Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Water in my indicators

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

talkToTheHat
World Chat Champion



Joined: 21 Feb 2012
Karma :
PostPosted: 17:13 - 18 Sep 2014    Post subject: Water in my indicators Reply with quote
My indicators are big chrome lollipop like things on rubber stalks. I had an open circuit in the right rear, so I took the lens off, wrestled the bulb out and then took the left rear lens off, only to have a load of water pour out. Some pissing about later and the right started working again.

How would I go about sealing my indicators against such water ingress?

Is it safe to smear a little coppaslip on the bayonet socket to aid removal and prevent corrosion?
____________________
Bandit. does. everything.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :
PostPosted: 17:17 - 18 Sep 2014    Post subject: Reply with quote
I'd just drill a small hole in the bottom of the indicator. Any further water ingress will then just run out.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Copycat73
World Chat Champion



Joined: 11 Jan 2013
Karma :
PostPosted: 17:24 - 18 Sep 2014    Post subject: Reply with quote
talkToTheHat wrote:

Is it safe to smear a little coppaslip on the bayonet socket to aid removal and prevent corrosion?

yes.
Nobby the Bastard wrote:
I'd just drill a small hole in the bottom of the indicator. Any further water ingress will then just run out.

and this too.
____________________
Whatever I post I have no citation and no intention of providing one..
caveat emptor
 Back to top
View user's profile Send private message You must be logged in to rate posts

CG Sam
Crazy Courier



Joined: 08 Apr 2013
Karma :
PostPosted: 17:28 - 18 Sep 2014    Post subject: Reply with quote
Looking on CMNSL there should be some kind of gasket between the lens and the indicator housing. I know on the CM125 they have rubber ones, having had a problem with a rear indicator due to it being missing and water getting in.
____________________
CG125, SV650S, CBR600F, GSXR600 SRAD
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

talkToTheHat
World Chat Champion



Joined: 21 Feb 2012
Karma :
PostPosted: 17:54 - 18 Sep 2014    Post subject: Reply with quote
I have the gaskets in. Not sure if they seal perfectly. What isn't sealed is the inside of the indicator stalk, wondering if water sprayed at the fender runs down the indicator cables through the inside of said stalks.

Is there some kind of recommended sealant that won't bond so tight I can't get the indicators open ever again?

Will drill the two scummiest indicator bodies, am still trawling for reasonably priced replacements for the right hand side, but shuffling the two rights to the rear to experiment with drilling holes in the meantime is no further loss if I mess up. How big a hole, about 3 mm?
____________________
Bandit. does. everything.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Taught2BCauti...
World Chat Champion



Joined: 12 Jan 2012
Karma :
PostPosted: 18:04 - 18 Sep 2014    Post subject: Reply with quote
talkToTheHat wrote:
How big a hole, about 3 mm?

Big enough so it doesn't get blocked by crud that comes in with the water. You could also use clear silicon sealant on the cable entry.
____________________
Honda Varadero XL125(V8)
www.TheFutureIsHere.eu
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

CG Sam
Crazy Courier



Joined: 08 Apr 2013
Karma :
PostPosted: 18:19 - 18 Sep 2014    Post subject: Reply with quote
The quick cheap fix would be some aluminium tape, wouldn't show up to much against the chrome and just put it round the joint that you suspect is the problem. Wouldn't look great though, but should give an idea of if it is where the water is getting in.
____________________
CG125, SV650S, CBR600F, GSXR600 SRAD
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 28 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 1.17 - MySQL Queries: 13 - Page Size: 52.75 Kb