Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Wide tool cabinets

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Coxyzxr
Brolly Dolly



Joined: 22 May 2008
Karma :

PostPosted: 18:17 - 24 Apr 2014    Post subject: Wide tool cabinets Reply with quote

Hi all,

Any of you know of a place or manufacturer/supplier of tool cabinets as wide as this?

https://i1222.photobucket.com/albums/dd496/GBTOOLS/KRL.jpg

You can imagine what kind of ££££ Snap on want for these, yet they seem to be the only company making such wide cabs.

Thank you.
____________________
**WAS FITTED "WRONG WAY ROUND" !** CANT ACCOUNT FOR THE STUPID !
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 18:25 - 24 Apr 2014    Post subject: Re: Wide tool cabinets Reply with quote

Can you go second hand?

You can get MAC ones that size.

There's also some similarly sized new ones on ebay from no-name places for not quite as silly money.
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 18:26 - 24 Apr 2014    Post subject: Reply with quote

Couldn't you bolt two or three, narrower cabinets together?
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Coxyzxr
Brolly Dolly



Joined: 22 May 2008
Karma :

PostPosted: 18:26 - 24 Apr 2014    Post subject: Re: Wide tool cabinets Reply with quote

G wrote:
Can you go second hand?

You can get MAC ones that size.

There's also some similarly sized new ones on ebay from no-name places for not quite as silly money.


Hi G,

Would happily go second hand, where can I get MAC stuff? Van doesn't visit our place.
____________________
**WAS FITTED "WRONG WAY ROUND" !** CANT ACCOUNT FOR THE STUPID !
 Back to top
View user's profile Send private message You must be logged in to rate posts

Coxyzxr
Brolly Dolly



Joined: 22 May 2008
Karma :

PostPosted: 18:28 - 24 Apr 2014    Post subject: Reply with quote

stinkwheel wrote:
Couldn't you bolt two or three, narrower cabinets together?


Have thought about this - I'm nearing that point but it's a bit of hassle.

What I would like to do is still a worktop on the top of a wide cab. Just finding a wide cab,
____________________
**WAS FITTED "WRONG WAY ROUND" !** CANT ACCOUNT FOR THE STUPID !
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 18:35 - 24 Apr 2014    Post subject: Reply with quote

Coxyzxr wrote:
stinkwheel wrote:
Couldn't you bolt two or three, narrower cabinets together?


Have thought about this - I'm nearing that point but it's a bit of hassle.


I'd envisioned joining them at the captive bolts for the handle then making two rectangular plates with holes in to link adjacent wheel mounting points.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 18:37 - 24 Apr 2014    Post subject: Re: Wide tool cabinets Reply with quote

You could try googling for 'MAC' Wink.
But I'd stick to ebay and so on personally.

www.ebay.co.uk/itm/201069326910

Can often find secondhand deals including big sets of tools for pretty reasonable prices as people are retiring etc.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fisty
Super Spammer



Joined: 11 Apr 2007
Karma :

PostPosted: 19:37 - 24 Apr 2014    Post subject: Reply with quote

Lad at work has the one G posted in red, it;s nice but feels flimsy.


I just sold a 78" wide snap on box with a maple top for less than that tho! Keep an eye on ebay.
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Llama-Farmer
World Chat Champion



Joined: 23 Jan 2012
Karma :

PostPosted: 20:52 - 24 Apr 2014    Post subject: Reply with quote

I'd be cautious about getting a nameless/brandless one from ebay... you have no idea where it's come from (probably china) and probably made with vastly inferior materials.

What good is it saving a few hundred quid if after a year or two all the ball bearing rollers are seized and the thing is rusting.
____________________
Current Bike: 1999 Honda CB600 FX Hornet
Next Bike: I want a CBR-RR. And I want an F800 GS-A. And a VFR 800. Can I have all 3?
Dream Bikes: Honda VFR750R RC30, Honda NSR500, Ducati 996 R
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 21:24 - 24 Apr 2014    Post subject: Reply with quote

LlamaFarmer wrote:
I'd be cautious about getting a nameless/brandless one from ebay... you have no idea where it's come from (probably china) and probably made with vastly inferior materials.

What good is it saving a few hundred quid if after a year or two all the ball bearing rollers are seized and the thing is rusting.


What makes you think the name brand boxes aren't made in China? saving several thousand pounds on a single box buys a hell of a lot of bearings.

The boxes that seem to be considered the best value for money at the moment are the 'US PRO TOOL' boxes which are sold under many names. Have a look here for the range and they offer 0% finance over 6 months. They even do a 72" wide cabinet.
If I was to buy from them I would spend a day and go to their shop in Cambridge just to make sure of what I was buying, in your case might be worth getting a £30 travelodge room as it could save you thousands of pounds in the long run. Keep in mind if they are decent they will retain their value for years.

Thing about tools and tool boxes these days is that good quality ones can be bought cheaply, you just need to look around at all the options.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Llama-Farmer
World Chat Champion



Joined: 23 Jan 2012
Karma :

PostPosted: 11:53 - 25 Apr 2014    Post subject: Reply with quote

sickpup wrote:
LlamaFarmer wrote:
I'd be cautious about getting a nameless/brandless one from ebay... you have no idea where it's come from (probably china) and probably made with vastly inferior materials.

