R6, RS250 & SR125 parts

[G]

As per the title, haven't got my fancy-dancy website up yet, but ask away or drop me a pm with what you want.

I've got quite a lot of bits from the r6, probably enough to pretty much make a whole bike minus the main frame. I have an engine, which I will be breaking for indivdual parts.
Model is a 99, but should fit up to 02.

For the RS250, frame, wheels, suspension is gone, but most of everything else including the engine which I'm selling whole.
It's a 96/97 model, so should fit anything before the 98 model.
Also have some track fairings for the 98 model; the front end will fit on the older model however.

Got everything from a SR125, though some bits are a little corroded (ie the chain), others are fine. Including frame with v5, etc.

[Barry_M2]

G,

Rear wheel spindle & chain adjusters + wheel spacers if you have them?

The adjusters, I'm not even sure what they look like. I just need everything required to bolt the wheel to the swingarm. so anything that touches the spindle (less the wheel).

So (I think)....

Spindle
Nut
Spacers
chain adjusters

I've also got a FZR4 project on the go and I'm puting in an R6 rear wheel into a later FZR swinger (well, trying to!).

[G]

H'okay, I'll see what I can dig up.

Some of it is quite hidden and the garage isn't in the best of states, so no promises, may take the weekend or a bit longer (presume you don't need 'em ultra-urgently?)

[Barry_M2]

No hurry chief. I'll just knock a few quid off for every extra day you take!



Cheers G, just drop me a message when you have some news.