Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Lowering a GSXR. Bad Idea?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

DSK
Nova Slayer



Joined: 12 Jul 2012
Karma :

PostPosted: 14:42 - 22 Apr 2014    Post subject: Lowering a GSXR. Bad Idea? Reply with quote

I have a 750 SRAD, and being only 5ft 6 I have issues touching the ground and Manoeuvring it.

I've played with the pre-load and compression on the suspension, but yesterday on a bike run I stopped next to a slight dip in the road and it went over with me. I managed to hop out the way but it was embarrassing and caused a little damage.

I have avoided the option of lowering it as I thought it would
A - Look Gay
B - Ruin the handling.

So if I get -25mm dog bones for the rear shock, how much do I need to drop the forks to keep it the same geometry wise as it is now?

Do the -25mm dog bones effectively change the rear spring rate? So that I'd need to change other settings to compensate.

Or do I just call it quits with my all time favourite bike and get something more shorty orientated?

Cheers
Stu
____________________
Current Bike - 1990 CBR600 FL Benetton edition.
 Back to top
View user's profile Send private message You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 14:52 - 22 Apr 2014    Post subject: Reply with quote

Start here
https://www.bikechatforums.com/viewtopic.php?t=230544
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :

PostPosted: 14:56 - 22 Apr 2014    Post subject: Reply with quote

Never lower a sports bike, you'll ruin it. It's designed to work as it is. Thumbs Up
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :

PostPosted: 16:26 - 22 Apr 2014    Post subject: Reply with quote

I have differant dog bones on my Exup 1000 and 5mm shorter ones equates to a rise of about 25mm at the backend.This gave me quicker steering and was just as stable as before.

Is there a threaded clevis on the top shock mount of your Gixer?If so,you can change the rear ride height to a degree using this.Then you can compensate by dropping the forks through the yokes by an amount not more than 10mm.

Keep a note of all of the changes made,doing one at a time until you feel comfortable.Just do not make any drastic changes.

Being 5' 6" is not short as I have seen quite a few people manage similar sport bikes in the past.
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 16:53 - 22 Apr 2014    Post subject: Reply with quote

My mate bought a brand new GSXR and the shop lowered it 30mm as he too is a short-arse. I don't recall him complaining about any poor handling.

The -25 dogbones won't change the spring rate much if any at all and simply dropping the forks the same amount through the yokes will preserve the geometry at the expense of a couple of mm shorter wheelbase. This is a lot less than the difference between a new chain and a worn one so don't worry about that. Again, the difference between new suspension and 20k miles suspension is likely to be more.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 212 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.04 Sec - Server Load: 1.58 - MySQL Queries: 13 - Page Size: 51.01 Kb