Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Changing career, talk to me about engineering

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF... Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

Pie-Roe
World Chat Champion



Joined: 05 Feb 2007
Karma :

PostPosted: 17:47 - 29 Jun 2014    Post subject: Changing career, talk to me about engineering Reply with quote

Hey, so basically, after my crash last year, I've started to develop chronic pain and arthriticness in my foot.
As a chef, this is problematic as I can't work the 60+ hours a week without pain and swelling etc.

So I'm going to go and retrain to do something else, either something vocational that will get a foot into another industry shortly, or go the full length and get a degree.

So engineering seems like something that is always in demand, fairly hands on and the graduate and non graduate employment rates are pretty high.

Other info:
I'm 23 (24 at the start of academic year)
I have no qualifications other than GSCEs, and some catering based ones.
I will need to work part time if I'm at college, as I can't move 'home'

Cheers in advance.
____________________
Previous: GSF600, FZR600 x2, ZXR750, XT600 Tenere, CB125, CZ125, ETZ 250, ER5, CCM R30, DRZ400, RF600x4, RF900x2, GS500, VTR1000F, 640 SMC, CB250 NIGHTHAWK, GT550x3, GPX750 TE610, CB500, X11x2, SV650, ZING 125, TL1000R,CB250 Superdream, CBR1100XX
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 18:06 - 29 Jun 2014    Post subject: Re: Changing career, talk to me about engineering Reply with quote

Absolutely no help whatsoever but...

Pyro. wrote:
I'm 23


Shocked
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :

PostPosted: 18:35 - 29 Jun 2014    Post subject: Reply with quote

Engineering? Well, I was at Faculty of Civil Engineering and I could not pass through the descriptive geometry. Other subjects, and especially projects, ate all my time. I failed hard after second semester. Not everyone is capable of engineering. Now, I'm at law faculty and I've got so much free time, yet passing one exam after another with no bigger problems, just done 6th semester, having my final exams in 2 months, to get the bc. degree.

TL; DR, for most of the people engineering is very difficult and very time consuming. I know it's cool to be an engineer at something, but the road to that goal is not easy. I'd try to look at some tests and projects and decide yourself if you are capable enough. Catering school is not even a bad basis for the study of engineering, in fact it is nothing therefore wasted time if you really want to be an engineer.

Get the curriculum, sit on your arse and teach yourself before you go to an faculty of engineering. There are entry tests anyway.
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

duhawkz
World Chat Champion



Joined: 03 Dec 2006
Karma :

PostPosted: 19:02 - 29 Jun 2014    Post subject: Reply with quote

Didn't Cansa sack off working in IT to train as an engineer not so long ago.

Might we worth dropping him a PM.
____________________
"The guy is a worthless cunt and I honestly believe I would be a slightly happier person if he died." - Chris-Red
 Back to top
View user's profile Send private message You must be logged in to rate posts

Aff
World Chat Champion



Joined: 05 May 2011
Karma :

PostPosted: 19:10 - 29 Jun 2014    Post subject: Reply with quote

It's worth trying to get somewhere to take you on as an Apprentice. I've said it on here before, I think that generates some of the most useful Engineers.

What sort of Engineering you interested in? Its a pretty broad field.
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 19:22 - 29 Jun 2014    Post subject: Reply with quote

What sort of engineering are yiu looking at doing ? Just saying engineering is massively broad.

I did 2 years of civil engineering at college and I've just finished year 2 at uni doing civil engineering as well so could give more detailed info on that if it's relevant ? Can show you the sort of stuff we do at uni

It's not easy, depends what your strengths are thiugh, im very good at maths so get on well as I can pick up new maths things easily. I know a lot of people who aren't as confident and find it harder, it's reflected in their grades too

Basically 90 % of it is maths so make sure your confident with it, it gets progressively harder at a fast pace
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

carvell
Scuttler



Joined: 05 Sep 2003
Karma :

PostPosted: 19:33 - 29 Jun 2014    Post subject: Reply with quote

I've been an Electronic Engineer (specifically an RF Engineer) for 6 years.

