Where to buy crush exhaust gaskets?

[EazyDuz]

Where do you lot get yours from, or do you go OEM?
Suzuki dealer charges £8.50 per gasket. I've got others from EBay but they won't seal and compared to the OEM ones I took out, they're a lot lighter and thinner despite supposedly being for my bike. Its 61mm OD, 51mm ID and 4mm thick
____________________
To shreds you say? Tss tss tss

[Vincent]

It's only the outside diameter that makes a big difference, think I paid £3 for four on the VFR, the original Honda ones had nearly completely rusted away. I don't use the ones that look like brass curtain rings.
____________________
Space Is Deep

[Islander]

Wemoto. They do the copper toroid type (I prefer these) as well as the aluminium/mineral composite ones. Not expensive either.

[gavcarter]

I built a custom exhaust and forgot the gaskets had to go in when i did it, i couldnt get them in afterwards so I just used a fair bit of exhaust putty, seemed to work quite well