underseat exhaust for 2t

[killergibbo]

cud u do this make a pipe system for the 2t and design it to come under the seat and out to where the number is .....

if done what must u make sure of and that plus on the bottom of the pipe whats the big tube part of the system and whats this do and what wud happen if taken awa.....

once the pipe is made wen its done i will be puttin 2 arrow cans on the end as it will split into 2

i know this maybe a gay idea but i wanna do it cos i know how to make the pipe work and weld but its sumthin different to every1 else's bike

[G]

Knowing how to make pipe work and how to design a 2 stroke exhaust is a very, very different thing.
The 'bit at the bottom' is an 'expansion chamber', the design of this is very important for a 2 stroke to work properly.

I don't know if they do two strokes, but www.zorstec.com are relatively cheap.

If you really want to make your bike look different... paint it bright pink with dulux emultion.
People will stare at your bike and won't think you've got to much money .

[killergibbo]

ok so if i made a underseat exhaust wud i need to have the big thick tube of the pipe system there?? i take it i will

[DukeRed]

I'd comment but haven't got much idea what you're talking about.

Learn how to spell.
____________________
Enjoy Life There's Plenty of Time to be Dead
https://www.janoner.com

[Simonbt]

What we're trying to tell you is modifying the exhaust on a 2 stroke is like drilling holes in the cylinder head to try and make the bike lighter (dont try that btw )

The exhaust on a two stroke does most of the tuning for the engine. Try removing it an riding down the road..... (its not the same for 4 strokes thats why you can modify them easier)

If you want an underseat exhaust for you bike you will have to buy one that is made for the job and i doubt the kits will be cheap.