You'll need a degree really, whether you get that through getting a company to sponsor you or you do one off your own back is up to you, but in my opinion you will need one. Obviously make sure it's relevant..! e.g. an Electronic Engineering degree if you want to be an Electronic Engineer. Without a-levels you'll need to do an HND/HNC or something first, or alternatively a levels in Maths, and some sciences.

As other people have said, 'engineering' is so, so broad. In order to succeed you need to go into a field that you are interested in. What are you interested in? Bridges? Electronics? Metalwork?
____________________
Yamaha TDM 850
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Itchy
Super Spammer



Joined: 07 Apr 2005
Karma :

PostPosted: 20:30 - 29 Jun 2014    Post subject: Reply with quote

Spin a good spiel?

https://www.youtube.com/watch?v=M0_DPXgDJ10

TL:DR Germany's Delayed Airport hired a fake engineer.
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Charlie
World Chat Champion



Joined: 27 May 2007
Karma :

PostPosted: 20:42 - 29 Jun 2014    Post subject: Reply with quote

You'll definitely want to do an a-level in Maths before doing an engineering degree. A traditional engineering degree is quite maths intensive. Chances are you won't use it all again but you gain an appreciation for the beauty of mathematics.

Good luck!
____________________
Past: Honda x8rs, Honda City fly, Honda Hornet 250, Honda VFR750, Yamaha xt600e.
Current: Honda CBR929RR & Yamaha XT660Z Tenere
 Back to top
View user's profile Send private message You must be logged in to rate posts

Sload
World Chat Champion



Joined: 28 Aug 2011
Karma :

PostPosted: 20:45 - 29 Jun 2014    Post subject: Reply with quote

As above, it's time consuming to get the quals and not overly paid well in the UK. It is also very broad so choose well. My other concern would be at the hands on level, if you cant handle the kitchen then you will struggle on tools.

As a boon to you, I started my app at 23 Wink
____________________
Honda Varadero >> Triumph Speed Four >> Honda CBR1100xx
 Back to top
View user's profile Send private message You must be logged in to rate posts

Lord Percy
World Chat Champion



Joined: 03 Aug 2012
Karma :

PostPosted: 21:15 - 29 Jun 2014    Post subject: Reply with quote

All I can add to this is that 23 is still young enough, in my opinion.

I taught myself A-level maths and physics at 24 years old and am now doing theoretical physics at uni.

For engineering you'll just need to do maths A-level, presumably with mechanics as the extra modules. (Probably C1, C2, C3, C4, M1 and M2 altogether).

So you'll need to teach the A-level to yourself or enrol on a college course.
 Back to top
View user's profile Send private message You must be logged in to rate posts

WindyMiller
Scooby Slapper



Joined: 02 Nov 2011
Karma :

PostPosted: 21:58 - 29 Jun 2014    Post subject: Reply with quote

carvell wrote:
I've been an Electronic Engineer (specifically an RF Engineer) for 6 years.


I'm also an RF engineer (15 years, so I win).

Engineering is just design and problem solving (repeat until death). Wikipedia can give you an idea of how many fields engineers can work in. As others have said, "I want to do engineering" is not far different to "I want a degree" or "I want a job" ---- doing what?

Whatever it is, you will need maths (a good A-level or equivalent) and you will need to like proper beer. Beards are optional.
____________________
YBR125 SV650S Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pie-Roe
World Chat Champion



Joined: 05 Feb 2007
Karma :

PostPosted: 23:36 - 29 Jun 2014    Post subject: Reply with quote

Sorry, I forgot to say, I have had a look at the roles and specialism etc. Civil or design engineering are what interests me. I've only really got this news the last 5 days and I'm working my 60 hour main job plus a 12 hour topup shift to help a mate out so I'm pretty knackered.
I acheived pretty well in the first half of as level before I decided to stop going to school (A in biology, chemistry, psychology and physics) so I'd like to think I could cope with learning a decent level of maths.