What good is it saving a few hundred quid if after a year or two all the ball bearing rollers are seized and the thing is rusting.


What makes you think the name brand boxes aren't made in China? saving several thousand pounds on a single box buys a hell of a lot of bearings.

The boxes that seem to be considered the best value for money at the moment are the 'US PRO TOOL' boxes which are sold under many names. Have a look here for the range and they offer 0% finance over 6 months. They even do a 72" wide cabinet.
If I was to buy from them I would spend a day and go to their shop in Cambridge just to make sure of what I was buying, in your case might be worth getting a £30 travelodge room as it could save you thousands of pounds in the long run. Keep in mind if they are decent they will retain their value for years.

Thing about tools and tool boxes these days is that good quality ones can be bought cheaply, you just need to look around at all the options.


I'm sure name brand boxes are built in china, possibly even on the same production line. But I doubt they would use the cheapest of the cheap materials.

I've seen it in car patent parts, tools, electronics and many other things... you can have identical looking name-brand and non-brand things, but they're built with different standard materials or in a slightly different way and the non-brand often deteriorates beyond usable standard whilst the name-brand remains in virtually new condition
____________________
Current Bike: 1999 Honda CB600 FX Hornet
Next Bike: I want a CBR-RR. And I want an F800 GS-A. And a VFR 800. Can I have all 3?
Dream Bikes: Honda VFR750R RC30, Honda NSR500, Ducati 996 R
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 13:13 - 25 Apr 2014    Post subject: Reply with quote

LlamaFarmer wrote:
I'm sure name brand boxes are built in china, possibly even on the same production line. But I doubt they would use the cheapest of the cheap materials.

I've seen it in car patent parts, tools, electronics and many other things... you can have identical looking name-brand and non-brand things, but they're built with different standard materials or in a slightly different way and the non-brand often deteriorates beyond usable standard whilst the name-brand remains in virtually new condition


It's all a question of perspective.

Here we have a new Snap On roller cab bottom unit. $4885.00 + sales tax or in the uk about £3000+VAT.

Here we have a 4 piece box set which weighs in total 268 kilos so rather a lot of steel for £1175, cheaper on Ebay at £935.

I'm not saying the cheaper box is as good or better but I will probably be buying one after going to take a look as at 1/4 the price it certainly appears to be a bargain.

Considering my Clarke boxes have lasted over 15 years including many years of heavy usage and they are only old style HD friction slide boxes any boxes of decent condition can and will last a lifetime, there is no longer any need to buy Snap on boxes.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Coxyzxr
Brolly Dolly



Joined: 22 May 2008
Karma :

PostPosted: 17:24 - 26 Apr 2014    Post subject: Reply with quote

sickpup wrote:
LlamaFarmer wrote:
I'd be cautious about getting a nameless/brandless one from ebay... you have no idea where it's come from (probably china) and probably made with vastly inferior materials.

What good is it saving a few hundred quid if after a year or two all the ball bearing rollers are seized and the thing is rusting.


What makes you think the name brand boxes aren't made in China? saving several thousand pounds on a single box buys a hell of a lot of bearings.

The boxes that seem to be considered the best value for money at the moment are the 'US PRO TOOL' boxes which are sold under many names. Have a look here for the range and they offer 0% finance over 6 months. They even do a 72" wide cabinet.
If I was to buy from them I would spend a day and go to their shop in Cambridge just to make sure of what I was buying, in your case might be worth getting a £30 travelodge room as it could save you thousands of pounds in the long run. Keep in mind if they are decent they will retain their value for years.

Thing about tools and tool boxes these days is that good quality ones can be bought cheaply, you just need to look around at all the options.


I've actually got one of the US Pro, this exact one as I won the auction, https://www.ebay.co.uk/itm/400676180700?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Honestly I wasn't impressed with the quality of the drawers and the bearing action, drawers are quite flimsy, bearing action is light but almost cheaply light, if that makes sense. I was going to buy the top box from them but went and got a Halfords Pro one instead and whilst the Halfords quality is "realistic" for the price is still a fair bit better than the US pro one.

In fact if Halfords industrial did a wide enough cab I'd buy it.

I'm going to hold out for a second user snap on one, £1000 budget or continue searching for cheaper but fairly produced NEW alternative.
____________________
**WAS FITTED "WRONG WAY ROUND" !** CANT ACCOUNT FOR THE STUPID !
 Back to top
View user's profile Send private message You must be logged in to rate posts

suburban myth
Spanner Monkey



Joined: 13 Feb 2013
Karma :

PostPosted: 19:26 - 26 Apr 2014    Post subject: Re: Wide tool cabinets Reply with quote

Coxyzxr wrote:
where can I get MAC stuff? Van doesn't visit our place.


https://www.mactools.co.uk/Product/Where-to-buy/

Give your local rep a call. Sniff of a tool box sale, he'll be there tomorrow (or the day after).
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 208 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.4 - MySQL Queries: 13 - Page Size: 88.99 Kb