Wanted for bandit 12....*desperate*

[StuntMike12]

im after a rear brake assembly for a 97 bandit 1200...need it desperately as its the last thing keeping me from enjoying the sunshine at the moment..

cheers

Mike
____________________
If you can't keep 2 wheels on the ground....one will do

[bidman]

[StuntMike12]

basically after the caliper..hose and master cylinder..need one in decent condition.
____________________
If you can't keep 2 wheels on the ground....one will do

[Kickstart]

Hi

Good luck. The calipers are well known for seizing up so command a fairly good price.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[dr_adams]

no disrespect but wasn't the bandit a parts bin special with bits from other bikes? in which case surely there should be some suzuki with a similar caliper at rear...

[Kickstart]

Hi

Dr_Adams is correct. That caliper was used on loads of Suzukis over the past 20 years.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[dr_adams]

see below

[dr_adams]

According to a certain forum the bandit 12 from 2003 has the same rear as gixxer and busa......
https://cgi.ebay.co.uk/GSXR-750-SRAD-rear-brake-caliper-and-bracket_W0QQitemZ8063914534QQcategoryZ10534QQrdZ1QQcmdZViewItem

https://cgi.ebay.co.uk/Suzuki-Bandit-Rear-Caliper_W0QQitemZ8062443639QQcategoryZ10534QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


Also i noticed while looking at that thesse that a very popular mod to fit the busa shock.... just thought i'd mention it?!?

[StuntMike12]

thanks guys...have looked around and have heard srad calipers will fit...best i can do is keep an ear out...

thanks again
____________________
If you can't keep 2 wheels on the ground....one will do