I'm going to ring a lot of uni's and colleges tomorrow and see what entry requirements match up for courses and whatnot.

Part of me is really depressed about this whole scenario due to being at a prety decent level and working hard to get there now, only to have to start again at the bottom, so I really want to find something, get into it and get working to catch up asap.
____________________
Previous: GSF600, FZR600 x2, ZXR750, XT600 Tenere, CB125, CZ125, ETZ 250, ER5, CCM R30, DRZ400, RF600x4, RF900x2, GS500, VTR1000F, 640 SMC, CB250 NIGHTHAWK, GT550x3, GPX750 TE610, CB500, X11x2, SV650, ZING 125, TL1000R,CB250 Superdream, CBR1100XX
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 23:56 - 29 Jun 2014    Post subject: Reply with quote

Go for civils then mate, you'll love it

Entry requirements vary massively on what uni you go to, but so does the quality if your degree. Make sure you go to one with a reasonable reputation and facilities for engineering

If you want any info on the sort of work you'll be doing just let me know ill fish some stuff out

At my uni there is around 100 people in each year and around 40 are mature students, so plenty of people do it, your not the only one
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Robby
Dirty Old Man



Joined: 16 May 2002
Karma :

PostPosted: 06:52 - 30 Jun 2014    Post subject: Reply with quote

Once you work out what sort of engineering you're interested it, find some people that do that job and talk to them about it. Worth going along to a trade fair too - there will be something on at either Earls Court, Olympia or the Excel. Trade fairs are good because they have a mix of big companies, small companies, suppliers and recruiters. They're always interested in talking to people that are thinking of getting into the industry. You'll also be able to get an idea of areas that are easier to get in to - I would assume that getting into any kind of car or motorsport related role is difficult, because every 17 year old that can service their Corsa wants to do it.

There are jobs that carry the title "Engineer" without requiring a degree. Some are just mechanics, some are a bit more interesting. I know Marjay is a Broadcase Engineer, but he doesn't have a degree, and got his initial job in the industry by showing that he understood how mechanical things work whilst still having enough social skills to be allowed to meet customers.

Engineering is a huge field. The UK has always been good at it, and it's currently a growth sector with a lot of Govt support, particular for small and medium companies. Not all of these companies are just hiring time served engineers or fresh graduates, some are will to take a bit more risk and employ people with the right sort of brain. In many cases, their work is so specialised that any new employee is going to need a fair of training before they become profitable anyway.

Off the top of my head, you known kitchens. Kitchens are full of expensive machines, and those expensive machines can be found in every kitchen in every town on the planet. See if you can get a job with a company that designs and builds kitchen equipment. This could be anything from the multinational that makes really impressive ovens, right down to the small company that specialises in knife blades, hose pipe, thermostats or timers.

With the right company, a person who knows how their product will be used and abused and can put that knowledge to use is more valuable than a freshly minted engineering graduate.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pie-Roe
World Chat Champion



Joined: 05 Feb 2007
Karma :

PostPosted: 10:47 - 30 Jun 2014    Post subject: Reply with quote

How did you teach yourself A level maths Percy? As in assessments etc?
There is nowhere around here that does an access course that has anything to do with maths. I do not currently have funds available to move somewhere that does. They do however have a course that is 12 hours of contact time based in sciences. The 5 universities I rang that accept access courses all said they would accept that plus a maths qual for civil engineering.

Being that I'm half Scottish and have a bank account registered to a Scotch address with statements and movement there, if I could get onto a free one up there I would go for that, if the course was any good.

I've also spent the last 10 hours googling different apprenticeship/trainee roles, and written to various food equipment manufacturers, that's a good observation robby cheers.

There's a lot of stuff about online about working for Balford Beatty or Bam Nuttall as a starting point to earn money and get a HND after 3-4 years, but how useful is that in the real world? Would it be better to do that and get practical experience than spend 5 years getting a degree?

