![](images/spacer.gif) A100man World Chat Champion
![](images/avatars/1652104702547c811d3c10a.png)
Joined: 19 Aug 2013 Karma : ![Excellent Karma (Level 2)](/images/karma/gold_9.gif) ![Excellent Karma (Level 2)](/images/karma/gold_9.gif) ![Excellent Karma (Level 2)](/images/karma/gold_8.gif)
|
![Post Post](templates/standard/images/icon_minipost.gif) Posted: 11:43 - 11 Jun 2024 Post subject: Coil impedance concerns - WD Forte et al? |
![](images/spacer.gif) |
|
OK so new XJ coils from Yellow Square arrive.. but some concerns.
mounting holes are 90mm not 100mm (but could be adapted ) and Primary impedance is 3.9 Ohm whereas factory spec demand 2.5 Ohms,
Supplier is suggesting this higher value won't damage the TCI (Ignitor) box and produces a better spark (secondary is also higher at 15KOhms vs 11KOhms factory.
My knowledge in this area is poor - what do the great BCF minds think?
Cheers ____________________ Now: A100, GT250A, XJ598, FZ750
Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600 |
|
![](images/spacer.gif) WD Forte World Chat Champion
![](images/avatars/212995274254555f81e3f77.jpg)
Joined: 17 Jun 2010 Karma : ![Excellent Karma (Level 2)](/images/karma/gold_9.gif) ![Excellent Karma (Level 2)](/images/karma/gold_9.gif) ![Excellent Karma (Level 2)](/images/karma/gold_5.gif)
|
|
![](images/spacer.gif) A100man World Chat Champion
![](images/avatars/1652104702547c811d3c10a.png)
Joined: 19 Aug 2013 Karma : ![Excellent Karma (Level 2)](/images/karma/gold_9.gif) ![Excellent Karma (Level 2)](/images/karma/gold_9.gif) ![Excellent Karma (Level 2)](/images/karma/gold_8.gif)
|
|