What paint?

[Silver]

Have a look at the attached picture of the GSXR6 I've just bought. Anyone know what type of paint I need to use to reapply the black to the pipe that sits in front of the end can?

Thanks.

[BLOFLY 636]

here in australia we have a product used on high temperature surfaces it is basically a high temp paint I have seen some cars use it on there brake calipers and engine showy bits have a look down at an automotive accessorie shop
____________________
Those bloody footpegs......they ought to do away with em!

[Claud 14.7 to 1]

Tin of Halford high temp paint will do the trick. Has an exhaust manifold picture on the front.

I did the whole exhaust on mine early Winter. Really nice even matt black finish.

May need to stick a few coats on though, as I found 1 will not be enough to make a good layer.

[steve09]

halfrauds car shop sell it matt called erm very high tempretuar paint, its about 5 quid a can and its quite good stuff,, id get the rattle can as aposed to the pot of paint but just persnal prefrance,,
cheers
steve

[steve09]

dam Claud lol,
ur quicker than me
(thought id be all helpfal then and answer one of the few questions i know answer to hehe,)

[dotti]

I used a can of this stuff on my pipe with good effects:

https://www.nfauto.co.uk/images/march/exhaust_paint%20_cans.jpg
____________________
Dangerous traffic offences spotted on 50-minute trip: Lost count after 100. Number of traffic cops spotted: One, sitting by a speed-trap camera