Scorpion End Can, Evotech Hanger

[Mark65]

Hi All,
I have a dilemma, I put my scorpion end can on stock hanger and then I saw an Evotech hanger and bought that off Ebay as they not made any more, I didn't think at the time the hanger was designed for the stock exhaust and not a Scorpion.
I'm assuming the mounting point is different, any way I have two options one is to buy two 20mm stainless stand offs and mount between the frame and hanger and that gives a good 12-15mm clearance between the swingarm ang can ( i used nuts to try this spacing or use a 12mm spacing as shown in image and have the can on the outside of the hanger.
I really like the hanger and would prefer to keep it if possible.
Any thoughts if anyone has done this?.
Thanks
Mark
____________________
07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650

[Nobby the Bastard]

Do you have a hammer?
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050

[Mark65]

____________________
07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650