Tyga Rossi Rep Honda vfr400 bodykits

gauloises · Scooby Slapper Joined: 12 Dec 2004 Karma :

Hi

Has anyone ever purchased anything from a company called TYGA.

Heres the website https://www.tyga-performance.com/tyga_400_project/400rossirep.php

Just needing to no what their bodykits are like and the delivery was the delivery good or bad. I think there based in America. And is there a company TYGA based in this country.

Has anyone seen there ROSSI REP Honda vfr400.

Cheers.

Thumbs Up

S.L
____________________
If you tell a lie long enough loud enough and often enough the people will believe it.

EuropeanNC30R... · Gay Hairdresser Joined: 20 Jun 2002 Karma :

Believe they are based in Thailand. I've heard some bad reports on the build quality of the fairings, a lot of people on 400greybike have had experience with them.

jayluvmito · Crazy Courier Joined: 15 May 2004 Karma :

Chr!S · Nitrous Nuisance Joined: 17 May 2005 Karma :

From what ive heard they are a very trust worthy company.

DynaMight · World Chat Champion Joined: 27 Oct 2004 Karma :

Lots of peeps have bought stuff from them over at 400GB, Mostly good responces I think, some bad as you would expect.

I'm pretty sure they are a couple of westerners that have setup shop over there, maybe wrong though.
____________________
My bikes are at https://www.bikepics.com/members/dynamight/

jayluvmito · Crazy Courier Joined: 15 May 2004 Karma :

The Tot · World Chat Champion Joined: 11 Jun 2004 Karma :

Have you ever been to thailand for that instance???

In all honesty, some of the bikes there, such as their equivalent to the CBR125 is sold for much cheaper and styled better. The same can be said about the NSR150 which they have over there.This is evident at the quality aesthetics from Taiga. Mind you, SE Asia until recently is 2 stroke mad, so they know just about as much as we do on that front. Tyga also make pretty decent 2 stroke pipes from what my contemporaries back home tell me.
____________________
The Tot 2019 Z1000SX - 2007 R1
Never argue with autism

Kye · Scooby Slapper Joined: 13 Sep 2004 Karma :

joeevans · L Plate Warrior Joined: 03 Jul 2005 Karma :

Hi mate,
Ive ordered from that company and can honestly tell you that their customer service is brilliant, they arranged it so i didnt have to pay customs, and i recieved all good within a week. Just remember if your ordering from them shipping costs will be quite high and theres always a high chance of you paying customs. i took a risk by asking to mark it as a gift and placing the order value below a certain amount, which is risky obviously if something happens to it. On that note i would just like to say that i will infact be placing the front end you see on that rossi rep probably on ebay in a few days, as i cartwheeled my NC30 down the road. Its all brand new and still packed in the box it came in. I spent just over a grand on new parts including the tyga front end, including the headlight, and the mudgaurd just 5 days beofre the accident.

gauloises · Scooby Slapper Joined: 12 Dec 2004 Karma :

joeevans thankyou very much. Thumbs Up

Can i ask what have you bought from TYGA which has come to over £1000 (is that the TYGA front end, headlights and the mudguard). Because i was looking to buy the side fairings, front end and the seat unit. Was their anything else that was needed when you bought your front end. Because when you buy the seat unit you have to buy other stuff for it to fit and i was just wondering if this was the same with the front end. I no this may sound silly but would it be possible to carry a pillion if all the legal requirements were met. It wouldn't break or snap off (is what im asking).

Cheers for the help.

Thumbs Up

S.L
____________________
If you tell a lie long enough loud enough and often enough the people will believe it.

Wave2k · G's Stalker Joined: 06 Apr 2004 Karma :

Siggi you havent said one thing on topic
for fuck sake grow up.

also if u ask 400GB for info on them, ull get a better response then here to many idiots.
____________________
Ducati 1299 Panigale
2009 Corvette C6 z51
RS125->CBR400->RXS100->GSXR750K2->Ducati749S->CBR600RR5->TL1000R->DRz400->RSVR1000->Honda VTR SP1->CBR400->GSXR1000K6->Honda H100->CBR600RR3->Ducati1299

joeevans · L Plate Warrior Joined: 03 Jul 2005 Karma :

Hi mate,
Ok firstly the only things you need tp buy with the front end is
1. the fairing (obviously)
2. the headlight
3. you need an NC35 screen NC30 dont fit
it all connects with the oem side panels and in with the fairing you get a meterstay extension bar.

Secondly, It would be virtually impossible for you to carry a pillion mainly beacuase theres no where for them to sit, its made of fibreglass, and the subframe is not designed for it. As i always say nothing is impossible but i would take some serious mods for it too happen

Lastly i didnt spend a grand just at tyga. The tyga stuff cost me 245 with shipping (no customs), i bought galfer wavy discs and braided hoses a custom tail unit designed to house underseat pipes, i had orderd custom pipework, ordered a paint sprayer. Thankfully most companies allowed me to return the stuff or cancel the order without losing TO MUCH money, ive still got the tyga stuff and the custom tail unit that i need to shift plus a knackered bike. if you got any other questions just ask
P.S check out www.400greybike.co.uk the forum is down atm but will soon be back up thats my regular hangout so to speak and imo many are dedicated bikers, who are very helpful Wink

gauloises · Scooby Slapper Joined: 12 Dec 2004 Karma :

joeevans · L Plate Warrior Joined: 03 Jul 2005 Karma :

As with most fibreglass and similar products the fit can be well less than desirable, but with patience it can look beautiful.

The main problem with the front is that theres no adjustment on the headlight itself so to set the beam up correctly you have to move the entire fairing into place which can be fiddly, Tyga have instructions on their website that although are a little vague im sure you'll get the idea.

i think you've got it sussed although couldnt tell you how much it will all come too, i suggest just going through the checkout all the way up untill it gives you the option for which shipping company to choose (theres two) this will give you the price that you can expect to pay. If your interested in saving a little cash we could come to deal on the bits ive got if your interested, i just need shot of it all, although i may have a buyer but have a feeling hes going to pull out...

gauloises · Scooby Slapper Joined: 12 Dec 2004 Karma :

Oh yeah and the rossi rep stickers. Cool

I wouldn't mind coming to a deal with you but what front fairing have you got is it the one with the single headlight or the one that has the long headlight running from one side of the front fairing to the other i think it is called 'spark'.

Cheers Thumbs Up

S.L
____________________
If you tell a lie long enough loud enough and often enough the people will believe it.

gauloises · Scooby Slapper Joined: 12 Dec 2004 Karma :

Sorry forgot to ask, what bits do you have.

Thumbs Up

S.L
____________________
If you tell a lie long enough loud enough and often enough the people will believe it.

Barry_M2 · World Chat Champion Joined: 09 Sep 2004 Karma :

I got my seat unit from them, good fast delivery, top guys, was well packed too.

joeevans · L Plate Warrior Joined: 03 Jul 2005 Karma :

sent you a pm...

tatters · Exxon Valdez Joined: 05 Jan 2004 Karma :

DukeRed · World Chat Champion Joined: 07 Mar 2004 Karma :

*slightly off topic*

Do you reckon you could fit the fairing to any bike with some fabricated bits? TRX is the one I'm pondering.
____________________
Enjoy Life There's Plenty of Time to be Dead
https://www.janoner.com

minesweeper · Whoah there! Joined: 03 Feb 2002 Karma :

https://tyga-performance.com/RC211V_comparison/66.jpg

Its all about this rvf400 rcv rep Cool