just put wheel decals on

[Bandito]

what do you think?!

I love it... looks a bit luminous as the flash went off, but it matches the red on the 'CBR' perfectly.

[TheShaggyDA]

Oddly, I quite like that
____________________
Current: CB500 Previous: CB100N, CB250RS, XJ900F, GT550, GPZ750R/1000RX, AJS M16, R100RT, Enfield Bullet

[i:6e3bfc7581]But still I fear and still I dare not laugh at the madman...[/i:6e3bfc7581]

[nick.h]

They are stickers? Look good
____________________
[Italjet MM5A] ll [Rieju RS1 Evolution] ll [Suzuki GS500e] ll [Suzuki GSX600F] ll [Honda CG125] ll [Pug Elyseo 125] ll [Yamaha YZF750R] ll [Yamaha Thunderace] ll [Yamaha R6] ll [Triumph 955i] ll [Hayabusa RZK3] ll [Suzuki RGV250] ll

[Bandito]

pretty much yeah... got them off a guy on ebay... its quite a stretchy plastic, need to be very patient in putting them on, but think they add a bit of character to the wheels..

[Lee_367]

I think they look good.
____________________
?It?s mercy, compassion, and forgiveness I lack?not rationality.?

[Keith]

Yeah, a from me too.

Gives the wheels, as you said, more character. Much better than just being black.
____________________
Aprilia RSV Mille R Edwards Replica - Aprilia RS250 - Suzuki GSXR600 Supersport Race Bike

[Section59]

Hey look, they even make go-faster stripes for your wheels now.

[Claud 14.7 to 1]

Defo like that.

Are they easy to fit, and easy to get a good looking result?

[Bandito]

yeah, simple enough to fit... would have been easier with a paddock stand..
It comes in four bits for each side of the wheel, so you do it in quarters... then slightly overlap as each new bit is added... its slightly stretchy too which makes it easy to guide around the wheel.

[plugger147]

top job look different without going to far.
do they do any other colour's?
____________________
Tristan the wrote: just whipped off my trousers to find a big bruise on my arse, caused by matt rear ending me...

[Stew]

Seen them crop up on ebay quite a bit recently.
Mine are painted on but yours look easily as good, and I suppose if you change your mind you can just peel them off again, or change colour.
https://i5.photobucket.com/albums/y195/Stewyzf750/exhaustfix/CA23QHYD.jpg
____________________
"Unlike public school you don't need to have your arse up and your head down to go a long way...."

[Bandito]

[numark1]

Look sweet.

Now what would go well with yellow?

[Flip]

I've seen these. Is there no chance of them coming off and wrapping around the spindle? Is the glue strong enough do you think?

[instigator]

Looks great

Funnily enough, I can imagine everyone slating you if you had put this on a small rs50 or something similar. Such is this board....

[mchaggis]

I should be very surprised if whatever glue they use would be unstuck very easily. The glue will be in shear so will be more difficult to dislodge too, rather than peeling off. Much less glue is trying to be torn in peeling than in shear, so peeling requires much less force. Hence, get the edges stuck down properly and you shouldn't have any trouble. The wind will catch the edges and make them peel if they aren't stuck properly too I should think.

The forces on the transfer will be trying to drive it radially away from the centre of the wheel, so they'd probably slip onto the tyre and get ripped off by the road rather than fall into the spindle. They'll be made of a thin weak plastic which would be unlikely to clog anything anyway.
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush.

[Bandito]

nice diagram!

[RealNinja]

[Raffles_Gentleman Thug]

My Gsxr has a custom paintjob and I added wheel decals.

the wheels, mirrirs and a few other parts are usually black - i prefer my new scheme!
____________________
"Is sir addressing me or is he masticating on a house brick? Because either way sir loses his teeth."

[dodsi]

Dude, that GSXR looks classy!

Thats what I would like my bike to look like if I owned something like that.

[Stew]