>> Fatbar on Clipons..

N1K.CB1 · L Plate Warrior Joined: 13 Jul 2005 Karma :

Hello all! This is my first post here!

I own a honda CB1 and i was wondering how i can replace the clipons with a spare fatbar i have.. is this possible? driving would be much easier and fun i think..

thanx
Nick from Athens
____________________
>> Speeder 4 Life..

N1K.CB1 · L Plate Warrior Joined: 13 Jul 2005 Karma :

noone?
____________________
>> Speeder 4 Life..

Chriss · World Chat Champion Joined: 07 May 2005 Karma :

Only way to know is to try it really?

Probably not what you want to hear mate, but it's all I can think of, sorry.
____________________
TheShaggyDA: I've got 3 or 4 pairs that predate my wife, so at least 11.5 years old.

Kickstart · The Oracle Joined: 04 Feb 2002 Karma :

Hi

Do you mean to fit normal conventional bars?

If so you will probably need a new top yoke (think Lucas make a large range of them, not sure who sells them though).

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

stinkwheel · Bovine Proctologist Joined: 12 Jul 2004 Karma :

Depends on what sort of clipons you have (ie how they fit to the bike).

Sometimes you just need to bolt on a simple raised clamp which are cheap.

Sometimes you can fit a bar clamp that attached round the fork stanchion (you need at least 24mm of exposed fork stanchion above the top yoke to use these. Like on my GPZ500s below). Which are nearly as cheap.

The rest of the time you would need to replace the whole top-yoke. Which is expensive.

Handlebar clamps mounted on fork stanchions
https://www.bikechatforums.com/download.php?id=16289
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

N1K.CB1 · L Plate Warrior Joined: 13 Jul 2005 Karma :

Thanx 4 the answers guys! I'll put a pic of my clipons 2morrow so as 2be sure 4the solution.. I've thought of replacing the top yoke with the one from superfour which doesn't have clipons but since it's more expensive..

Iin general your photo is what i'm talking about! see the pic i put! How these r called!? where can i find them and how much do they cost??

Thanx again guys
Thumbs Up

____________________
>> Speeder 4 Life..

stinkwheel · Bovine Proctologist Joined: 12 Jul 2004 Karma :

https://www.busters-accessories.co.uk/proddetail.asp?prod=RAA
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

N1K.CB1 · L Plate Warrior Joined: 13 Jul 2005 Karma :

thanx a lot mate! don't know if the distance between them when installed is ok for a fatbar or if the fatbar fits them.. i'll try to find something similar here in greece now that i have a picture Wink

____________________
>> Speeder 4 Life..