I know it seems a little frantic on my part at the moment, but I'd like to get something sorted educationally for September, as otherwise it's another year of going through the motions as it were.
____________________
Previous: GSF600, FZR600 x2, ZXR750, XT600 Tenere, CB125, CZ125, ETZ 250, ER5, CCM R30, DRZ400, RF600x4, RF900x2, GS500, VTR1000F, 640 SMC, CB250 NIGHTHAWK, GT550x3, GPX750 TE610, CB500, X11x2, SV650, ZING 125, TL1000R,CB250 Superdream, CBR1100XX
 Back to top
View user's profile Send private message You must be logged in to rate posts

ijmok
Borekit Bruiser



Joined: 07 Sep 2012
Karma :

PostPosted: 11:08 - 30 Jun 2014    Post subject: Reply with quote

6 months ago i couldn't spell engineer, now i are one!

Either way an Apprentice is the way to go if you can get one, often potential for further education as well if you choose well,

I'm just looking to start topping up my HNC into a degree in the next year or so all of it funded by work Razz

Work can be challenging and requires focus and commitment, but nothing that a strong commitment and basic understanding of maths can help,

General hours are sociable, often Friday is a half day, and pay is often not bad, even if it can be a little singey in the apprentice stage, but i was never on less than normal NMW as an apprentice.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Aff
World Chat Champion



Joined: 05 May 2011
Karma :

PostPosted: 11:14 - 30 Jun 2014    Post subject: Reply with quote

Pyro. wrote:
How did you teach yourself A level maths Percy? As in assessments etc?


There are lots of places online that will send you out the material and give long distance support for A levels, similar to the OU. You then enroll on the exams at a local school/college.

I would recommend the experience then qualifications route if possible, but I am biased as that's what I've done.
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project
 Back to top
View user's profile Send private message You must be logged in to rate posts

lihp
World Chat Champion



Joined: 22 Sep 2010
Karma :

PostPosted: 12:24 - 30 Jun 2014    Post subject: Reply with quote

Try this link to see if you're knowledge level is ready for university level maths.

https://students.open.ac.uk/openmark/mst124.ayrf/
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 12:34 - 30 Jun 2014    Post subject: Reply with quote

PhilDawson8270 wrote:
Try this link to see if you're knowledge level is ready for university level maths.

https://students.open.ac.uk/openmark/mst124.ayrf/


First question..

Code:
Find the value of the expression
c(c − d) + cd − d3
when c = −2  and  d = −4.
c(c − d) + cd − d3 =


Nope, I'm definitely not ready.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Lord Percy
World Chat Champion



Joined: 03 Aug 2012
Karma :

PostPosted: 12:50 - 30 Jun 2014    Post subject: Reply with quote

Pyro. wrote:
How did you teach yourself A level maths Percy? As in assessments etc?

----

I know it seems a little frantic on my part at the moment, but I'd like to get something sorted educationally for September, as otherwise it's another year of going through the motions as it were.


In short, I signed up to a distance learning provider but it was a shit waste of money so I ditched their stuff and taught myself solo from the AQA maths textbooks instead.

For exams I just found a local college and asked if I could enter as an external candidate. List of AQA exam centres here: Linky.

---

There's easily time to get sorted into some kind of educational route before September. You can either:

- Start self-teaching the A-level maths. It's supposed to take 2 years but if you get your hands on the books immediately and go through it quite intensively, you could manage it in one. I think I did it all in about 15 months. The bonus with this option is that you can still work a normal job around it and can study at your own pace. You'd have to put in a lot to get it done in good time though. I think I was doing at least a couple of hours each day. I'm a slow worker and a major procrastinator though.

Or:

- Find universities who do foundation or access courses. You'd have to give up working altogether and become a student again, but you do of course get all the government loans etc. However Access/Foundation courses are often only geared towards the uni you're studying at, and are often not accepted by other unis if you want to go elsewhere. A-level maths gives you a much broader amount of opportunity.

