Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Explain coil resistance to me.

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

lingeringstin...
Spanner Monkey



Joined: 01 May 2014
Karma :
PostPosted: 01:22 - 10 Sep 2017    Post subject: Explain coil resistance to me. Reply with quote
I've got a twin cylinder engine with a 360 crank. Both pistons up and down at the same time, alternate firing. It's got an AC feed off the alternator to the CDI box which feeds the coils. What I want to know is whether there's any difference running the two coils in series or parallel. The engine fires up and runs either way, but is there any reason why one way is better than the other?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 03:51 - 10 Sep 2017    Post subject: Re: Explain coil resistance to me. Reply with quote
lingeringstink wrote:
I've got a twin cylinder engine with a 360 crank. Both pistons up and down at the same time, alternate firing. It's got an AC feed off the alternator to the CDI box which feeds the coils. What I want to know is whether there's any difference running the two coils in series or parallel. The engine fires up and runs either way, but is there any reason why one way is better than the other?


If the standard is series, putting them in parallel will reduce the primary resistance and draw a fair bit more current through the igniter.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 06:09 - 10 Sep 2017    Post subject: Re: Explain coil resistance to me. Reply with quote
temeluchus wrote:
lingeringstink wrote:
I've got a twin cylinder engine with a 360 crank. Both pistons up and down at the same time, alternate firing. It's got an AC feed off the alternator to the CDI box which feeds the coils. What I want to know is whether there's any difference running the two coils in series or parallel. The engine fires up and runs either way, but is there any reason why one way is better than the other?


If the standard is series, putting them in parallel will reduce the primary resistance and draw a fair bit more current through the igniter.


It'll also cause the coils to run at double the voltage, using double the current. They'll get hot and die pretty quickly most likely.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Robby
Dirty Old Man



Joined: 16 May 2002
Karma :
PostPosted: 20:27 - 10 Sep 2017    Post subject: Reply with quote
Are you sure about the alternate firing? The standard setup would be to trigger the spark at the crank and use wasted spark ignition.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 20:42 - 10 Sep 2017    Post subject: Reply with quote
Not many bikes taking the trigger off the camshaft. CB100/125 single is one I recall, can't bring to mind any others.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

lingeringstin...
Spanner Monkey



Joined: 01 May 2014
Karma :
PostPosted: 22:31 - 10 Sep 2017    Post subject: Reply with quote
Robby wrote:
Are you sure about the alternate firing? The standard setup would be to trigger the spark at the crank and use wasted spark ignition.


Yeah, it's both pistons up and down at the same time but one is on the exhaust stroke while one is on the combustion and there is a wasted spark, and it's triggered off a coil in the alternator which is on the end of the crank. I like that because it's the best setup for single carb.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 22:40 - 10 Sep 2017    Post subject: Reply with quote
Why do you need two coils then? A single coil with twin outputs would suffice and it's still wasted spark.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

lingeringstin...
Spanner Monkey



Joined: 01 May 2014
Karma :
PostPosted: 01:10 - 12 Sep 2017    Post subject: Reply with quote
Pete. wrote:
Why do you need two coils then? A single coil with twin outputs would suffice and it's still wasted spark.



Ah, well you see I've got an assortment of random coils to use. At the moment I'm using a Yamaha Banshee 350 coil which is twin lead but I don't know how old and knackered it is. I've also got a pair of brand new Chinese CA250 coils which I suspect are common fodder on a lot of Honda clones of all sizes. But having never used Chinese coils I'm not wanting to rely upon them yet. I've also got a coil off a 50cc thing that looks pretty much just like a Chinese 250 coil in a different casing.

But the best spark I've had so far was from a couple of old car coils I rigged up just to see what would happen. Great spark but they're quite big coils and hard to locate somewhere, so at the moment I'm using the old twin lead Yamaha coil until I can rig something else up.

Anyway, I've got assorted coils and spark and the engine runs so I'm not that bothered.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 7 years, 311 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 2.04 - MySQL Queries: 13 - Page Size: 59.09 Kb