any 1 got there gears reversed?

[LUXY DJ]

i have!

some bloke i know in a set up shop done it 4 me & its just changed round so u click UP 2 go in 2 1st gear & click DOWN 4 the remaining 5 its better as ur pushing down on most of ur gears which is easier & better & especialy if ur doing a left turn & u wanna click up (ur foot doesnt have 2 go under which cud touch ground) also u dont accidently slip in2 Neutural coz its more pressure on the click pushing down

just wondered if any1 else has this?
____________________
GSXR750
(FAR FAR from standard) www.gixerjunkies.net

[McGee]

I thought that was an expensive thing to have done
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

[Davo]

The only place I've seen that is on a couple of race bikes.

[Dom_]

It's simple to do on the rs50, requires the left hand fairing removed and a 5mm allen key. Just turn the bit the connects the rod to the shaft upside down.

Might try it one day to see what its like.

[Reevo8]

I think ZXR400er has this done or has had it done before! isnt too hard, just involves moving the selector rod I think!
____________________
05 ZX10R, (**05 WKR)

[RealNinja]

[Andy C]

i couldnt imagine having them reversed, would just be wierd, a least you would have a great excuse if people wanted a go!lol (although "its mine" normally fine but still)
____________________
99 RS125 --> 02 SV650s --> 03 Speed Four --> 92 RXS100 --> 93 CB400sf --> 01 CB600f Hornet

[McGee]

Im actually thinking of getting this done on our track bike then..... it sounds really awesome

How much where those rearsets ninja
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

[numark1]

I had it on both my GSXR & ZX6R. I prefer it that way, not sure why.

Also means when leaning hard on the left you can change up without touching the road.

[knockout_bar]

My bike has a strange gear box;

basically 5 down.

Took me a while to get used to doing it without thinking, but it's really nice to use (you can clutchless shift from 1st to 2nd without worrying about hitting neutral ).
____________________
125 trail bike, custom bars, handguards etc. - ?500.

"egg flied lice" - R6jonny (inspired by McGee)

[G]

I've got the option to have it on the r6, basically just a different gear linkage rod.

However, I don't want to risk using it, just need to forget on one gear change and it can all go /very/ nasty if the engine's at high revs and you knock it down.

[Dom_]

[NSR125-Kid-UK]

Do you think I should do it to the RS250? .
____________________
https://www.bikepics.com/members/nsrandy/96rs250/ My Bike!

"I'm either going to teach andy to get his knee down, or I'm going to get him killed. One of the two" - Teaman

[McGee]

Its up to you
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

[wildcat]

I had this done to my vfr race bike, not sure how much it cost because it was paid for by a friend.
It's hard to remember for a while, but you get used to it, it's even harder to get back on the zx6 and remember the right way.

[Type_Mo]

[Ragdoll]

I know it used to be standard on some mopeds about 26 years ago. Can't remember if it was Yam FS1E or not
____________________
1st bike - Honda Rebel; 2nd bike - CBR125; next bike - husband's 'blade hehehehe
Lancashire Bikers Facebook Group

[mr.z]

Isn't that how it is on the honda cub 50/70/90?

Does seem more logical.. old brit bikes gear selectors were on the right and the brake on the left... now that would be confuseing!
____________________
>RidingSkills<->Tech Tips<->MyBikes<

[Jrod]

Yes I did have it done, was cool and easy to ride. switched back in the end as no one could ride my bike. (is that a good thing actually)

[Nath]

Don't do it. Anyone with any sense will think you an idiot when you boast to them about it Just comes accross as the kind of thing done by wankers who spend more time telling tall tales and buying useless crap for their bikes than actually riding them.


But if you are genuinely having problems doing up-changes whilst cornering due to having the bike leant over too far, then by all means go ahead
____________________
Hard livin', hard luck.

[LUXY DJ]

well i got mine done 4 nothing well kinda he set up my forks & rear shock,rear wheel alighlined then chain was tightened,more oil,then the gears & it is piss 2 do & now im getting use 2 it like this im gonna do it 2 all future bikes myself he said IM HAVING IT coz as im new 2 ridin big bikes he said get use 2 it now & i take his word coz this is coming from a 60 odd yr old man whos been setting up road & track bikes 4 over 30 yrs & still races now @ brans hatch so im happs oh & it all cost me........A pearl-diver! & i still aint give him it yet but im gonna tomorrow & also get my 1st gear sorted out unless any one here knows wot the prob cud be? basicly when i pull off from lights it just doesnt kick in good enough like its gonna stall but then BAM it kicks in & its fine thro rest of gears so wtf could this be?
____________________
GSXR750
(FAR FAR from standard) www.gixerjunkies.net

[benc]

its easy to do on a zxr400 its just a case of taking of the gear link at the engine side and flipping it 180. not to sure if it hits on anything as i had all the faring and other bits off at the time. But it is weird to ride with.

[LUXY DJ]

yeah you need to cut away a bit of the fairing


why is my post above hidden? how the fuck is it confusing
____________________
GSXR750
(FAR FAR from standard) www.gixerjunkies.net

[McGee]

Speaking to my mate and he now wants to do it to the track bike Soo looks like we will be doing it if its as easy as you say
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

[TheShaggyDA]