CBR125R Exhaust

[Ati]

New to forum, new to 4 stroke engines.
Got myself a CBR125R 61 plate. I am looking to buy a new exhaust but have few questions regarding bike sound/performance/setup.

Will any of these exhausts be good ?

https://www.ebay.co.uk/itm/Danmoto-Carbon-GP-Exhaust-Honda-CBR-125-2011-2016-11-16-EX782-/172036647959?hash=item280e2eec17:g:R18AAOSwZ1lWeLqx[/url]
https://www.ebay.co.uk/itm/Danmoto-XG-1-Exhaust-Honda-CBR-125-2011-2016-11-16-EX786-/151923962300?hash=item235f5fb1bc:g:LfUAAOSwhkRWeLo5
https://www.ebay.co.uk/itm/Danmoto-GP-Conical-Exhaust-Honda-CBR-125-2011-2016-11-16-EX784-/161924986998?hash=item25b37b3876:g:85IAAOSwNyFWeLsS

I am not looking to spend much, just to replace the really rusted standard exhaust. Few questions about these, is there any kind of remap needed after changing these?

Would it be better to buy a whole exhaust system, or maybe just the better end can, for example 'Arrow'? Not looking for performance gains here, just looks and "ok" sound.

Are these danmoto exhausts any good? Some of them do NOT sound good, states they are debaffled, will this be extremely loud? Can I make it quieter?

Thanks.[/url]

[charlie74]

personally I wouldn't touch any of those...

[Draco87]

As Charlie said I wouldn't touch those, as its a 125 you wouldn't really notice any performance increase and would just probably become a nuisance to the neighbourhood.

Try this https://www.wemoto.com/bikes/honda/cbr_125_r/14/

Hope it helps
____________________
1992 Yamaha SR125, 2005 Honda XR125, 1998 Yamaha XJ600S, 2000, 2004 Yamaha R6, 2002 Yamaha Fazer, 2004 Honda CBR

[Rogerborg]

https://www.bikechatforums.com/viewtopic.php?t=313209

tl;dr version: replace downpipe with Black Widow, retain the stock end can unless it's wrecked.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike

[Ati]

Not looking for performance, I can see they're bad exhausts, mine is fully rusted, including the downpipe.

What about the Black Widow exhausts?
https://www.ebay.co.uk/itm/CBR-125-CBR125R-2011-2015-EXHAUST-SYSTEM-230MM-OVAL-STAINLESS-STEEL-SILENCER-/131546435794?hash=item1ea0c750d2:g:Sk8AAOSwLVZVkVwO

[dydey90]

Are you taking the rusted old pipe off yourself?
If so, may the force be with you.
____________________
This post is probably not serious and shouldn't be taken literally.
Past: CBR125,ER6f NINJA 650, ZZR600 Current: VFR750

[CBRMAN94]

Any Danmoto can will be ear bleedingly loud, I speak from experience.

If it was mine, i'd fork out the extra few quid on a Venom system from Motard. Nice tone but not too loud.

As for taking the exhaust off yourself, proceed with caution. The CBR125 exhausts are notorious. If you some how manage to get the nuts off the studs without snapping them, the chances are the exhaust header has seized into the engine and are a nightmare to get out. Last one involved a bit of heat an a good amount of time with a Dremel!
____________________
Honda CBR-RW6 (Sold) - Kawasaki GPZ500s (Sold) - Honda CG125 (Project) - Honda CB750 Cafe racer (Project) - Yamaha FZR400RR

[Laamapalmu]

Maybe the black one, too bad these mufflers don't have an db killer in them. When changing the exhaust, remember to richen the fuel mixture and maybe change the air filter too, it will give a noticeable boost. And when running a bit rich you get nice bopping sounds

E: Saw the blackwidow, it'll be much better and has a db killer so you get a decent sound that isn't too loud.

[CBRMAN94]

[Laamapalmu]

[CBRMAN94]

Well clearly, You've got a 150cc kit on it... Hardly the same as a new exhaust is it?
____________________
Honda CBR-RW6 (Sold) - Kawasaki GPZ500s (Sold) - Honda CG125 (Project) - Honda CB750 Cafe racer (Project) - Yamaha FZR400RR

[Rogerborg]

[Laamapalmu]

[Laamapalmu]