----

If you do take the self-teaching A-level route, you'll need:

AQA Pure Core 1&2
AQA Pure Core 3&4
Bostock and Chandler Mechanics and Probability

I'd be more than happy to tell you all the relevant bits that you'd need to learn (specially in the mechanics book as a lot of the material isn't required for the AQA exam syllabus).

Also I'd be more than happy to help you out if you were to get stuck on any new material. Just don't pay for a tutor or distance learning provider because it really isn't necessary.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pie-Roe
World Chat Champion



Joined: 05 Feb 2007
Karma :

PostPosted: 13:04 - 30 Jun 2014    Post subject: Reply with quote

Lord Percy wrote:


- Start self-teaching the A-level maths. It's supposed to take 2 years but if you get your hands on the books immediately and go through it quite intensively, you could manage it in one. I think I did it all in about 15 months. The bonus with this option is that you can still work a normal job around it and can study at your own pace. You'd have to put in a lot to get it done in good time though. I think I was doing at least a couple of hours each day. I'm a slow worker and a major procrastinator though.

Or:

- Find universities who do foundation or access courses. You'd have to give up working altogether and become a student again, but you do of course get all the government loans etc. However Access/Foundation courses are often only geared towards the uni you're studying at, and are often not accepted by other unis if you want to go elsewhere. A-level maths gives you a much broader amount of opportunity.

----

If you do take the self-teaching A-level route, you'll need:

AQA Pure Core 1&2
AQA Pure Core 3&4
Bostock and Chandler Mechanics and Probability

I'd be more than happy to tell you all the relevant bits that you'd need to learn (specially in the mechanics book as a lot of the material isn't required for the AQA exam syllabus).

Also I'd be more than happy to help you out if you were to get stuck on any new material. Just don't pay for a tutor or distance learning provider because it really isn't necessary.


Cheers for that. Ideally I'd like to do an access in sciences at a local college and do A level maths concurrently, but I don't know how feasible that is really. All of the uni admissions places I spoke to say they'd be happy to take an access and an a level in maths, even ones that don't say they take access. I don't know how easy it would be for me to study two separate things and work part time though, but I'll give it a go.
____________________
Previous: GSF600, FZR600 x2, ZXR750, XT600 Tenere, CB125, CZ125, ETZ 250, ER5, CCM R30, DRZ400, RF600x4, RF900x2, GS500, VTR1000F, 640 SMC, CB250 NIGHTHAWK, GT550x3, GPX750 TE610, CB500, X11x2, SV650, ZING 125, TL1000R,CB250 Superdream, CBR1100XX
 Back to top
View user's profile Send private message You must be logged in to rate posts

Lord Percy
World Chat Champion



Joined: 03 Aug 2012
Karma :

PostPosted: 13:24 - 30 Jun 2014    Post subject: Reply with quote

Pyro. wrote:

Cheers for that. Ideally I'd like to do an access in sciences at a local college and do A level maths concurrently, but I don't know how feasible that is really.


I think it would be possible, although, as you said, it would be a real commitment to work full time around all that.

Also, it might be worth seeing what the science access courses are all about because some will loosely brush over everything, including biology and chemistry which you won't really need at all, so you might be better finding a more specific course. I wonder if there's an 'access to engineering' course?
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 16:54 - 30 Jun 2014    Post subject: Reply with quote

Paddy. wrote:
PhilDawson8270 wrote:
Try this link to see if you're knowledge level is ready for university level maths.

https://students.open.ac.uk/openmark/mst124.ayrf/


First question..

Code:
Find the value of the expression
c(c − d) + cd − d3
when c = −2  and  d = −4.
c(c − d) + cd − d3 =


Nope, I'm definitely not ready.


That's a really easy question, read it again and have a think, it's just testing BODMAS.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :

PostPosted: 17:10 - 30 Jun 2014    Post subject: Reply with quote

I used this back in the day https://www.wolframalpha.com/ to check stuff step by step.
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 141 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.09 Sec - Server Load: 0.55 - MySQL Queries: 13 - Page Size: 140.41 Kb