RS 125 Help

[freestyler_onli]

G'day.

First up-it's not my bike- it's a friends.


Basically, she managed to flip her bike and snap the headlight off its holder. The attachments that hold the light in place are snapped and stuck to the headlight with screws.

Looking at the bike-there is nowhere on the rest of the bike in which to stick/bolt the headlight to.

I tried to explain it in a pic- the 2 green markers are on the inside of the frame and are the holders that are attached to the headlight with screws.

They are snapped off and are now held in place on the light as they are still screwed in.

What im asking is- is there anyway i can get the headlight stuck back on or will i have to bodge something together?

[Kickstart]

Hi

Suspect the easiest thing to do is buy another fairing subframe.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[freestyler_onli]

Yes- i was thinking this!

Ok cheers for that!

[freestyler_onli]

I dont suppose anyone knows a good place to get a front frame from?

Jees- try saying that 3 times quickly...........

[Thet2]

if it's the actual plastic bits you are talking about (the 3 studs basically), then you can rebuild them with fiberglass, if you mean the front subframe that keeps the clocks and the speedo, then if you have a pic i might be able to weld it for you, cost of postage, free if it's small job, couple quid otherwise.


cheers

[Kickstart]

Hi

New ones may not be that expensive, but otherwise check Ebay.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[freestyler_onli]

Ok thanks guys!

I'll get back to you as and when and if i need to!