Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


why do fuse boxes have lids?

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Andyk
Borekit Bruiser



Joined: 17 Dec 2012
Karma :
PostPosted: 10:18 - 06 Oct 2014    Post subject: why do fuse boxes have lids? Reply with quote
ok this may be a dumb question but the fuse box on my bike is above the battery and yet still if fully enclosed with a lid? apart from the label which shows which fuse is which what is the purpose of it being fully enclosed?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

doggone
World Chat Champion



Joined: 20 May 2004
Karma :
PostPosted: 10:20 - 06 Oct 2014    Post subject: Reply with quote
Salty road spray gets everywhere and that won't do it much good inside after two or three winters?
 Back to top
View user's profile Send private message You must be logged in to rate posts

map
Mr Calendar



Joined: 14 Jun 2004
Karma :
PostPosted: 10:44 - 06 Oct 2014    Post subject: Re: why do fuse boxes have lids? Reply with quote
Andyk wrote:
...what is the purpose of it being fully enclosed?

It's to keep the lektric pixies nice and safe and warm.
These are not to be confused by the engine fairies that like to make stuff go bang.

...genuine insight into motor mechanics there. Ask anyone Wink
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger? Very Happy
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

iooi
Super Spammer



Joined: 14 Jan 2007
Karma :
PostPosted: 10:56 - 06 Oct 2014    Post subject: Re: why do fuse boxes have lids? Reply with quote
Andyk wrote:
what is the purpose of it being fully enclosed?



Water + electrics = Embarassed
____________________
Just because my bike was A DIVVY, does not mean i am......
 Back to top
View user's profile Send private message You must be logged in to rate posts

Andyk
Borekit Bruiser



Joined: 17 Dec 2012
Karma :
PostPosted: 11:21 - 06 Oct 2014    Post subject: Re: why do fuse boxes have lids? Reply with quote
iooi wrote:
Water + electrics = Embarassed


See thats what i thought but its right above the battery (in the same enclosure) which would mean that if the fuse box got wet the battery is soaked.... unless its a generic part they just fit? Confused
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 12:40 - 06 Oct 2014    Post subject: Re: why do fuse boxes have lids? Reply with quote
Andyk wrote:

See thats what i thought but its right above the battery (in the same enclosure) which would mean that if the fuse box got wet the battery is soaked.... unless its a generic part they just fit? Confused

There's a reason that bike batteries typically have the terminals a fair bit apart - often also with some plastic protection so a straight bit of metal can't short it out.

While in a fuse box you can still have a good few amps, but with the contacts very close to each other.
You've also got fuse terminals held in with friction, PCB underneath often - ideal places for corrosion to cause issues, vs a bolted on terminal with big connectors.
 Back to top
View user's profile Send private message You must be logged in to rate posts

weasley
World Chat Champion



Joined: 16 Oct 2010
Karma :
PostPosted: 12:41 - 06 Oct 2014    Post subject: Reply with quote
The terminals on a battery are so far apart that splashing with water is highly unlikely to lead to any shorting. With fuses, there is much greater chance of shorting across the fuse or to another circuit.
____________________
Yamaha XJ600 | Yamaha YZF600R Thundercat | KTM 990 SMT | BMW F900XR TE
 Back to top
View user's profile Send private message You must be logged in to rate posts

virus
World Chat Champion



Joined: 16 Aug 2006
Karma :
PostPosted: 17:22 - 06 Oct 2014    Post subject: Reply with quote
Its so that when the fusebox terminals are so worn from repeated replacement of fuses that they no longer keep the fuses in when riding, you can fill the lid out with blutack to make sure they stay in thanks to the lid clips. Embarassed Laughing



Cheers
John
____________________
own: 81 xs1100g...
owned: 85 rat CG (sold), 91 GS500e (stolen), 84 gsx400f (scrapped), 81 z250 (siezed, siezed, scrapped), 83 cb250rs (sold), 84 gpz750r ratfighter (killed) 84gpz400 (sold), '80 cb650 ratfighter (wrote off) 95gsx6/12f ratfighter (killed) 91 xj900 (sold)
stinkwheel Well I just had my hands up a pigs fanny. Which makes your concerns pale into insignificance.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

blackbosh
Nova Slayer



Joined: 07 Aug 2014
Karma :
PostPosted: 20:32 - 06 Oct 2014    Post subject: Reply with quote
I had to have a fuse box replaced under warranty because the lid er cough mustn't have been closed correctly at manufacture causing a lot off corrosion and dead electronics. No warning just clunk - stranded
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :
PostPosted: 20:43 - 06 Oct 2014    Post subject: Reply with quote
virus wrote:
Its so that when the fusebox terminals are so worn from repeated replacement of fuses that they no longer keep the fuses in when riding, you can fill the lid out with blutack to make sure they stay in thanks to the lid clips.
Spot the ratbiker Laughing
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 79 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 1.01 - MySQL Queries: 13 - Page Size: 66.83 Kb