: 14:13 - 05 Mar 2014    Post subject: GSXR SRAD running awful after chain and sprocket change Reply with quote

I went to get my chain and sprocket changed at FWR tyres in stockwell. The bike was perfectly fine on the way there.

On the way back (as soon as they handed me the keys), the bike was running rough, as I got further down the road, it wouldn’t accelerate, the exhaust sounded sort of farty, not the usual sound. As if there was a leak somewhere. I managed to accelerate it up to the red line and held it there for a bit, and it sounded a little bit better for a bit, then got sputtery again.

The bike was running rough all the way home, then cut out on the driveway and wouldn’t start. Any ideas what it could be. I only took it in for a chain and sprocket change. And I didn’t even move it when they gave it back and I fired it up, and it sounded bad.

Is this a question of sparks gone? Only a few cylinders running? Or could it be something else the guys in the shop accidently displaced whilst changing my chain and sprocket?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 14:27 - 05 Mar 2014    Post subject: Reply with quote

Interesting. Thinking

Chain & sprockets is all external work with no access issues. I.e - need to get at top of engine, bother the plugs etc.

Check all HT leads are properly seated on the plugs.

Very strange.
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 14:35 - 05 Mar 2014    Post subject: Reply with quote

With hindsight, I'd have stayed put and asked them "Dude, why's my bike running like poo"?

I dare say they'd be in a better position to know what's happened?

hashtagjustsaying
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Matt B
World Chat Champion



Joined: 01 May 2012
Karma :

PostPosted: 14:40 - 05 Mar 2014    Post subject: Reply with quote

Minty wrote:
With hindsight, I'd have stayed put and asked them "Dude, why's my bike running like poo"?


+1

How well do you trust these guys? You sure somebody didn't want to take your SRAD for a blat around after fitting and manage to knacker it?

Maybe something just got jolted loose when they were hammering the sprockets off?
____________________
stinkwheel: He had an animated .gif of a cat performing fellatio. It's not socially acceptable. It can have real life adverse effects on other people.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Busa1340R
Nova Slayer



Joined: 18 Feb 2014
Karma :

PostPosted: 17:18 - 05 Mar 2014    Post subject: Reply with quote

Just my 2p worth. Although the chain and sprocket replacement is a pretty much standalone job.....is it possible that they disturbed/broke/trapped something when they removed the front sprocket cover......such as sidestand switch/speedo sensor/trapped tank breather when cover screwed back on??
____________________
Current: 2010 Suzuki GSX1340R Hayabusa, 2013 Yamaha YP250R X-Max Sport - Previous: Triumph Sprint ST1050ABS, Honda XL600V Transalp, Honda NT650V Dullsville (don't ask!), Kawasaki ZX9R E1, Honda NX650 Dominator, Suzuki GSX1300RKZ Hayabusa, Honda CBR1000FM, Kawasaki GPZ500S, etc etc
 Back to top
View user's profile Send private message You must be logged in to rate posts

davebike
World Chat Champion



Joined: 15 Nov 2013
Karma :

PostPosted: 19:25 - 05 Mar 2014    Post subject: Reply with quote

Fairly easy to trap a wire or breather hose behind front sprocket cover

I pull the cover back off and check their work as a first check

Dave
____________________
Dave
NC750Xdct + others at work !
[email protected]
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dragstaar
World Chat Champion



Joined: 18 Aug 2010
Karma :

PostPosted: 22:26 - 05 Mar 2014    Post subject: Reply with quote

Right, this makes sense. I didn't think it was that easy to trap breather hoses in the sprocket cover.

If anyone's been to FWR they'll know the workshop. Its all pretty open and its ride in and ride out. I was in there the whole time while the guy did it.

I'll have to have a look at the weekend to see if anything has been trapped or if the guy has knocked anything.

I know, it was stupid, I shouldn't have ridden off. But you live and learn eh?
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 260 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.42 - MySQL Queries: 15 - Page Size: 52.3 Kb