Honda h100 g reg where does the pipe go from carb to oil bot

[richiemac]

Honda h100 g reg where does the pipe go from the 2 stroke mixture tank to the carb as there is 2 spaces for piping to go on 1 at the very bottom of the carb and 1 on the right side of the carb?

[stinkwheel]

The oil goes from the oil tank to the oil pump. Then a second pipe goes from the oil pump to a stub on the side of the carb near the inlet manifold.

You should prime and bleed any air out of the pump before running. There will be a procedure for this in the workshop manual.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[stickybackbob]

Having worked on a much older H100 (the 'A' model), the oil pump doesn't feed directly to the carb. There is a stub on the inlet manifold that connects to the pump. Not sure if it changed on later models

[richiemac]

where is the oil pump?