Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Rotor Puller for 1985 Honda CB125RS

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Tedwood
Two Stroke Sniffer



Joined: 08 May 2014
Karma :
PostPosted: 15:44 - 11 Jun 2014    Post subject: Rotor Puller for 1985 Honda CB125RS Reply with quote
Does anyone know where I could get one or information on how to make up one?

Thanks
 Back to top
View user's profile Send private message You must be logged in to rate posts

yen_powell
World Chat Champion



Joined: 22 Jun 2008
Karma :
PostPosted: 16:37 - 11 Jun 2014    Post subject: Reply with quote
Try using your rear axle.
____________________
Blackmail is a nasty word........but not as nasty as phlegm!
XT1200Z and a DR350 in bits
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :
PostPosted: 16:45 - 11 Jun 2014    Post subject: Reply with quote
Rear wheel spindle won't work unless it has an M27x1.0 reverse pitch thread on it. I'm fairly confident it does not.

Try Honda part number: 079330010000

From David Silvers by post or from any high street Honda dealer if you can manage to persuade them to order you something from a part number instead of argue with you about wether you want it. Should come in at £10 -15 before they also add in sucking of teeth and unhelpful and ill-informed comments on their assumeption about the price of one.

It is the actual tool for the job and well worth a tenner.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tedwood
Two Stroke Sniffer



Joined: 08 May 2014
Karma :
PostPosted: 12:57 - 12 Jun 2014    Post subject: Reply with quote
stinkwheel wrote:
Rear wheel spindle won't work unless it has an M27x1.0 reverse pitch thread on it. I'm fairly confident it does not.

Try Honda part number: 079330010000

From David Silvers by post or from any high street Honda dealer if you can manage to persuade them to order you something from a part number instead of argue with you about wether you want it. Should come in at £10 -15 before they also add in sucking of teeth and unhelpful and ill-informed comments on their assumeption about the price of one.

It is the actual tool for the job and well worth a tenner.


Many thanks stinkwheel, I've ordered one from my local dealer, was very helpful! Should take 1/2 days to get in.

I've also ordered a woodruff key as the rotor has not been installed correctly ie timing marks wrong, when turned to TDC it's NOT TDC! some 40/45 degrees out!

Either some wally has fitted the rotor without the woodruff key or it's been torn out. Hopefully, the former, will find out very soon.

Thanks again
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tedwood
Two Stroke Sniffer



Joined: 08 May 2014
Karma :
PostPosted: 13:21 - 21 Jun 2014    Post subject: Reply with quote
stinkwheel wrote:
Rear wheel spindle won't work unless it has an M27x1.0 reverse pitch thread on it. I'm fairly confident it does not.

Try Honda part number: 079330010000

Unfortunately, the puller suggested by stinkwheel is not the one for my bike.

Found out that the Honda puller is 07933-KG2-000 (previously 07933-4300000). Dealer estimated delivery August! Searched the web and found a post on another forum by Dave Wilkins cross referencing that part number with pattern part H-Level 793628.

He's fairly close to me and he had the H-Level one in stock, so popped over and picked it up. Cost £17 and now the rotor is off at last.

For information the puller has a 28 x 1.0 internal rh thread.
 Back to top
View user's profile Send private message You must be logged in to rate posts

davebike
World Chat Champion



Joined: 15 Nov 2013
Karma :
PostPosted: 20:15 - 21 Jun 2014    Post subject: Reply with quote
Hi Ted

Glad it is sorted

Dave
____________________
Dave
NC750Xdct + others at work !
davebike1@gmail.com
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 276 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 1.34 - MySQL Queries: 13 - Page Size: 49.01 Kb