HJC helmet press fastener broken - can you get replacements?

[djrikki]

https://i.imgur.com/in2Ynu8.jpg

Little press fastener broke on my HJC, I know its not a necessity but wondering if you can get replacement bits. Looked on ebay and Googled but didnt turn much up.

Cheers!
____________________
CBF125 (Rusty Bin) -> CBR125R (WeeBR) -> Yamaha XJ6 Diversion F -> Suzuki GSXR750 L1 -> Suzuki GSXR750 L1 (Mark2)
CBT: 01/11/13 - Theory : 01/05/14 - Mod 1 : 11/05/14 - Mod 2 : 14/05/14 - Yam Div F : 16/05/14 - Gixxer : 02/04/2015-15/07/2015 RIP - GixxerMk2 : 16/08/2015

[chickenstrip]

Return it through the dealer you got it from and they can return it to the supplier to have a new popper put on.

[djrikki]

Only got one helmet and using it every day at the moment - bugger
____________________
CBF125 (Rusty Bin) -> CBR125R (WeeBR) -> Yamaha XJ6 Diversion F -> Suzuki GSXR750 L1 -> Suzuki GSXR750 L1 (Mark2)
CBT: 01/11/13 - Theory : 01/05/14 - Mod 1 : 11/05/14 - Mod 2 : 14/05/14 - Yam Div F : 16/05/14 - Gixxer : 02/04/2015-15/07/2015 RIP - GixxerMk2 : 16/08/2015

[chickenstrip]

The dealer can also request to have a new popper sent to him to possibly fit himself. Not sure if you need a press tool to do it securely though.

[Bubblin77]

Mines done the same, hate the feeling of 3 inches of flacid material hitting my chin!!

If you do get a fix let me know!
____________________
Kawasaki Z800 (SOLD)

[djrikki]

Cheers guys, Ive mailed HJC on facebook so will see if they reply or not. If not I'll call the dealer and ask them to request the bit. Apparently they are from Oxford in the UK so will contact them as well if no joy.
____________________
CBF125 (Rusty Bin) -> CBR125R (WeeBR) -> Yamaha XJ6 Diversion F -> Suzuki GSXR750 L1 -> Suzuki GSXR750 L1 (Mark2)
CBT: 01/11/13 - Theory : 01/05/14 - Mod 1 : 11/05/14 - Mod 2 : 14/05/14 - Yam Div F : 16/05/14 - Gixxer : 02/04/2015-15/07/2015 RIP - GixxerMk2 : 16/08/2015

[chickenstrip]

Speak to Helen at Customer Services, Oxford Products.

[Dave70]

You could try taking it along to a shop/place that sells dress making gear or does clothes alterations, as they would probably have the stud you need and the tool to fit it. I doubt they'd charge you much, if anything for fitting it for you.

[Mark65]

Most haberdashery or craft shops will have replacements you can use, I've repaired denim jeans and other items with buttons.

https://www.ebay.co.uk/itm/like/121185257886?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=m&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=108

https://www.amazon.co.uk/10MM-FABRIC-FASTENERS-POPPERS-PUNCH/sim/B0046Z36OM/2



Mark
____________________
07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650

[TUG]

[Shreeve]

[Mark65]

Err... I think I linked you to a resolution. , buy some attach them job done.
____________________
07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650

[Shreeve]

So you did
____________________
Current: Suzuki GSX650F (2010), Suzuki GSXR1000 K7, Suzuki GS250T (1980) currently restoring: Clicky.
Previous: Honda CBF 125 (2011), Suzuki GSXR750 K4

[djrikki]

Thanks folks.

Do all press fasteners have the same attachment couplings?
____________________
CBF125 (Rusty Bin) -> CBR125R (WeeBR) -> Yamaha XJ6 Diversion F -> Suzuki GSXR750 L1 -> Suzuki GSXR750 L1 (Mark2)
CBT: 01/11/13 - Theory : 01/05/14 - Mod 1 : 11/05/14 - Mod 2 : 14/05/14 - Yam Div F : 16/05/14 - Gixxer : 02/04/2015-15/07/2015 RIP - GixxerMk2 : 16/08/2015

[Mark65]

All the ones I've used have.
____________________
07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650

[djrikki]

Duvet cover says no

https://i.imgur.com/1EEjiZrl.jpg
____________________
CBF125 (Rusty Bin) -> CBR125R (WeeBR) -> Yamaha XJ6 Diversion F -> Suzuki GSXR750 L1 -> Suzuki GSXR750 L1 (Mark2)
CBT: 01/11/13 - Theory : 01/05/14 - Mod 1 : 11/05/14 - Mod 2 : 14/05/14 - Yam Div F : 16/05/14 - Gixxer : 02/04/2015-15/07/2015 RIP - GixxerMk2 : 16/08/2015

[Grimeric]

Pop down to your nearest Timpsons. They keep metal press studs in stock and will press one in for you for a couple of quid.