L Plate Warrior
Joined: 09 Jan 2020
|Posted: 22:49 - 09 Jan 2020 Post subject: TZR/TDR 250 Parts for sale
Having a major clear out of my garage (15 years worth of spares), As i'm leaving the 2 stroke world behind. To save you from multiple posts I've listed everything in this one single post:
Bold Items are sold:
1* Standard Spare barrels No powervalves, No pistons, Would ideally use a rebore but you may get away with just a hone. (1KT)
1* Standard Spare barrels No powervalves, No pistons. -THESE BARRELS HAVE DAMAGE TO THE BORES AND THE SEALING FACE. THESE WILL NEED REPAIRING AND A REBORE BEFORE USE. (1KT)
1* Standard gearbox, been stored for a long time (as I dont use) would have to check gearing I believe came from a 2ma.
1* Flywheel and stator (1KT/2MA)
Many Pistons, various different sizes decoked with rings, Usually only done about 6months running. Usually Mitaka or Gen Yamaha, more details upon request. (1KT)
0.5 oversize New pistons, Mitaka with rings (1KT)
1* Bored & Flowed Race carbs 31.5mm (Based on TM28SS) - SOLD
1* Bellmouths Set for the TZR 250 Bored & Flowed 31.5mm carbs, with the air jet modification done as mentioned in the F3 KIT manual. Also, with these I used a Flow commander, - which was basically like an adjustable jet The needles mentioned in the F3 KIT manual are also included in this kit. (Based on TM28SS) - SOLD
1* Slightly bored carb I believe these are about 29.5. (Based on TM28SS)
1* Standard set of carbs (providing I can find the face's) (TM28SS) -SOLD
1* Set standard 2XT carbs (TM28SS - HOWEVER these have the Changeable power jet and air jet) -SOLD
1* TZR 250 Powervalve Control box (1KT/2MA MODEL)
1* TZR 250 CDI (1KT/2MA MODEL)
2* TDR 250 CDIs
1* Mild Wide profile Tuned Engine Without Electronics Willing to split for the right price. (Stan Stevens)
- SPLIT ONLY CRANK LEFT
1* Top End Tuned Engine Without Electronics Willing to split for the right price. (Graham File)
Cases have been modified for use in a hovercraft so will be useless to you guys!
Thanks for reading!