Power Valve for Aprilia RS 125!!! How Much???

[RS125_Tecky]

Hi just as the subject says, how much are they BRAND NEW???

Also anyone got any links to a site where there sold????

Been told there just a little over £350 from Aprilia is this right??

cheers

[Kickstart]

Hi

For everything that amount would not surprise me.

The bits would be:-
Power valve blade
Power valve gasket
Power valve housing
Return spring
O ring
Rubber boot
Cable
Split pin
Solonoid
Control unit

You really need to know which bits (if any) are already fitted to your bike. If you are really lucky then you will need no parts, worst case you could need all the above parts (and paying a dealer to fit them could add a fair bit more if the blanking plate has been in place for a while and is coked up).

Realistically to buy them new you will have to get them from Aprilia. You could also try PJ Engineering in Wolverhampton.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[RS125_Tecky]

yeah Keith i want the whole thing, i already have a power valve on my bike, i just want a complete new one, so the blanking plate is already off the bike.

cheers

[Kickstart]

Hi

Ouch, then that will cost you.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[TOM M]

andys motorycles in stoke area sell em complete for £60,
im yet to buy one
____________________
Now owner of a 1200 Bandit